568f862aeb
PR 2111: Do not update system clock until we can keep more accurate time.
1996-02-23 12:40:37 +00:00
738faf922f
Add ^^ and ^_ codes to default keyboard layout
1996-02-23 05:43:48 +00:00
946696f064
Add m68k/db_memrw.c
1996-02-22 23:35:07 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
89179744bd
Use unsigned variables to calibrate delay_factor.
1996-02-22 02:04:14 +00:00
5fd93a11ca
Clear interrupt before enabling in calibrate_delay() (from John P. Wittkoski)
1996-02-19 21:40:48 +00:00
8fe7b2bbb7
Be a bit more careful when setting up the timer for calibrating delay().
1996-02-19 05:20:54 +00:00
ab3f741911
Update to latest Atari driver, but with some local modifications.
1996-02-19 02:51:03 +00:00
2efbb04ae0
Make delay() match prototype.
1996-02-17 19:23:03 +00:00
f851e3e8b3
Move spl stuff from param.h to psl.h. Prototype delay() in param.h.
1996-02-17 14:50:40 +00:00
946dc72362
Get d_npartitions right.
1996-02-14 14:20:54 +00:00
ef9b75f679
HZ used to be in Makefile.mac68k... It is 60 on the mac, not 100.
1996-02-14 04:26:38 +00:00
9401e46ed0
Change readdisklabel to check block 0 of the disk for a Macintosh magic
...
number before attempting to load the Macintosh partition info. If the
first 32-bits of block 0 contain the BSD disklable magic number, treat
it as a NetBSD disklabel.
When loading the Macintosh partition map, check the first 32 partitions
for the root, usr, and swap partitions--instead of the first 8. Still
only allows 8 total partitions for NetBSD use.
1996-02-11 22:31:47 +00:00
d03a91c75f
KNF-ified by Scott Reynolds a long time ago.
1996-02-11 15:23:19 +00:00
4323ae0307
Remove via_inited, as it is unused.
1996-02-11 01:20:46 +00:00
6945798b81
Correct ROM vectors for the LC 475.
1996-02-11 01:20:37 +00:00
ffc19f58b0
Back out last change. Bad karma to initialize the VIA that early.
1996-02-11 01:20:23 +00:00
0ae8a51904
PETE was pretty useless; SPOT is my own machine, and will better
...
reflect the status of sbc driver configuration.
1996-02-11 00:17:13 +00:00
af4f29bcb3
Identical to GENERIC, but uses the `sbc' driver.
1996-02-10 23:42:31 +00:00
ed73ac3b48
New SCSI driver for Macintosh II family machines, implemented using
...
the MI 5380 driver. It has been verified to work on the IIx, IIsi,
and IIci only, but should work with any Macintosh 5380-based SCSI
controller.
- This driver is _not_ intended to be a general purpose replacement
for the `ncrscsi' driver. It is an alternative for those having
problems with that driver.
- Disconnect/reselect doesn't (yet) work, so don't expect SCSI tape
or magneto-optical disk drives to function properly.
1996-02-10 23:28:41 +00:00
01c43471b9
Make a message more verbose for folks who try to boot in 24-bit mode.
1996-02-10 23:12:46 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
3c8605f0f7
Add sbc driver.
1996-02-07 16:34:28 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
2a878c9a3a
Move debugging defines, etc. into mac68k5380.c and use them instead of
...
something similar but different. Make a few cosmetic changes.
1996-02-03 23:17:53 +00:00
3d8d566948
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:50:22 +00:00
6b6a46ed2f
Implement mac68k_register_via1_t1_irq(). Also, remove via_inited warning.
1996-02-03 22:50:19 +00:00
d13a039f24
New delay() implementation from Scott Reynolds (scottr@edsi.org).
...
Also some minor rearranging of the VIA initialization (init earlier).
1996-02-03 22:49:52 +00:00
20123d5253
O2 breaks on this port. Use -O until we can fix it.
1996-02-03 15:14:39 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
9d9a70a5a2
Fix #includes.
