380035a59d
Regen.
2000-01-13 20:16:49 +00:00
81ae0fb432
Add a Broadcom PHy used in the D-Link USB100 adapter.
...
There's no special driver for this PHY (yet).
2000-01-13 20:16:08 +00:00
03c8221ad0
Use BMSR to test for `negotiation complete'; the alternative bit in the
...
LXT vendor register 20 is latching high and resets to low on read causing
subsequent status request to return `IFM_NONE'.
1999-12-21 10:47:00 +00:00
b67d4809ed
Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
...
Ethernet PHY.
1999-12-07 19:36:37 +00:00
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
6c50cb64e1
Common module for bit-bang'ing the MII.
1999-11-17 17:47:59 +00:00
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
00ba1a42eb
Fix a braino in some currently-disabled code.
1999-10-27 19:05:44 +00:00
be9104dd8d
Define ANAR and ANLPAR bits that are used to negotiate the 802.3x PAUSE
...
feature.
1999-09-29 22:49:33 +00:00
45a337e088
Add a PHY `offset' (e.g. "first PHY on bus, second PHY on bus, ...") to
...
the PHY's softc.
1999-09-25 00:10:13 +00:00
6c591e77d0
Fix botched RCS IDs.
1999-09-16 05:58:18 +00:00
60feba0646
Spacing.
1999-09-07 21:52:06 +00:00
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
f04cb4036f
move common support functions for phy drivers from mii.c to mii_physubr.c,
...
so that they are not includes if no PHY is configured
(avoids code bloat if an interface driver has the "mii" attribute but
mii is not used by the particular version)
1999-08-03 19:41:49 +00:00
e314d1d844
Correct the sense of the PCR_FLINK100 bit. From Dave Sainty, PR #7832 .
1999-07-14 23:57:36 +00:00
50f084159c
SCTRL2 register number wrong. PR #7756 , Johan Danielsson.
1999-06-20 16:42:37 +00:00
23ddff5688
use the new "xx" prefixed OUIs because the mapping to the ID register
...
bits differs from the MII_OUI() way
1999-05-14 11:40:28 +00:00
48c49dcb82
regen
1999-05-14 11:38:05 +00:00
416a47bc88
Define OUIs in a more uniform way. OUIs are fixed entities registered
...
with IEEE, so use the "real" OUIs for definitions.
Now unfortunately vendors differ in how the MII ID register bits are
used wrt bit and byte ordering. There is a straightforward way - bits
numbered from LSB to MSB - used by AMD, Intel, NS and QS. This is used
by the current MII_OUI() conversion macro. ICS, Seeq, SiS and TI count
the bits as they appear on the wire, and some differ completely.
Account for these cases by "xx" prefixed OUI definitions which compensate
for this, so the MII_OUI() macro can still be used.
Add AMD (the "real" AMD this time) and the 79c973 PCnet internal PHY.
1999-05-14 11:37:30 +00:00
5ea46286eb
mii_phy_auto(): don't rely on an implicit declaration of the waitfor argument.
1999-04-26 14:48:57 +00:00
83f9ab3c87
Implement asynchronous autonegotiation when driven by the MII tick
...
(one-second clock). Prevents .5s delays every 5 seconds when the interface
is up but there is no link. Fixes PR 7361.
1999-04-23 04:24:32 +00:00
01ea9a1dd8
Regen.
1999-03-24 21:07:26 +00:00
029f0b9d86
Silicon Integrated Systems OUI and the SiS 900 PHY model number.
1999-03-24 21:07:04 +00:00
58beb19c16
Regen.
1999-02-05 20:20:04 +00:00
53089c1ade
Add oui for Davicom Semiconductor, and add Davicom DM9101 10/100 PHY.
1999-02-05 20:19:44 +00:00
f9467ddb8e
Some PHYs are really braindead, and report incorrect IDs. Simplify the
...
test for this, and probe for PHYs based on media in the BMSR.
1999-02-05 02:46:34 +00:00
f9e92fac23
Fix bit test
1999-01-29 07:35:05 +00:00
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
c755434d9d
Regen.
1998-11-05 03:43:57 +00:00
84def70194
Add AMD's OUI, and the model number for the AMD 79C873 10/100 Ethernet PHY.
1998-11-05 03:43:43 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
augustss