Tested by Tim Kelly.
Also patched from Tim to
- Delay longer for second CPU spinup.
- Only attempt to print CPU speed and cache configuration on certain
CPU types.
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
kernel will panic if an USB keyboard is plugged later.
Of course there will be a problem on a desktop machine with an USB attached
keyboard, but that cannot be fixed without access to such a machine..
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.
newer machines (iBook G4), it is in pseudo-hid (without typo), and there
are no `adb-kbd-ihandle or `usb-kbd-ihandles methods. In that situation,
just try to attach anything we can.
This patch fixes spurious inputs on iBook G4.
property of "/chosen" node in OF tree. On newer machines (e.g: iBook G4),
this property does not exist. We look for the node "mpic" as a second attempt
after a failure in /chosen.
This makes the iBook G4 keyboard almost usable (there are still some spurious
inputs on system startupi)
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
running XF4 servers. while this isn't the best solution, it is the only
one we have for the forseeable future, and there is long-standing precedent
in the i386 port.
PR #24830. The bad reuse of the register was actually triggered by using
no optimization at all.
pmap_subr.c is the only file that still requires at least -O to compile
into working code (the proper fix would be to write almost all of
pmap_zero_page() in assembly). The rest of a macppc kernel requires only
-finline now.
we start calling into C code. Previously we called memset() in our
C code. Unfortunately the compiler would sometimes store local variables
on the statck, which got killed by the memset(). Oops!
0x6?0000, load at 0xe00000. This gives us room for around 13 MB of
kernel, as opposed to the current 5 MB (0x600000 - 0x100000).
No changes to load-base or real-base are needed due to this change,
though machines that needed specific OFW settings before (OF 1.x
and 2.x) this change still need those settings.
Partially revert revision 1.25 -> 1.26 of ofwboot/Makefile & friends.
We do not need to distinguish between where ofwboot and ofwboot.{elf,xcf}
load; they are both fine loading somewhere other than load-base.
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
files for machines I know to have genuine PCI slots. As sent to tech-kern
for feedback in December 2003. Based on feedback, opencrypto is commented
out in the macppc GENERIC (due to absense of GENERIC_SOFTINT support),
and added to the sparc64 config (sys/arch/sparc64/conf/GENERIC32).
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
some iBook and PowerBook models.
this driver was written by Tsubai Masanari and further hacked on by
Jared D. McNeill to work on his iBook.
the driver is limited (master volume control only, and I haven't
tested recording) but has been functioning perfectly on my PowerBook
g4 DVI (ivory) for some time.
ok'd by matt.
APs to run at "full speed" where before they ran at just 1 or 2Mb/s.
The AP will adapt the data rate for each client based on packet
losses and the received signal strength.
I have also enabled rate adaptation for STA mode and for IBSS mode,
but the hardware gives us less control over the data rate in those
modes.
copyin() or copyout().
uvm_useracc() tells us whether the mapping permissions allow access to
the desired part of an address space, and many callers assume that
this is the same as knowing whether an attempt to access that part of
the address space will succeed. however, access to user space can
fail for reasons other than insufficient permission, most notably that
paging in any non-resident data can fail due to i/o errors. most of
the callers of uvm_useracc() make the above incorrect assumption. the
rest are all misguided optimizations, which optimize for the case
where an operation will fail. we'd rather optimize for operations
succeeding, in which case we should just attempt the access and handle
failures due to insufficient permissions the same way we handle i/o
errors. since there appear to be no good uses of uvm_useracc(), we'll
just remove it.
While we are here, try to tag machine dependent functions in header files.
also transformed darwin_ppc_*_state into mach_ppc_*_state, as this is
what they really are (COMPAT_DARWIN is on the top of COMPAT_MACH, not the
other way around)
Use <powerpc/oea/bat.h> exclusively and remove <machine/bat.h> and
<powerpc/bat.h>. Remove unneeded <machine/cpufunc.h>. To insure
1:1 correspondence of <powerpc/FOO.h> to <machine/FOO.h> include
"../../powerpc/include/Makefile" in "arch/FOO/include/Makefile".
Incororpate <byte_swap.h> into <bswap.h> and then byte_swap.h
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
"hotkey" abtn events into the function-key akbd events for the keys
that they're actually on (though the eject/f12 mapping is probably wrong for
the 12" PowerBook G4).
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.
internally, other than to set it when they gain their first address.