1996-02-02 18:05:36 +00:00
5336dade8e
Force the talley counters to be read when we get the interrupt. GCC was
...
nicely optimizing the reads out for us. Kudos for this one go to
Steven R. Weiss <srw@hvcn.org>.
1996-02-02 15:30:56 +00:00
cec913603e
Don't special-case conf.c.
1996-02-02 13:38:05 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
af9bcab2ce
Clean up and comment a bit.
1996-02-01 03:40:26 +00:00
cde62d494a
Fix for delay(usec) for small usec. From Scott Reynolds <scottr@edsi.org>.
1996-01-29 04:10:00 +00:00
229c36d3dd
Patch a few of the holes in the machine-dependent part of this driver.
...
Sync the m.i. part with the Atari.
1996-01-24 06:02:06 +00:00
1fd44da3df
Change an &= to an & -- the former stopped working for some reason
...
that I need to delve into when I have time.
1996-01-24 05:52:58 +00:00
af016e6224
Updates from Kelly Campbell <camk@ksu.ksu.edu> for some ROM addresses.
1996-01-15 12:29:48 +00:00
57219ebad3
Remove vnode_if.[ch] during a "make clean", per PR#536 from
...
Dan Carosone <danielce@ee.mu.oz.au>.
1996-01-14 21:06:47 +00:00
0d6552d914
Fix typo in last change.
1996-01-13 14:03:38 +00:00
46c929801f
Move splimp to 2 and spltty to 1.
1996-01-13 01:41:05 +00:00
2a61903be4
Patch to at least recognise FOCUS EtherLAN. From Erik Bertelson
...
<erik@sockdev.uni-c.dk>
1996-01-12 04:52:58 +00:00
46a202fc6a
Fixes from PR #1931 w/ minor mod in vm_machdep.c
1996-01-12 04:16:25 +00:00
39f642161a
Keep two states for pdma debugging. Turn debugging back on. Sigh.
1996-01-11 15:25:53 +00:00
631612b677
Move splzs to spl4 from splhigh. Really same difference...
1996-01-11 15:23:01 +00:00
2a9c1229ec
Add some more first guesses at some machines.
1996-01-09 15:26:53 +00:00
1b99515858
Add #defines for some more machines.
1996-01-09 15:26:02 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
f5269d0ff6
Fix from Paul Goyette for off-by-one error.
1996-01-06 15:56:12 +00:00
682c4ec08f
Bring in a few changes from Atari port.
...
Add support from Paul Goyette for keeping more than just the last 2
states when debugging.
1996-01-06 05:18:06 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
ce000f04ef
Remove deprecated cpu_setstack().
1995-12-21 05:01:32 +00:00
0a1c6c4827
The IIci also needs an sccClkConst of 115200 instead of 122400.
1995-12-18 14:38:02 +00:00
486bcce207
Remove printf() that I forgot about.
1995-12-13 14:30:29 +00:00
405ac4248f
Fix from Paul Goyette to disable linked commands on drives that
...
reject them for simple commands. Leo W. reports that this does
not work for some systems. It's better than what we have now,
though. From Paul Goyette <paul@pgoyette.bdt.com>.
1995-12-13 03:48:07 +00:00
4b2a9a582d
Update from Bill Studenmund <wrstuden@loki.stanford.edu> with some minor
...
cleanup from me. Now supports serial console.
1995-12-13 03:09:57 +00:00
37b09a913d
Double ring limits from Bill Studenmund <wrstuden@loki.stanford.edu>.
1995-12-13 03:08:12 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
99e494a984
Fix from Niklas Hallqvist / Chuck Cranor / Michael Hitch / OpenBSD to avoid
...
integer overflow in initial pmap setup. Triggerred by high values for
maxusers.
1995-12-03 13:52:50 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
93d836857c
RAMDISK stuff.
1995-11-21 05:06:28 +00:00
447b897889
Define DST and TIMEZONE
1995-11-21 05:05:51 +00:00
e5a588356f
Small RAMDISK kernel.
1995-11-21 05:02:02 +00:00
369e3de013
Get rid of obsolete time specs.
1995-11-21 05:00:34 +00:00
f9ba6adcd7
Add rd_root.c from sun3.
