cf83f4ae57
Use delay by default on hpcmips for now.
2000-01-27 01:05:17 +00:00
e00a11df5e
Make it easy to switch between using attribute memory and not.
2000-01-26 22:28:38 +00:00
b1ec3fa901
Give the ISV filter a chance to verify 21143 pass 4.1 SROMs before running
...
them through the quirk table.
2000-01-26 16:51:11 +00:00
063cb5e5dc
Additional hackery for the Cobalt interfaces. Even though these are
...
pass 4.1 21143s, they have a 128-byte SROM, and thus use a different
SROM address size than all other pass 4.1 21143s.
A plea to hardware designers -- *please* read application notes for
the components you're using before putting your hardware together. Thanks.
2000-01-26 15:50:52 +00:00
57d2439d74
Try to avoid accessing the HC if it is dead. Suggested by mycroft.
2000-01-26 10:04:38 +00:00
653eefc8f4
Add cardbus detach functionality. Add a function
...
cardbus_detach_card() in cardbus.c and enable detach code in cardslot.c
2000-01-26 09:04:59 +00:00
639bd74d21
Pccbb manages interrupt handlers by itself for its child device.
2000-01-26 09:02:41 +00:00
4656f0ba52
Remove the FreeBSD support from this file. It hasn't worked in FreeBSD
...
for some time, and only made the code harder to read.
2000-01-26 06:41:11 +00:00
422cc09430
First attempt at a CardBus front-end for the `ahc' driver. This will
...
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.
2000-01-26 06:37:23 +00:00
494b4a9ed3
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 06:27:32 +00:00
a697dac5f2
Back out a change I didn't intend to commit.
2000-01-26 06:17:59 +00:00
8949eab0cb
Split the code that reads the SEEPROM into its own file.
2000-01-26 06:04:37 +00:00
3d3f376619
Print out what kind of card it is earlier and more accurately.
2000-01-26 02:25:47 +00:00
dc4e418fa6
Add the Linksys Etherfast 10/100. These are currently being rebadged
...
as the NetGear FA410TX 16-bit PC Card.
2000-01-26 01:27:12 +00:00
62c4800e7f
Argh - add initialization that got lost during editing of previous addition.
2000-01-26 01:23:32 +00:00
def54ed969
Regen.
2000-01-26 01:06:03 +00:00
a73e3e37b1
Add the Linksys Etherfast.
2000-01-26 01:05:23 +00:00
2bd8866643
"i/o" -> "memory"
2000-01-25 23:23:48 +00:00
1f723151f2
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:32:20 +00:00
7360584deb
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
(XXX is the hack still necessary?)
2000-01-25 22:31:06 +00:00
4f1e715248
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:30:04 +00:00
62fb37ba49
Some changes for the Xircom X3201-3 in 21143 emulation mode:
...
- The Xircom doesn't bring itself out of reset; we have to do it.
- The Xircom requires transmit buffers to be aligned to 4 bytes, too.
Partially from Rafal Boni (though the Tx buffer alignment issue is
handled much differently in this version).
2000-01-25 22:11:12 +00:00
27cb56c54d
Regen.
2000-01-25 21:58:59 +00:00
8b39eb4d8e
Add Digi International adapters.
2000-01-25 21:58:45 +00:00
a81c1788ab
Regen.
2000-01-25 21:58:23 +00:00
3a9b991c44
Add Lexar Media CF.
2000-01-25 21:58:06 +00:00
701cc4b663
Add support for the Xircom X3201-3 in 21143 emulation mode. This chip
...
appears on some Xircom and Intel RealPort(tm) cards.
From Rafal Boni, with some slight modifications from me.
2000-01-25 21:50:30 +00:00
e81d123f6d
try to dtrt for sector sizes <DEV_BSIZE (at least, don't divide by 0)
2000-01-25 20:42:33 +00:00
6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
da499b1e3a
make the wait_ready loop use pcic_delay() (thus tsleep) too for cards
...
that take a while to become ready
2000-01-25 19:38:18 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
3f72e2e3f9
Oops; fix a bug in the previous:
...
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
2000-01-25 18:04:07 +00:00
b9a4fe55b5
Switch the HSE and HCPE messages. Pointed out my mycroft.
2000-01-25 17:31:05 +00:00
9d17b2ca6a
bring in stabilization codes in freebsd PAO/bsdi cnw driver.
...
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
not enabled by default - try it if you see performance problem on
heavy traffic)
2000-01-25 16:48:47 +00:00
c02060ba9b
Regen.
2000-01-25 15:44:21 +00:00
d1c481fc31
Fix a typo.
2000-01-25 15:43:59 +00:00
e33c595472
Do a CARDBUS_BM_ENABLE just to be sure.
2000-01-25 15:29:43 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
0335569abc
Make it compile even if you leave out the ucom attachment.
2000-01-25 13:56:23 +00:00
a27ee91364
Remove an item.
2000-01-25 13:27:07 +00:00
f0ebd281e5
Add done method for root control transfers.
2000-01-25 12:06:21 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
enami