jonathan
cd58cb9caa
Factor out r3000 versus r4000 differences (CLKF_USERMODE() and CLKF_BASEPRI()),
...
provide r3k and r4k versions of each, and move to sys/arch/mips/include.
Note in comments where each mips-based port should provide
definitions in its own cpu.h after including this file.
1996-03-23 20:21:49 +00:00
jonathan
cc54da72aa
Just include the merged pica/pmax r2000/r4000 mips_opcode.h from
...
mips/include/mips_opcode.h.
1996-03-23 19:10:06 +00:00
jonathan
78aac1c7b9
Merge in additions of missing MIPS-I opcodes, and r4000-in-32-bit mode
...
opcodes from the Pica port. Per Fogelstrom claims the latter are all
supposedly MIPS-II (r6000) instructions, rather than MIPS-III (R4000),
but we haven't checked to be sure. Are LL/SC really in MIPS-II?
CVS:: ----------------------------------------------------------------------
1996-03-23 18:49:29 +00:00
is
ad32891e83
State explicitly that the install kernel needs the root and swap
...
partition on the same disk.
1996-03-23 15:21:39 +00:00
is
a6a8779b4e
It looks like the sense_data structure lost the extended_ prefix in the
...
name of some of its members. Adapt sbic.c to this. (Fixes PR 2245)
1996-03-23 15:09:54 +00:00
scottr
ecd20bc823
Add PPP compression options
1996-03-23 06:12:11 +00:00
scottr
6bd0c1ff9b
In link_down(), give a second arg to the close function. Fixes
...
a SEGV when pppd closes the link.
1996-03-23 05:43:11 +00:00
jonathan
bfb10e5bdf
Rename "pmax_elf_makecmds()" to "mips_elf_makecmds()".x
1996-03-23 04:59:00 +00:00
jonathan
8fb3add520
* Change setregs() to copy the initial entry point to $t9, to support PIC
...
code following the MIPS ELF abi.
* Move the kn01 interrupt handler outside of #ifdef DS5000, to support
3100-only kernels.
* Add #ifdef DS3100 around kn01_enable_intr() to allow configuring
turbochannel-only kernels.
Configuration-time support for specific models of DECstation still needs
more thought/work.
1996-03-23 04:35:03 +00:00
jonathan
1ca217b445
Replace the following header files from src/sys/arch/pica/include/
...
with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
ansi.h bsd-aout.h cdefs.h ecoff.h elf.h endian.h exec.h float.h ieeefp.h
kdbparam.h limits.h pcb.h pmap.h proc.h profile.h ptrace.h reg.h regdef.h
regnum.h reloc.h setjmp.h signal.h stdarg.h types.h varargs.h vmparam.h
NB: Some files (e.g., limits.h reloc.h pmap.h) add pica-specific #defines
to the generic mips support.
1996-03-23 03:42:25 +00:00
mrg
e5e3e0877a
add a SIGTERM handler to unmount the portal fs when killed. also put the
...
right PID in the mount table. from pr#893 <kstailey@leidecker.gsfc.nasa.gov>
1996-03-23 02:37:48 +00:00
jtc
be21c16fa0
hack to limit termcap strings to 1024 characters
1996-03-22 23:25:30 +00:00
gwr
daef0ae82a
The ramdisk is now a pseudo-device.
1996-03-22 23:02:02 +00:00
leo
634f5ade49
Correct #ifdef that survived the after-debug cleanup (Thanks Chris).
1996-03-22 09:07:03 +00:00
thorpej
44dcfee5ea
Move an #ifdef FIFO so this compiles on a SPARC (-Wall) if FIFO is not
...
defined.
1996-03-22 06:51:04 +00:00
scottr
f699270742
Overwrite existing snapshot kernel files when gzip'ing.
1996-03-22 05:14:27 +00:00
cgd
caf3bddd6f
make this a little bit closer to the pcivar.h header; no reason to
...
be gratuitously different in some places. (just cosmetic changes.)
1996-03-22 03:31:33 +00:00
mrg
59b7f344f3
add note about why we use /usr/sbin/sendmail.
1996-03-22 03:20:53 +00:00
cgd
780657a591
don't export eisa_cd. Drivers shouldn't need it, and, indeed, if they
...
do, they're probably doing thing the Wrong Way.
1996-03-22 02:43:54 +00:00
jtc
e522ca37ad
Changed _catopen() to always return ((nl_catd) -1) on error, and
...
changed _catgets() and _catclose() to special case catd's == -1.
This change fixes PR#2190, and brings _cat*() closer to XPG4.2
compliance.