1995-11-21 04:53:20 +00:00
0d91c3ff0b
Back the sccClkConst off to 115200 for several classes of machines.
1995-11-21 04:00:43 +00:00
9afe66efa5
Add rd support at the same address as the Sun3.
1995-11-21 03:39:45 +00:00
83604dcbd6
Add call to doshutdownhooks() before we attempt to reboot.
1995-11-14 04:05:49 +00:00
5b38a18f42
include files.fpe instead of just fpu_emulate.c--to get the new fpe code.
1995-11-03 04:50:21 +00:00
3074f94137
Remove ser1 from init list.
1995-11-01 04:59:31 +00:00
9a1fb2674a
Fixup error/debugging message.
1995-11-01 04:59:03 +00:00
c587e77144
Remove bogus assignment.
1995-11-01 04:58:21 +00:00
819cd49aa7
Remove -fno-builtin
1995-11-01 04:53:34 +00:00
4d13774bbc
Rearrange a bit. bpfilters -> 16 and ae0/ae1 -> ae*.
1995-11-01 04:52:46 +00:00
680ada5add
port-mac/1707: mac68k mouse drag problems with Cmd+arrow keys
...
from Ken Nakata <kenn@remus.rutgers.edu>
1995-11-01 04:40:21 +00:00
8218c4005c
Pull in all but one of Leo's changes from the atari copy.
1995-10-31 15:32:35 +00:00
47c507f8fd
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_
...
sigreturn.
1995-10-15 03:01:57 +00:00
67e41c3280
Remove extra serial device--forgot to check this in earlier.
...
The serial device now handles both channels.
1995-10-12 17:39:45 +00:00
712a3f32c4
Nuke blkclr and use thereof.
1995-10-10 04:14:18 +00:00
2738554927
Get rid of libkern duplicates.
1995-10-10 03:49:04 +00:00
5e13eea9b1
sysarch -> sys_sysarch
1995-10-10 03:48:33 +00:00
fcb8923ffa
Remove extra reference to LIBKERN.
1995-10-10 03:47:59 +00:00
f5fae9d016
Port of Sun3/Sparc zs driver from wrstuden@loki.stanford.edu
...
(Bill Studenmund). Should be massaged into machine independence
for 1.2.
1995-10-09 12:42:16 +00:00
685b9057c2
Pick up changes from leo's latest version.
1995-10-08 17:25:19 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
5479e941d9
Add a second ppp. It makes the kernel a whole 8 bytes larger on disk.
1995-10-04 11:05:25 +00:00
8ede165771
ae0 -> ae* and add a couple of vnd devices.
1995-10-04 03:42:18 +00:00
6e435f9152
Include ether.h to get NETHER.
1995-10-04 03:38:27 +00:00
be8ef88444
Raise number of bpfs to 12 since CAP needs a minimum of 8.
1995-10-03 20:19:01 +00:00
1ddc4223b1
Add offset to mac68k_vidlog as suggested by chas@ohm.nrl.navy.mil.
1995-10-02 09:41:06 +00:00
633e32000c
Wrap call to arpintr() in NETHER to avoid unresolved external if no ether
...
devices are present. Suggested by Paul Goyette (paul@pgoyette.bdt.com ).
1995-10-02 09:38:38 +00:00
d510375b06
Change to allow nack_message() to take an argument and send
...
MSG_REJECT_MESSAGE instead of MSG_ABORT when we get an extended message.
This allows a DEC drive to work when it attempts to negotiate synch.
transfers on us.
1995-10-02 09:03:53 +00:00
0066d1a66f
Finally get this right... Final fix from Paul Goyette paul@pgoyette.bdt.com
1995-10-01 05:10:20 +00:00
9de2a25e73
Surround Debugger(); with #if DDB. Different fix than encl. for PR#1553.
1995-10-01 02:29:32 +00:00
c1138ce68a
Yet another error in the (next-to) last changes.
1995-09-30 21:34:54 +00:00
890baf19ea
Fix stupid error in one of my last changes here.
1995-09-30 19:42:34 +00:00
d73008fe8b
Always announce it when loading miniroot.
