has PAGEABLE and INTRSAFE flags. PAGEABLE now really means "pageable",
not "allocate vm_map_entry's from non-static pool", so update all map
creations to reflect that. INTRSAFE maps are maps that are used in
interrupt context (e.g. kmem_map, mb_map), and thus use the static
map entry pool (XXX as does kernel_map, for now). This will eventually
change now these maps are locked, as well.
managed pages, into KVA space. Since the pages are managed, we should
use pmap_enter(), not pmap_kenter_pa().
Also, when entering the mappings, enter with an access_type of
VM_PROT_READ | VM_PROT_WRITE. We do this for a couple of reasons:
(1) On systems that have H/W mod/ref attributes, the hardware
may not be able to track mod/ref done by a bus master.
(2) On systems that have to do mod/ref emulation, this prevents
a mod/ref page fault from potentially happening while in an
interrupt context, which can be problematic.
This latter change is fairly important if we ever want to be able to
transfer DMA-safe memory pages to anonymous memory objects; we will need
to know that the pages are modified, or else data could be lost!
Note that while the pages are unowned (i.e. "just DMA-safe memory pages"),
they won't consume any swap resources, as the mappings are wired, and
the pages aren't on the active or inactive queues.
the child inherits the stack pointer from the parent (traditional
behavior). Like the signal stack, the stack area is secified as
a low address and a size; machine-dependent code accounts for stack
direction.
This is required for clone(2).
define a flag UVM_PGA_USERESERVE to allow non-kernel object
allocations to use pages from the reserve.
use the new flag for allocations in pmap modules.
- there are a couple of registers that are reset after the X server finishes,
which do not have the same values as they do when the machine is powered
on. If the two are mismatched you can't write to the video memory.
- video memory is mapped at offset 4MB to keep the X server happy
- there is now a VGA memory mapping
- DEBUG_ET4000 is now a bit more useful for debugging!
* Map the message buffer with access_type = VM_PROT_READ|VM_PROT_WRITE `just
because'.
* Map the file system buffers with access_type = VM_PROT_READ|VM_PROT_WRITE to
avoid possible problems with pagemove().
* Do not use VM_PROT_EXEC with either of the above.
* Map pages for /dev/mem with access_type = prot. Also, DO NOT use
pmap_kenter() for this, as we DO NOT want to lose modification information.
* Map pages in dumpsys() with VM_PROT_READ.
* Map pages in m68k mappedcopyin()/mappedcopyout() and writeback() with
access_type = prot.
* For now, bus_dma*(), pmap_map(), vmapbuf(), and similar functions still use
access_type = 0. This should probably be revisited.
"BUS_SPACE_ALIGNED_POINTER()".
Equal to the param.h "ALIGNED_POINTER()" normally, but obeys additional
requirements of the bus_space_xxx_n() macros. (BUS_SPACE_DEBUG)
pci-bus. The code is called early in the bootphase and tries to initialize
a known type of card into a 'standard' text mode. Wscons should be able
to handle these cards afterwards.