Every caller of mcstop() bar one was either preserving the state of IFF_UP
itself or was conditional on its already being clear, so the only effect of
this is to simplify the code and to change that one case, thereby curing
PR port-macppc/12088 (underflows on "mc" cause it to be taken down).
page: -1 for error, 0 for EOF, 1 otherwise. Inspired by an OpenBSD commit
message, pointed out by Miod Vallat in private mail.
vax/mba/hp.c: check return value <= 0, not < 0 to be concistent with how
other places handle return values from bounds_check_with_label().
could move to <arch/mac> if one day we create it.
Fixed french keymap: option was not mapped correctly, thus making
impossible to use |{}[] (tested).
Added jp keymap from PR/15438, and sf, sv, de and uk keymaps from OpenBSD.
(all untested).
as (G)uarded, protecting it from the processor being too aggressive in
reordering and prefetching. This allows OFB_ENABLE_CACHE to work on my
Powerbook G4.
Thanks to matt@ for suggesting this fix. "It's the right thing to do."
can't find root device. This is because the code blindly kills everything
after a comma in the boot path string, instead of being careful and doing
so only for the last component.
a pointer to current cpu's cpu_info structure. Use cpu_info for
intstk,intr_depth,still_stk,idle_pcb,curpcb,curlwp,etal even on
non-MULTIPROCESSOR machines. Add common macros GET_CPUINFO and
INIT_CPUINFO to get and initialize the cpu_info struct on startup. Make
ibm4xx use the standard <powerpc/frame.h>. Use IFRAME_xx in ibm4xx
trap_subr.S instead of explicit magic offsets. Move INTSTK and SPILLSTK
to std.<platform>. Change faultbuf to a struct instead of an array.
On MPC6XX cpus, stop using the vector page for temporary space and use
reserved space in cpu_info.
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
two ways:
- the child gets its pid as retval[0] (userland stub will turn it into a 0),
retval[1] is 1 and it is 0 in the parent.
- in the child, the fork syscall is successful, hence we must skip the next
instruction.
isochronous reception routine for IEEE 1394 OHCI (fwohci). The
transmission part is under construction.
The minimum configuration options for this feature are:
# IEEE 1394 (i.LINK)
fwohci* at pci? dev ? function ?
pseudo-device fwiso 1
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
before rev 1.4. This change makes OF 2.4 machines actually boot, and
it works fine on my OF 2.01 machine. No reports of failures on other
archs.
I expect this change is fine as the original code flushed the just-loaded
ofwboot out of the cache, conditionalized on FIRMWORKSBUGS. In rev.
1.4, the code got in-lined, and changed to actually flush low memory
out of the cache. Since machines kept booting, I expect the firmware
was really flushing the binary out of the cache, so we're fine.
rely on default value. It should actually be extracted
from the bootpath instead, but that involves translating
from apple partition map entries to netbsd disklabel entries.
are related to using libsa's alloc(). Problems go away with this alloc().
The problem is that the libsa alloc() assumes we can grab memory off
the end of the program. That assumption doesn't work for us. It's
much better to use the alloc() we were using as it calls OF_claim()
to get memory.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
Move the trap/vector initialization for MPC6xx ports to mpc6xx_machdep.c
Also move softnet, install_extintr, mapiodev, kvtop. Add common BAT
initialization code.
Add user Altivec support.
Fix calls to OF_call_method in macppc/macppc/machdep.c.
Use ci_fpuproc in cpu_info instead of separate fpuproc.
Add separate syscall.c and defined __HAVE_SYSCALL_INTERN.
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.
Makoto Fujiwara <makoto@ki.nu> and Manuel Bouyer <bouyer@netbsd.org>.
Help from Allen Briggs, Jason Thorpe, and Matt Thomas.
We need to call cpu_cache_probe() early in boot (machdep.c).
Add 603 info for completeness, and use NBPG not PAGESIZE, as the
latter relies on uvm being setup (cpu_subr.c).
Let uvm_page_recolor() be called before uvm has been set up; just
note the page coloring value (uvm_page.c).
while here, correct labelsector/offset mismatch in writedisklabel,
when readdisklabel() have found the label at nonstandard location
(due to magic number search). a lot of other ports have the same problem.
disk label offset. use hardcoded "1" for now, i guess we need a new #define
in sys/disklabel_mbr.h. fixes ofwboot to boot kernel off from MBR-formatted
disk.
- setup a 32KB (+32byte) stack, instead of 4KB stack
- cache flush: use _start instead of 0x4000, and flush 2k instead of 1k
Features (by me):
- implement:
OF_write() (and grab "stdout" from "/chosen")
putstrn(s,n) using OF_write(); write string s of n bytes long
putstr(s); write fixed-sized string s
putc(c); write char c
- add some useful messages which output the status of loading the
stage 2 bootstrap (which is usually ofwboot)
This code now works on Bill's Beige G3!
briggs