1995-09-28 04:17:24 +00:00
b1d771eeb5
Simplify nubus interrupt routines a bit.
1995-09-28 04:11:18 +00:00
a9f0a2f9c4
Fix PR 1514 from Walter Ruetten.
1995-09-28 03:15:54 +00:00
5a0bebbc54
Patch from Theo to finish clearing 040 kernel page tables.
1995-09-27 04:16:54 +00:00
232169396a
Bullet-proof a little.
...
Make some more pdma code conditional on USE_PDMA.
Handle transfers of size > MIN_PHYS.
1995-09-27 03:38:57 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
01be7f2b8c
Need sys/mount.h for fhandle_t.
1995-09-21 11:27:43 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
b895726b5c
MACCCLASSIC is Color classic. And it's more like an LC than hopeless.
1995-09-21 01:56:31 +00:00
de36f970fb
Fix a few oversights. From Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
1995-09-20 13:03:21 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
516ddf511f
Wrap only the message in ifdef DIAGNOSTIC.
1995-09-19 03:18:15 +00:00
909842fb1f
Correct jClkNoMem address for C650 from
...
nick@csua.berkeley.edu via Walter Ruetten.
1995-09-18 13:55:09 +00:00
e8dbcda856
Do not define MIN_PHYS here--it is m.d..
1995-09-18 13:52:43 +00:00
cb5010a4fe
Fix a spelling slight. Grab the faulting address if nofault in bus error.
1995-09-18 13:51:25 +00:00
927d165081
Optimize the via interrupt processing routines a tad. From
...
chas@ohm.nrl.navy.mil (Charles J. Williams).
1995-09-18 03:15:43 +00:00
cb4eb50b28
Change HwCfgFlags4 to something a bit more mnemonic.
1995-09-17 21:28:33 +00:00
1c8c505974
Fixes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to avoid panic()s when we read the PRAM values while ROM
vectors are missing.
1995-09-17 18:51:40 +00:00
b528dcf5c2
Fix from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to prevent his last changes from causing a panic if some
values are not filled in in the ROM vector table.
1995-09-17 18:50:17 +00:00
c4250f7102
Add rom vector for LCIII from Peter Kohler (kohler@ife.ee.ethz.ch)
...
via Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
1995-09-17 05:22:57 +00:00
a106882a85
Only use PIO instead of PDMA if DRIVER_NOINT.
1995-09-16 18:22:33 +00:00
ccaff4431c
Simplify doboot().
1995-09-16 15:35:05 +00:00
ea4e385abd
Map in the VIA space for the bloody Mac II ROMs that directly reference
...
a hardware address. Also map in the ROM space before we call doboot().
1995-09-16 15:33:54 +00:00
6ed4261a1b
Fix segment table reference bug (from Michael Hitch).
1995-09-16 15:09:28 +00:00
a8b0260a05
Sync. with atari ncr5380.c -- mainly whitespace changes.
1995-09-16 15:06:55 +00:00
214a1bac9f
Fixes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
to use ROM routines to read and write PRAM times, etc..
1995-09-16 12:35:53 +00:00
bee931c117
Set timezone to 0. The booter's GMT bias should be used, instead.
1995-09-16 12:33:06 +00:00
2e06f3f2bb
More changes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
for correct handling of timezones and PRAM <-> system time conversion.
1995-09-16 12:31:13 +00:00
4dc81200f5
Rename scsi_main_irq() to pdma_ready().
...
Missed a few ATNs in last patch. (pointed out by Leo).
Raise timeout from 100 to 1000. From Leo.
1995-09-16 11:45:18 +00:00
048e948791
As Leo pointed out, my last change was not safe. This one should be.
...
I added two new bitfields to ncr_softc. They flag which devices have
been selected, and which ones have failed to go to message out when
selected with ATN. If a target fails to go to message out the first
time it is selected, it goes into the latter bitfield. If it fails
thereafter, we treat it as we did before.
1995-09-15 01:52:18 +00:00
a0d6a95720
indentify.
...
Bring in a few changes from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de ).
Assume that PRAM time - GMT bias (set in the booter) is the current time
in UTC.
