b6e4b26d3b
Check 80 pins cable in acard_setup_channel() for Acard ATP860.
2001-08-23 10:02:25 +00:00
29bfa727c1
Regen; take part numbers out of PCnet-PCI product descriptions.
2001-08-23 03:42:26 +00:00
16efbbf387
Take part numbers out of the PCnet-PCI product descriptions.
2001-08-23 03:41:36 +00:00
2c469bbf82
Regen; Add Promise ATA/100 TX2.
2001-08-23 03:32:24 +00:00
915a8ef871
Add Promise ATA/100 TX2 device ID.
2001-08-23 03:31:55 +00:00
10591340be
Add a PCI_NETBSD_ENABLE_IDE option, that goes along with
...
PCI_NETBSD_CONFIGURE, which tells machine dependent code
to enable the specified (by a bitmask) PCI IDE channels in
the southbridge, in the event that system firmware does not
do so.
2001-08-22 00:36:57 +00:00
b9f24a3dd1
Regen.
2001-08-20 19:29:59 +00:00
69906a3032
Add some entries for the AMD 76x chipset for completeness.
2001-08-20 19:29:08 +00:00
1e378c4c12
precede, not preceed.
2001-08-20 12:00:46 +00:00
fb5869c240
Regen
2001-08-20 03:48:29 +00:00
f0dd0ada57
Add NEC USB2.0 Host Controller
2001-08-20 03:45:55 +00:00
13f671edcf
Improve intr_ack code to support for 3c556,3c556B.
...
Some cards don't have an interrupt acknowledge
register in PCI config space, so we map and write
it, such as CardBus driver does.
2001-08-18 05:49:28 +00:00
2d4c311492
Regen; added Avance Logic ALS4000.
2001-08-18 05:00:51 +00:00
563f369b78
Add Avance Logic ALS4000 Audio.
2001-08-18 05:00:21 +00:00
864924f7f3
regen.
2001-08-17 23:14:40 +00:00
211070f3bd
Add Apple Uni-N (as used in QuickSilver) product IDs.
2001-08-17 23:14:00 +00:00
4f3eac8332
mtod() with uintptr_t, not bus_addr_t.
2001-08-14 11:57:26 +00:00
c9fa7a702a
add (u_long) casts for sparc64.
2001-08-14 11:55:38 +00:00
6c1314f4b8
Add Transmeta and products, and an ALI integrated sound/modem device.
2001-08-13 08:51:38 +00:00
efdadcb7dc
Properly set/clear IFF_OACTIVE.
2001-08-07 16:53:06 +00:00
3c508a8790
Add support for the PCI-400 card and correct the clock rate for all the
...
VScom/Titan cards.
2001-08-06 22:25:36 +00:00
5243b06e38
Improvement: allocate one page of dmamem for Rx, Tx and nullbuff instead of
...
3 different ones.
Also pass the rigth seg/nseg to bus_dmamem_free().
Correct types in debug printf's
2001-08-06 19:20:26 +00:00
de108bd82d
Add enable/disable hooks on devices that have ACPI power management
...
capability, using D3 and D0 power states. This saves me quite a bit
of battery when not using the built-in Ethernet on my IBM T-20 during
long IETF meetings.
2001-08-05 23:39:59 +00:00
74954dadf9
use unsigned variable types as appropriate
2001-08-05 18:07:51 +00:00
fcc522e5ce
It seems the fixed rate versions are actually fixed at 48 kHz, not 44.1 kHz.
2001-08-04 22:15:56 +00:00
7c292e3d22
- kill the carrier detect code. It's not usefull any more and can give
...
false informations on a loaded ethernet segement.
- convert to bus_dma(9) (better late than never :)
- add proper le32toh/htole32 so that it works on big-endian system (tested
on macppc).
Close PR kern/10327.
2001-08-03 16:53:08 +00:00
e7021f649d
Remove unnecessary test.
2001-08-03 14:10:16 +00:00
38016b0ba8
Fix some typos in newer ALi M5229 support. Approved by bouyer.
2001-08-03 01:31:08 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
2c44aa6dfd
Remove unused pciide_print() declaration. From OpenBSD.
2001-08-01 16:29:21 +00:00
f8e21592da
regen
2001-07-31 22:30:07 +00:00
b2c29c20ae
Add pci ids for the Intel 80312 I/O companion chip for the
...
Intel 80200 XScale processor.
2001-07-31 22:27:25 +00:00
aae284be36
Oops, put back the initalization of "done" in mly_thread().
2001-07-31 02:07:14 +00:00
5226d11119
Assume that me->lun contains the device number if this event is for a
...
logical device.
2001-07-30 23:49:51 +00:00
2fa020ae0b
- Forget to report events from logical devices.
...
- Cosmetic changes.
2001-07-30 23:46:28 +00:00
12c4049d31
Don't match boards with a PCI class code of `I2O'.
2001-07-30 23:29:08 +00:00
8fc6974449
Oops, make Rx interrupt deferral actually work.
2001-07-30 20:12:10 +00:00
3b1828355b
Add a driver for Mylex AcceleRAID and eXtremeRAID controllers with v6
...
firmware. Based off the FreeBSD driver, and re-worked by tls, erh and I.
2001-07-30 19:59:04 +00:00
690c5b1ae3
Enable the Acard UIDE controllers by default.
...
My WDC MDMA-only (non-UDMA) drives did not work on the Acard controllers,
but it turns out that the problem was not Acard specific.
These WDC drives do not work on the ESS ISAPnP wdc port nor on
macppc obio wdc port neither, and another Quantum MDMA-only drive
works fine on the Acard.
These WDC drives work fine on my i386 pciide (which is initialized
by the BIOS), so maybe we have to do something in MI wdc to initialize
such drives properly...
2001-07-28 12:07:11 +00:00
4ec277f9ee
regen
2001-07-28 00:33:43 +00:00
70cd305a5d
3c556 V.90 MiniPCI modem
2001-07-28 00:33:01 +00:00
fab087b3a2
Tell the MII layer to advertise PAUSE capability, and configure
...
the chip's PAUSE threshold.
2001-07-27 22:46:20 +00:00
8e2205572d
Better support for newer ALI M5229 chipsets: support Ultra/66 for rev >= 0xC2,
...
Ultra/100 for revs >= 0xC4.
The the generic PCIIDE interupt routine for chipsets rev >= 0xC2 in native
mode, it seems that newer chipsets don't have the ACER_CHIDS register :(
From Linux and FreeBSD.
2001-07-26 20:02:21 +00:00
4950b7867f
Map both memory and IO space, but prefer using memory space.
2001-07-26 15:35:20 +00:00
7a92f3b65a
Don't map I/O space if we have already have a good memory mapping.
2001-07-26 12:36:16 +00:00
799abef5f4
Jumbo frames do not currently work (chip goes catatonic -- silicon bug?),
...
so don't set the capability.
2001-07-25 15:44:48 +00:00
1dfe605642
Match the Antares Gigabit Ethernet.
2001-07-25 01:48:14 +00:00
560fc018c4
Regen; Added Antares Gigabit Ethernet.
2001-07-25 01:45:55 +00:00
4ac142a1d3
Add the Antares Microsystems, Inc. vendor ID, and the product ID
...
for their Gigabit Ethernet board (a TC9021 board targeted at the
Sun market).
2001-07-25 01:44:59 +00:00
6b0e779ce6
Remove a debugging #define.
2001-07-25 00:12:33 +00:00
tsutsui