matt
bd160eabec
these are obsolete now that vax uses sysinst.
2000-06-16 06:36:45 +00:00
matt
1e3f670589
This file now lives one level down in common.
2000-06-16 06:35:12 +00:00
matt
2aaf9eb5c7
now lives one level down in boot.
2000-06-16 06:33:22 +00:00
ragge
53cc7ebe6b
Standalone device driver for DEBNx (ni) ethernet controllers.
2000-06-15 19:53:23 +00:00
matt
3dfb96fa8f
Add local symlink so that machine & vax refer ../../include instead of the
...
system ones.
2000-06-11 23:30:35 +00:00
ragge
fdc27c43a1
Fix booting from BI-based disks.
2000-06-11 10:39:26 +00:00
ragge
1320a4106c
Adopt to latest mba/hp changes.
2000-06-04 20:04:21 +00:00
ragge
79e7f9966d
Adapt to mba changes. Fix assembler buf (EDIV uses 64-bit arg, not 32).
2000-06-04 19:58:17 +00:00
matt
a8a863d4ea
more cleanup. use __builtin_frame_address(0) instead of our funky
...
FRAMEOFFSET macro. define an interrupt call frame and use that directly
instead of some magic offsets. Make boot autoconf.o use the current
reality.
2000-06-04 19:30:14 +00:00
ragge
b2bc655ba8
Fake success when trying to use the strategy() routine on a network device.
...
This avoids clobbering errno and bad error messages.
2000-05-26 20:18:57 +00:00
ragge
e2148b38ab
Don't init the net info more than once.
2000-05-26 20:16:46 +00:00
ragge
b8b40eed22
Avoid hanging if boot fails on some machines.
2000-05-26 20:15:21 +00:00
matt
091b74891d
Modify the file list for kernel to supress errors/text for certain ones.
2000-05-25 19:36:20 +00:00
ragge
e256727fb2
Four more instructions makes it possible to boot old kernels also.
2000-05-24 19:53:11 +00:00
matt
62469cb55a
Allow for boot.vax and netbsd.vax when booting. this allows a multi
...
architecture CD to be made which includes VAX support.
2000-05-23 23:34:20 +00:00
matt
8c22116924
cpp can be so annoying. to appease it, can't -> cannot
2000-05-22 15:54:53 +00:00
matt
7a0c7ff6f9
get rid of a double /
2000-05-22 15:42:37 +00:00
matt
ff7c474e11
The double / in the path has been bothering me for awhile.
2000-05-22 15:33:13 +00:00
ragge
314caa6651
Standalone driver for the Digital Equipment Unibus Network Adapter (DEUNA).
...
This allows 11/750 owners to install from a single TU58 cassette.
(Are there still any 11/750 owners left out there? :-)
2000-05-21 20:17:43 +00:00
ragge
d901690b17
Remove forgotten debug printf.
2000-05-21 09:45:54 +00:00
ragge
0b560b2138
Set correct adapter addresses if none is given.
2000-05-21 09:45:34 +00:00
ragge
93753c91c0
11/750 fixes:
...
- Set the correct adapter address in RPB for Unibus devices.
- Repair the disk read routines for HP disks. ROM routines do not work
on HP disks, therefore use a small home-written routine.
2000-05-21 09:44:16 +00:00
ragge
f7b7cabc0b
On the 11/750, the stack will be placed by ROM in the code area.
...
Start with moving it to a safe place.
2000-05-21 08:13:20 +00:00
ragge
b3f6551d41
WARNS=1. Unify the ra and tmscp driver.
2000-05-20 13:36:11 +00:00
ragge
027ee49b0f
Adopt to the RPB changes. Complete change of how network devices are
...
handled. No more hacks to find bus addresses.
2000-05-20 13:35:07 +00:00
ragge
c5f56fab00
Change all devices to use the RPB info when autobooting, this allows for
...
booting from unsupported devices also. As a side effect; it fixes PR#9202.
2000-05-20 13:30:03 +00:00
ragge
a8a7bf342f
New arguments to the rom routines. Adapt srt0 to new world also.
2000-05-20 13:22:39 +00:00
ragge
9ff9efe46a
Rewriting of the VAX boot block. Differences:
...
- Use the RPB for passing boot device info up to kernel, instead of the
old BSD "hack" with an encoded longword (see sys/reboot.h for details)
- Instead of separate drivers for all devices, use the HW-provided ROM
routines as much as possible.
- Add filesystem support for CD9660 also (now when there is space).
- Make everything compile with WARNS=1.
The boot block is now <7K in size and have support for UFS, CD9660 and USTAR.
2000-05-20 13:21:29 +00:00
matt
9bf1dc1e62
fix comments.