1995-09-14 23:44:12 +00:00
1b34b69c93
Gah... The Asante SCSI/ethernet box doesn't answer the ATN request
...
for a 'MESSAGE OUT' phase, so add support in scsi_select() for the
phase to be either 'MESSAGE OUT' or 'COMMAND'.
1995-09-14 02:54:05 +00:00
d8ab74fcf2
Honor new MACH_CLASSIIvx.
1995-09-14 02:49:11 +00:00
13c1f2d48b
Shuffle MACH_CLASSes around a tad and add IIvx as a seperate class because
...
it may have a different method for accessing the 'via2' functions.
1995-09-14 02:48:09 +00:00
9c61c22d66
Clean up message a tad.
1995-09-14 02:43:51 +00:00
18a11cecc7
Update a comment.
1995-09-12 22:52:08 +00:00
d8dc3d91c0
Update for Leo's changes.
1995-09-12 22:31:45 +00:00
1ae7af5b59
Updates from Leo's changes in the atari port.
1995-09-12 21:20:18 +00:00
639f90ef6e
Update from Leo's changes.
1995-09-12 21:05:58 +00:00
c91abc3e61
Remove infinite loop per Leo and Mycroft.
1995-09-05 11:21:34 +00:00
19a99aa395
Get softc as parameter in interrupt function, using new changes from
...
via.[ch]
1995-09-04 05:07:16 +00:00
129ca2cea9
Make VIA2 interrupts pass an argument in and let the scsi_register_*_intr
...
functions use that, too.
1995-09-04 05:05:58 +00:00
4f76655592
Fix a goof in the latest changes.
1995-09-04 05:05:11 +00:00
02883e7341
Remove an extra "talk" command--from Ken Nakata <kenn@remus.rutgers.edu>
1995-09-04 02:50:57 +00:00
86d6e121cd
Add support for Extended Apple Mouse Protocol from
...
Ken Nakata <kenn@remus.rutgers.edu>.
1995-09-03 20:59:53 +00:00
b394d7fc7d
Enable ADB interrupts unconditionally if not using setup_egret().
1995-09-03 20:47:21 +00:00
de4100b643
Clean up a bit.
1995-09-03 14:54:31 +00:00
761b3a8340
Clean up some.
1995-09-03 14:51:38 +00:00
30c554fc9d
Changes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
...
This forces the need for booter version 1.8.
1995-09-03 14:37:16 +00:00
745cb60f16
Note that this is now an obsolete driver.
1995-09-03 03:39:38 +00:00
e9a9533544
Make the new m.i. scsi driver the default.
1995-09-03 03:37:32 +00:00
166af00381
Make a local copy of the atari m.i. scsi driver sources for the time
...
being. Some people aren't supping arch/atari and this allows those
people to get the sources.
1995-09-03 03:36:35 +00:00
a7783604fd
Optimize this some. Still seems slower than it ought to be.
...
Register interrupt functions with via.c.
Clean up somewhat. Turn off DEBUG.
1995-09-02 19:29:42 +00:00
4ed102bbd4
Optimize accesses to VIA2 a bit.
...
Force SCSI driver to register interrupt functions and remove default
handlers.
Bring in a few changes from
Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>--more to come later.
Define VIA interrupt functions as returning void, not long.
1995-09-02 19:27:34 +00:00
42d7c233d5
Very minor cleanup.
1995-09-02 05:44:07 +00:00
9f203a792f
Weren't quite ready for the last change.
1995-09-02 05:41:12 +00:00
e60752e507
Rearrange a bit.
1995-09-02 05:35:59 +00:00
bee422d998
DTRT. This should be considered the base version of the file.
1995-09-02 03:19:37 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
b6fb219037
Process via2/rbv interrupts from low bit to high bit.
1995-09-01 04:10:11 +00:00
e46e8e7a57
A first pass at a scsi driver based on the Atari ncr5380{reg.h,.c} code.
1995-09-01 03:43:49 +00:00
d3930dd627
In child_return(), pass oticks of 0 to userret() instead of p->p_sticks to
...
avoid slighting the child of a timer tick if it gets one after starting.
Thanks go to cgd for noticing this.
