aecf708ee3
Clean up kernel PTE allocation. Allocate space for maxproc kernel stacks.
...
Bump UVM swap-map to avoid panics on large swap machines.
1998-12-05 07:50:12 +00:00
d4cce0d780
Make ramdisk and ne-tbootable ramdisk-based instkernel on pmax.
1998-12-05 07:33:13 +00:00
92fda0ceb3
Define NLIST_ELF32 for mips native format. Also NLIST_ECOFF (pmax, arc PROMs)
...
NLIST_AOUT (old pmax bootblocks).
1998-12-05 07:30:38 +00:00
ea1aa3511c
#ifdef _KERNEL around cpu_exec_ecoff_setregs() prototype.
1998-12-05 07:26:11 +00:00
b18f6fc2aa
Set VER and REL for miniroot.
1998-12-05 06:42:55 +00:00
6b676a3cca
getcwd() is not equivalent of getwd() if you want to print an error message.
1998-12-05 03:29:25 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
3a08ae9402
always use unsigned numbers for screen positions (for sanity - the libkern
...
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
1998-12-04 20:48:04 +00:00
7fa243e59e
Pass the symbol table size, like a.out.
1998-12-04 20:22:36 +00:00
2d7f8f3343
Support both a.out and Elf32 symbols in DDB.
1998-12-04 20:19:22 +00:00
c89493522f
- Make the ddb_init() interface consistent for a.out and ELF.
...
- Allow DDB to run-time switch for a.out or ELF symbol table support.
1998-12-04 20:18:05 +00:00
05c432cdd9
From OpenBSD: ignore requests with bogus network types
...
Also fix 'from from' -> 'from'
1998-12-04 18:24:16 +00:00
ff669e2e1a
Small bug fix from Soren S. Jorvang (soren@t.dk)
1998-12-04 17:47:06 +00:00
21bf4404e6
GC some unused code.
1998-12-04 17:35:53 +00:00
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
79410cf933
Switch the reloc type to GOT32 earlier, and do not permit GOT32 relocs to be
...
turned into section-relative relocs.
1998-12-04 17:22:52 +00:00
c10f6edafc
AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner.
1998-12-04 11:17:54 +00:00
433c02431e
Init the decriptors at boot time rather than at interface attach time.
...
Now that we have pcmcia hot-plug, it's not the same. Fixes kern/3189.
1998-12-04 11:04:37 +00:00
cdbe530495
No need to #include malloc.h here.
1998-12-04 11:02:30 +00:00
3efc699962
Sanity check a few values in the superblock, to avoid mallocing huge
...
memory area if we try to mount a corrupted filesystem. Fixes kern/3933.
1998-12-04 11:00:40 +00:00
75ff38a27d
- Fix an error in primary cache line size detection logic; when IC and/or DC
...
bit is 1, then line size is 32. Otherwise, 16.
1998-12-04 10:32:08 +00:00
317ff12487
Slight cleanup.
1998-12-04 09:52:43 +00:00
9f33638436
- Fix and improve confusing indentations inside trap().
...
- Don't make a reference of curproc when it has NULL value. It causes
double fault upon a fatal panic ocation.
- Macro FETCH_INSTRUCTION() took a value of address 0.
-
1998-12-04 04:35:44 +00:00
0bba7a7eca
Not used.
1998-12-04 00:17:49 +00:00
1673c21984
Enable `device_register()' for the sparc.
1998-12-03 23:50:11 +00:00
5d9f86821c
Add a device_register() function to determine the boot device.
...
Use it in addition to the old method for a while, so we can take note
of any glitches easilier.
1998-12-03 23:49:58 +00:00
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
6b7fe574f7
Use getcwd(3) instead of getwd(3).
1998-12-03 23:33:10 +00:00
ef51366cb7
Handle flags better.
1998-12-03 20:46:10 +00:00
a68f1ef94c
Handle the case where the device does not support GET_PEPORT better.
1998-12-03 20:43:19 +00:00
bedb40a78c
Use umodem as the modem driver stub.
1998-12-03 19:58:09 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
aa66b9fc72
Use $out correctly, pointed out in pr 6526 by Dave Huang.
1998-12-03 18:17:45 +00:00
244d803bb3
per e-mail with christos: history_next_event() should return -1, not NULL,
...
in case of error, just like history_prev_event() does.
1998-12-03 17:51:16 +00:00
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
3934bd1d8b
More bug fixes from Richard Earnshaw:
...
* Fix problems with moving constants smaller than the word size.
* Fix problems with CSE trying to shortcut PIC references.
1998-12-03 16:05:47 +00:00
dedf21f286
Put back code to use pc-relative branches in the PLT, and avoid doing cache
...
flushes.
1998-12-03 15:56:51 +00:00
26fce3548b
Use the `first' argument to md_fix_jmpslot().
1998-12-03 15:46:28 +00:00
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
1b04131eff
Try a bit harder to detect the physical failure of a component, and to
...
mark that component as dead. Physical failures are handled much better now.
1998-12-03 15:14:40 +00:00
3f3d8e85e6
If a configuration fails due to a non-existant spare, remember to release
...
any previously allocated components before bailing. Credit to Manuel Bouyer
for noticing this.
1998-12-03 15:06:25 +00:00
679de7e878
Fix (potential) referencing of null pointer in (verbose) debugging mode.
1998-12-03 14:58:24 +00:00
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
jonathan