Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
61,562 Commits 606 Branches 0 Tags 3.1 GiB
d610ec4cb0
Commit Graph

7117 Commits

Author SHA1 Message Date
soren
d610ec4cb0 Add Norwegian keymap from Haavard Lygre. 2000-03-05 08:56:53 +00:00
elric
23af6e53fd Moved things around a bit so that TGA2 can be used as a console. 
Addresses PR:  port-alpha/9542
 2000-03-05 07:57:52 +00:00
elric
1dfdd10eae I got the mode sense bits of the monitor wrong they needed a twiddle (~). 2000-03-05 02:30:57 +00:00
tron
c98328e9df Regen from "pcidevs". 2000-03-04 13:24:24 +00:00
tron
947ec630de Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in 
PR kern/9533.
 2000-03-04 13:23:26 +00:00
elric
f939818426 Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC 
code out into ../ic/bt485.c.  Disabled tga_bt463.c, which we don't
currently support.
 2000-03-04 10:27:59 +00:00
elric
b16807c51a Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c. 2000-03-04 10:25:57 +00:00
elric
c4019af322 Definitions of standard TGA monitors as used by DEC. 2000-03-04 10:25:07 +00:00
elric
7428bb6ffd Definition of struct monitor, which contains syncs, and dot clocks. 2000-03-04 10:24:34 +00:00
elric
fec44d6f55 Header for a generic RAMDAC that can be reused between different 
graphics cards.
 2000-03-04 10:23:39 +00:00
oster
1231bd6d14 Umm... don't allow attempts to configure the same RAID device multiple times. 
The check was there, but the return() was missing :(
 2000-03-04 06:03:21 +00:00
mhitch
3b06f6f887 Fix boot device detection. Device probes are not done when adapters are 
configured, but after all adapters have been configured.  When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot.  The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller.  Then when the disks are configured, dk_establish()
matches the appropriate controller.
 2000-03-04 05:43:51 +00:00
oster
0049933f0f Reorganize some comments. 2000-03-04 04:22:34 +00:00
oster
194aba4e41 Garbage collect the (already disabled) "random" queue type. 2000-03-04 03:27:13 +00:00
oster
612e2e8f92 Nuke an unneeded #define. 2000-03-04 03:22:17 +00:00
is
d8bf2eb8ef - we didn't write enable toe config1-3 registers before trying to set the 
media.
- read out original settings to find out what the defaults (EEPROM) for this
  board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
 2000-03-03 21:37:18 +00:00
oster
88a8d06a0b Use the common disk allocation code, rather doing things the old way. 2000-03-03 03:47:17 +00:00
oster
142175b1a1 Minor formatting cleanup. 2000-03-03 03:10:03 +00:00
oster
7b1139520e More minor cleanup. 2000-03-03 02:04:48 +00:00
oster
87f46374bb Minor cleanup. No functional changes. 2000-03-03 01:46:36 +00:00
augustss
2dda67d4a2 Fix typo in argument to ratecheck(). 2000-03-02 15:49:29 +00:00
augustss
d6c4ac7ff2 Use ratecheck() to limit error messages on disconnect. 
Break out some common functionality.
 2000-03-02 12:37:50 +00:00
enami
e924f6f853 Minor cleanups. 2000-03-02 10:29:22 +00:00
enami
48721f291a Fix typo and thinko in previous commit. 2000-03-02 05:54:22 +00:00
enami
027db8bf87 Add ifmedia support so that dhcp happy. Also, add nwid support. 2000-03-02 05:00:47 +00:00
enami
a5921b902e Check if device is active in the interrupt handler and the one second 
tick handler.
 2000-03-02 01:21:56 +00:00
thorpej
285a315e99 Simplify the winlist code. 2000-03-01 23:40:26 +00:00
thorpej
ac1b683642 Amend previous; pay attention to EX_CONF_MII on deactivate, too. 2000-03-01 20:53:11 +00:00
thorpej
448dfa4249 Only detach PHYs if we have MII in the first place, and remove a bunch 
of #if 0'd code which was copied from the Tulip driver.
 2000-03-01 20:51:50 +00:00
thorpej
54e0e80815 Cosmetic change. 2000-03-01 20:50:56 +00:00
thorpej
08483fcddc When unmapping these on detach, pass the BAR to unmap (not the type of 
the BAR!!)
 2000-03-01 20:50:37 +00:00
augustss
3218dd992d Protect the use of bpf_mtap so bpf isn't needed. 
aue: Limit the number of error messages at disconnect by using ratecheck().
 2000-03-01 19:00:51 +00:00
augustss
ba4e755a9c Change the cmd argument in {audio,mixer}_ioctl() to u_long. 2000-03-01 00:44:35 +00:00
augustss
7d05674ba7 Distinguish between device and interface classes. 
(I finally found a document that said that they were different.)
 2000-02-29 21:37:00 +00:00
hubertf
a6a5be8ccf This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter 
(3C460), rev 1.00/2.05
 2000-02-29 19:08:09 +00:00
hubertf
b95fbdaeb7 Regen 2000-02-29 19:07:33 +00:00
hubertf
eff003f7ce add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460), 
rev 1.00/2.05
 2000-02-29 19:06:40 +00:00
oster
8cde772948 Oops.. Need to note the parity status when we unconfigure. 
Noted by Aaron J. Grier. (Thanks!)
 2000-02-29 16:54:29 +00:00
ad
c09a9a072f Oops, pasto. 2000-02-29 11:14:46 +00:00
thorpej
d788e0dbad Make sure to initialize xs->req_sense_length (to 0). This appears to be 
a historical leftover, and very few drivers actually look at it.  But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
 2000-02-28 17:44:20 +00:00
takemura
32817a3257 WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong. 2000-02-28 12:34:31 +00:00
joda
c627d45cc3 (fxp_init): don't clear the FXPF_MII flag as this results in a panic 
when detaching
 2000-02-28 10:16:17 +00:00
jdolecek
86ae2ab1fc Add ADEV_NOSENSE quirk for HITACHI CDR-7730. 
Patch sent by Hume Smith in kern/9489.
 2000-02-28 09:46:25 +00:00
mycroft
a87f80ad5f Give the VPP bits better names. 2000-02-28 07:33:08 +00:00
mycroft
17f933f6ce Add missing break that hosed multicast. 2000-02-28 06:44:52 +00:00
enami
d2b929f576 Fix naming think-o. 2000-02-28 05:30:19 +00:00
enami
8841a11f4d - Disestablish an interrupt if failed to enable the card. 
- If card isn't enabled, just set given information into softc.  Addresses
  PR#9457.
- Some cleanups and cosmetic changes.
 2000-02-27 23:10:51 +00:00
enami
71df610aeb Remove no longer necessary workaround for hpcmips. 2000-02-27 22:57:20 +00:00
augustss
10d9610df8 Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com> 2000-02-27 22:15:24 +00:00
augustss
7b4eccb432 Use DPRINTF for debug messages. 2000-02-27 21:06:55 +00:00