d744db2ea9
Add D-link serial adapter (made by someone else :).
2000-04-21 15:37:50 +00:00
e1950d4ffa
regen.
2000-04-20 23:40:27 +00:00
3e4e60beeb
Add Zip 250.
2000-04-20 23:39:50 +00:00
13c39a5cb6
Put the rasops attributes in conf/files so that everyone can run
...
config(8) without pulling in files.rasops. There is prior art for
this, e.g. audio.
2000-04-20 18:23:37 +00:00
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
173c535a95
Add one, remove some.
2000-04-19 16:17:45 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
5803932005
Regen
2000-04-19 07:52:33 +00:00
01beba012a
Add some Symbios devices.
2000-04-19 07:51:20 +00:00
a2bf544200
Allocate the variable `inqbuf' in scsi_probedev on stack rather than
...
statically. Since this function may called for another luns immediately,
allocating it statically doesn't make sense and may cause race condition
as pointed out by PR#9749.
2000-04-19 04:49:50 +00:00
debe6e88b6
Calculate an offset of mailbox_in correctly by renaming BHA_MBO_OFFSET
...
to BHA_MBX_OFFSET and using it also for mailbox_in. Since all mailboxes
should be placed in a single continuous memory due to a hardware limitation,
an offset of any mailbox can be/should be calculated using a same expression.
2000-04-19 02:39:12 +00:00
edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
5845348e54
Revert last change (the last change was not necessarily desirable, and
...
had some other minor side-affects that were troublesome).
2000-04-17 19:35:12 +00:00
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
0ba1516cd7
Use a default attribute to restore the display mode to original settings.
...
Also, pass in WSATTR_COLORS at all times when allocating screen attributes
since without it we cannot even get black-on-white from rasops(9).
2000-04-16 21:49:49 +00:00
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
0aae0cd7a6
only print packets if debug > 1
2000-04-16 17:03:42 +00:00
9403f3fec8
Reset the device before starting the init sequence.
...
Add shutdown hook.
2000-04-16 09:55:39 +00:00
c71398f7a9
Don't allow configuration where the specified SectPerSU may result in IO larger
...
than MAXPHYS being sent to underlying devices. Addresses PR#9868.
Will change if/when MAXPHYS goes bye-bye.
2000-04-16 03:24:26 +00:00
6d6ad52fd4
Regen.
2000-04-15 15:57:59 +00:00
f6b73a654c
Add another camera.
2000-04-15 15:57:27 +00:00
8c1897c2fd
Also add the Intel ID for the LAN+MODEM56 card to the csdevs list to get
...
it working.
2000-04-15 06:29:25 +00:00
501c07e5d4
Add an "iopener" keymap variant, giving us.iopener and
...
us.iopener.swapctrlcaps. This makes F1 ("Back") into Escape, and shifts
the other keys over by one, so F2-F12 ("Forward"-"Home") become F1-F11.
2000-04-14 23:11:08 +00:00
321bc31690
Remove spurious splx() call.
2000-04-14 20:33:48 +00:00
c56f4bceb8
Fix some callout fallout. Hi Jason!
2000-04-14 19:31:50 +00:00
b6ef06e018
Add a file I forgot.
2000-04-14 18:15:47 +00:00
2ed37fcf5d
Add driver for FTDI FT8U100AX serial adapter.
...
XXX This is still experimental and needs more work.
2000-04-14 14:51:22 +00:00
219f3c9ccf
More debug.
2000-04-14 14:41:35 +00:00
1767c08cba
Add a capability for pre/post processing on write/read.
2000-04-14 14:21:55 +00:00
3149043619
Add a driver for the Rio 500 MP3 player.
...
XXX This driver might go away again, since you can do it all with ugen.
XXX But this driver is compatible with the Linux driver so there are
XXX programs for it.
2000-04-14 14:20:02 +00:00
0839e2a0d9
Regen.
2000-04-14 14:15:41 +00:00
471d06cfbc
Rename FUTURE to FTDI.
...
Add the funky little D-Link radio.
2000-04-14 14:14:48 +00:00
017ca78459
Make attach of ugen work as it should so product&vendor locators can be used.
2000-04-14 14:13:56 +00:00
e44f0f1147
Support for SIGIO.
2000-04-14 14:12:47 +00:00
eaaf682603
Fix a typo in a comment.
2000-04-14 14:12:11 +00:00
e1f94170e5
Generate a diagnistic dump on "Host Controller Halted".
2000-04-14 14:11:36 +00:00
dfe176302c
add some casts to (u_long) to shut up gcc
2000-04-14 08:22:49 +00:00
e3f576a688
disable function after attach
2000-04-13 16:17:55 +00:00
90bee16298
enable com at cardbus
2000-04-13 11:18:24 +00:00
8fba568264
cardbus attachment for com devices (thanks to Chris Demetriou and
...
Darren Reed for constructive criticism and help with testing)
2000-04-13 11:17:53 +00:00
3692f27c7d
regen
2000-04-13 10:13:12 +00:00
augustss