1996-03-22 01:11:49 +00:00
mrg
014cccd163
now that sendmail supports SIGHUP, call sendmail with full path.
1996-03-22 00:44:59 +00:00
gwr
ac302c84e6
Correct type of the nofault pointer.
1996-03-21 23:03:49 +00:00
gwr
edf28f2285
Catch-up with cf_driver/cf_attach changes.
1996-03-21 23:01:21 +00:00
gwr
3143afbd6a
Fix typo
1996-03-21 22:37:26 +00:00
is
2ecf0a7b85
Interupts must be disabled and cleared before the PROM is read, as the int
...
line is shared with one of the PROMs address lines.
From PR #1478 by Jukka Marin.
1996-03-21 21:00:21 +00:00
is
381d40e063
Fix (critical) typos in installation document.
...
Closes PR 2230 by Thorsten Fruehauf.
1996-03-21 20:25:26 +00:00
jtc
ffdb8fb7c8
nsquery and nstest are no longer part of bind (or NetBSD)
1996-03-21 19:52:40 +00:00
jtc
04b0ab5344
Be pedantic, main() returns int in Standard C.
1996-03-21 18:30:19 +00:00
jtc
cac62b2d65
Be pedantic, main() returns int in C.
1996-03-21 17:56:15 +00:00
scottr
32a38f24e7
DEBUG -> SBC_DEBUG, and fix comment regarding sbc_options
1996-03-21 04:49:20 +00:00
scottr
3166ff9f2f
Add a SDEV_NOLUNS quirk for the Epson OMD-5010 removable MO cartridge drive.
1996-03-21 03:29:40 +00:00
jtc
fd08cf75d8
Handle null string in re_comp.
...
From Kazushi Jam Marukawa <kazusi-m@is.aist-nara.ac.jp> in PR 2196.
1996-03-21 03:11:13 +00:00
jtc
5f1b7809e2
fix damage caused by sccs (long ago)
1996-03-21 01:36:28 +00:00
mrg
301aee8168
libkvm has totally changed, bump major version.
1996-03-20 23:11:56 +00:00
fvdl
c0d2b279c6
Make sure not to free the reply mbuf twice. Should fix PR #2240
1996-03-20 21:59:56 +00:00
mark
cb3bacff44
Added abort function that just hangs in an infinite loop.
...
GCC/arm addeds calls to abort to the end of functioned declared
as not returning e.g. panic().
1996-03-20 18:57:58 +00:00
mark
9adb4b41cb
Make this work following the attachment changes.
1996-03-20 18:49:56 +00:00
mark
6973956563
Fixed references to match function.
1996-03-20 18:46:58 +00:00
mark
c8d47951ba
Fix references to the match function.
1996-03-20 18:38:00 +00:00
is
ab622e51f5
- Zeroth version of M68060 support (dont want to cause emulation traps for
...
the "Fast Assembler Version of the copy loop)
- Yet another sanity check included: initialize unused receive buffers to
zero sender id; and test for sender hardware id of zero in the receiver.
Gives us better error messages in case flaky hardware causes spurious
receive interupts.
1996-03-20 13:28:50 +00:00
leo
8106a55133
And more proto's.....
1996-03-20 13:11:56 +00:00
leo
e0aeb3dc13
Another bit of prototyping...
1996-03-20 12:41:30 +00:00
jonathan
212f41c0da
Merge more header files with arch/mips/include, by replacing
...
with versions that #inlude the <mips/XXX.h> file:
reloc.h regnum.h varargs.h
1996-03-20 09:49:29 +00:00
leo
083fa0d1b9
Belongs to the last changes made to the ??boot/??boot.s files I did
...
yesterday.
1996-03-20 08:23:35 +00:00
tls
da9420b27e
Add FreeBSD object files; close out pr#1719
1996-03-20 08:20:21 +00:00
leo
7b7df70d77
Fix typo in neew config changes.
1996-03-20 08:17:48 +00:00
scottr
0b59005d3d
Fix a long-standing bug uncovered by the new device attachment
...
model. Thanks to Jason Thorpe for the fix (fixed PR 2235).
1996-03-20 05:10:54 +00:00
tls
9f01fb5000
apply Thorsten's patch to add gettytab support to telnetd.
1996-03-20 04:25:53 +00:00
jonathan
69a70ec129
Merge in changes from the Pica port.
...
Still needs more thought for single-stepping and process_write_regs().
1996-03-20 01:30:49 +00:00
jonathan
5d4883f9ed
Add "mips" to the machine line, to make config create a link
...
compile/XXXX/mips -> mips/include, and to use mips/conf/files.mips.
1996-03-20 01:17:06 +00:00