1995-08-31 03:22:55 +00:00
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
ac0af4229f
Change VIA2:vPCR setting to allow scsi IRQ and DRQ.
1995-08-25 02:56:41 +00:00
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
0484bdaf59
Don't panic on NMI and only take notice if DDB.
1995-08-24 04:25:07 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
68b61ea1ad
Fix comments. .space 0x1000 was accidentally left commented so it
...
still is--just explicitly, now.
1995-08-16 13:18:24 +00:00
37004a19e4
Missing cast and semicolon in last.
1995-08-16 05:17:31 +00:00
665a6a78bc
Load the old MacOS ROMBase value back in before we jump to reset.
1995-08-16 04:48:34 +00:00
ae51ffca30
Always fail when probed--until this driver works.
1995-08-14 03:55:28 +00:00
64ea04b1d0
Be more vocal about interrupts that we don't expect.
...
Include ncrscsi.h and ncr96scsi.h.
1995-08-14 03:16:07 +00:00
7d55e1196e
Document spl()s a bit, order the splfoo()s in splX() order.
1995-08-13 01:52:16 +00:00
7a9cad50cd
Replace splnet() with splsoftnet(). Add splnet(). Make splimp() > spltty().
1995-08-13 00:23:56 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3b5979d56c
Remove cpu040 use from here. It should only be used at boot time.
...
Take out old method for determining load address for IIci/si.
Set all but IIsi/ci to use a clock initialization value of 115200 (not
the baud rate... ;-).
1995-08-06 04:39:56 +00:00
110cf98100
Get rid of int_video_{start,length} and wierd nubus mapping.
1995-08-04 03:21:46 +00:00
70065c2ed5
Nuke int_video_start in favor of consistent use of mac68k_vidlog.
...
Don't find the internal video more than once.
Probe for internal video before nubus instead of after.
1995-08-04 02:55:06 +00:00
fb5e0a34bb
Be consistent and use mac68k_vidlog instead of int_video_start.
1995-08-04 02:47:31 +00:00
b0a1bd6e17
Use panic() instead of printf();Debugger();
1995-08-02 11:53:02 +00:00
a76e2adfab
Get rid of reference to Debugger().
1995-08-02 11:50:43 +00:00
f60a2bbccf
Add kludge for LC video and change IIvx to assume 1MB of VRAM if we can't
...
figure out how much there really is.
1995-08-02 04:15:41 +00:00
fc8739097d
Fix signed/unsigned gaff in last.
...
Bring up-to-date with latest rash of changes to if_ed.c.
1995-07-30 21:39:17 +00:00
ff5fa674dd
Fix the internal video probe again.
1995-07-30 21:35:00 +00:00
80cd97e743
delay(7) instead of delay(20) seems sufficient
1995-07-30 21:30:57 +00:00
cf76e90671
Differentiate printf for illegal instruction/fpu traps in kernel mode.
1995-07-30 19:18:28 +00:00
139f62c079
Add support for Farallon from Brian Gaeke (brg@dgate.org).
1995-07-30 13:38:04 +00:00
cf0aca3cb4
Read the packet header count in bytes, not as a word--word reads return
...
invalid data on some cards (notably old Apple Ethernet NB and Farallon
cards at least).
1995-07-30 02:44:27 +00:00
a2f49ac930
Don't show up in "slot" 0xe.\n
1995-07-28 01:34:58 +00:00
58f294f29c
get rbv_nubus_intr working--at least on the IIsi.
1995-07-27 04:19:21 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
ff7dcdbfc5
Some debugging code added.
1995-07-23 21:54:47 +00:00
1c213ea5b6
Minor #def changes.
1995-07-23 21:51:47 +00:00
83d0f4f73d
Use get_mapping only if 030 and MMU enabled. Otherwise, fake it.
1995-07-19 16:39:03 +00:00
d9b318b2be
Add support for:
...
GENERIC
RB_ASKNAME
RB_MINIROOT
Also revved up the required version of the booter because we need the
booter fixes to get this functionality.
1995-07-18 04:10:13 +00:00
a5e4549306
Stop recursive jmp0panics.
1995-07-17 01:31:14 +00:00
8d0e9635a6
Get IIsi ethernet almost working. Still misses a number of interrupts.
1995-07-17 01:26:02 +00:00
c5fe9f62ff
Cleanup a bit.
1995-07-17 01:25:12 +00:00
c5724ea3a3
Some more bugs fixed and functionality corrected by:
...
"Paul R. Goyette" <paul@pgoyette.bdt.com>.
Implemeted the Set Scrolling Region, Set Tab Stop, and Clear All
Tab Stops functions.
1995-07-17 01:24:34 +00:00
a91a7f619b
GENERIC should have options GENERIC. Duh.
1995-07-17 01:21:29 +00:00
30c70a7c59
patch to handle cursor moves better. From Paul Goyette
...
(Paul@pgoyette.bdt.com )
1995-07-09 15:36:41 +00:00
fd69606246
Take out bogus message.
1995-07-08 12:39:12 +00:00
33cef0adfd
Clean up a lot. Run machdep.c through indent.
...
Remove a bunch of old debugging code and some dead code.
Put in some new comments. Need more.
1995-07-08 04:25:07 +00:00
3758e23b79
Add another routine for the grf display-specific drivers to return a physical
...
address.
1995-07-06 17:13:45 +00:00
e6992b3e60
Panic if we don't know how to relocate the video address.
1995-07-06 13:30:24 +00:00
84ee954356
Change NBSBASE to 0x90000000 and let it and NBSTOP be defined.
1995-07-06 13:25:30 +00:00
d1d1fbc094
Put in a cast to make compiler happy.
1995-07-06 04:17:15 +00:00
0ae9938e56
Fix (last?) bug in the IIvx kludge.
1995-07-06 03:44:46 +00:00
6503666839
If SYMTAB_SPACE is defined, set esym to be the same as end.
...
Fixup my IIvx kludge again.
1995-07-06 02:32:13 +00:00
f3274364d4
Fix a bug I introduced earlier.
1995-07-06 00:28:32 +00:00
e11c8dfd4c
Stupid programmer error in IIvx kludge.
1995-07-05 03:48:45 +00:00
38031d912a
First cut at a kludge for IIvx internal video.
1995-07-04 18:55:11 +00:00
6d08320888
Move SCSIBase from scsi.c.
1995-07-04 14:42:16 +00:00
2e4f1e0daa
Update a bit.
1995-07-04 14:38:49 +00:00
2510a4f689
A few nits.
1995-07-04 14:38:34 +00:00
1513342690
Add code to netintr to call pppintr
1995-07-04 12:14:32 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
f92d7eb51f
Clean up some types.
1995-07-04 03:34:09 +00:00
4d6ed092f1
Fixup a comment.
1995-07-04 03:30:11 +00:00
1040af3492
Add missing interface for getting a grfmode structure from kernel.
1995-07-02 05:26:27 +00:00
ed434b457d
Fix grfmap() as well as grfmmap().
1995-07-02 00:49:52 +00:00
932a8fc9af
Set and use new fboff element from grfmode structure.
1995-07-02 00:30:25 +00:00
af7f31e30a
Add a couple elements to the grfmode structure.
1995-07-02 00:29:03 +00:00
3401cca400
Fix buglet that was missed when converting nubus to non pa==va mapping.
1995-07-01 23:40:38 +00:00
303845a487
Remove this define--we're using the new dump type.
1995-07-01 18:47:51 +00:00
eec2d38c71
Take out ncr96scsi0.
1995-07-01 16:35:54 +00:00
36654b75d9
Use flags for scsi interrupts. clean up a small bit.
1995-07-01 16:35:16 +00:00
175a1e27f4
add needs-flag for the scsi chip interfaces.
1995-07-01 16:28:13 +00:00
12ab0410c7
Clean up a tad.
1995-06-30 05:25:41 +00:00
fcde92bcba
Fix straytrap(). Update a few values in the ROM table.
1995-06-30 05:25:01 +00:00
5fced13f51
Ooops.
1995-06-30 05:23:03 +00:00
705e6bd12b
Fix oversight.
1995-06-30 05:21:33 +00:00
briggs