2000-05-18 04:20:41 +00:00
ragge
6a36c27519
Get boot device CSR from RPB instead of trying to guess it.
2000-05-09 20:53:51 +00:00
ragge
c17aed4bdc
Console support for VXT 2000, VAX 4000/105 and VAX 4000/500.
...
From Michael Kukat.
2000-05-08 17:06:48 +00:00
matt
70d4422b8a
Dump NRCV to 8 from 5. Note that a 8K NFS reply takes 6 full size
...
Ethernet packets so the chances are that if the server was fast enough
this driver would continuously lose one of the fragments. Eventually
causing the kernel load to fail. Add 2 extra for random ARP or other
packets that might be picked up.
2000-04-28 00:08:51 +00:00
matt
d32950cb7e
Add cd9660 support to the secondary boot blocks.
2000-04-24 21:46:07 +00:00
ragge
c6a9a48f2e
Add 4000/90 to the countdown hack.
2000-04-24 14:45:30 +00:00
mhitch
62c210a97b
Fix bootblock countdown for 4000/VLC.
2000-04-24 07:03:27 +00:00
ragge
8b94e15772
Fix boot block countdown on 4000/60. Easy to add for other 4000 machines also.
2000-04-22 20:29:58 +00:00
ragge
8c7cf8f008
Add device switch entry for RL disks. Only uses rom to boot so far.
2000-04-22 16:52:23 +00:00
ragge
cab5a24c60
Recognize RL02 as boot device.
2000-04-22 16:50:44 +00:00
matt
414d3f059d
Compile -Os instead of -O2 (optimize for space).
2000-04-18 20:47:04 +00:00
ragge
d334fb3019
Handle NCR5394 SCSI as NCR5380. (Doesn't matter, it will use the ROM
...
routines anyway).
2000-04-18 20:25:13 +00:00
matt
5fa416e77a
This should have never been checked in. it's what this directory is supposed
...
to make. opps.
2000-04-16 15:59:02 +00:00
matt
92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
matt
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
matt
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
darrenr
162b0b1dab
__P(()) -> __P((void))
2000-03-16 23:21:05 +00:00
ragge
3c7a7bf0e0
Install the boot programs in /usr/mdec also. From Todd Whitesel.
2000-03-04 16:17:46 +00:00
matt
4e90241d42
More files that were changed.
2000-01-24 02:54:01 +00:00
ragge
362ef7b498
Use romread() routines if we are booted from SCSI disks.
1999-10-23 14:42:21 +00:00
ragge
08cf6bea89
Boot block code fixed to 1) understand SCSI disks and 2) read from a
...
ustar filesystem (used in installation).
1999-10-23 14:40:38 +00:00
ragge
895fe9eaf6
Add support for 4000/90. Also handle interrupts more intelligent.
...
XXX - countdown doesn't work on 4000/90.
1999-08-23 19:09:27 +00:00
ragge
7638e3fbe3
Add boot support for the VAX 3300/3400 LANCE chip.
1999-08-14 19:41:14 +00:00
ragge
3766555455
Reset the interface when loading is finished, to avoid spurious writing
...
to memory.
1999-08-07 18:30:36 +00:00
ragge
ae5dbfbe84
BI bus files has moved.
1999-08-07 11:19:04 +00:00
abs
2ceba51630
Work with obj dirs (It seems that ${.CURDIR}/... is your friend).
...
If I _had_ to pick an arch on which to learn how this stuff works, it probably
would not have been vax... unless of course I was experimenting with time
compressing drugs. If we have a 1.4.2, this is definitely a candidate.
1999-07-18 05:55:45 +00:00
ragge
996e5bf55a
Stop the network interface after kernel is loaded but before starting it.
...
Not doing this caused packets to be read into memory somewhere after the
kernel was started but before the device was probed, normally in the
system page table. This gave quite unpredictable results...
1999-06-30 18:38:03 +00:00
ragge
a406e5332c
Clean up the boot command selection a bit. Add a command "halt".
1999-06-30 18:33:33 +00:00
ragge
3b8e9ab16d
Support loading the kernel from ustarfs.
1999-06-30 18:30:42 +00:00
ragge
04620b62b5
Search for include files in new locations.
1999-06-30 18:19:26 +00:00
ragge
7a1f65022b
Remove more unused files.
1999-06-20 16:00:14 +00:00
ragge
dc65be6cf8
Remove old unused files.
1999-06-20 15:58:28 +00:00
ragge
92a492d5ea
Some 4000/200 fixes. From Michael Kukat.
1999-06-20 15:52:51 +00:00
ragge
f1fc4934a3
Use common routines to identify cpu type.
...
Set up a SCB to be able to handle clock interrupts in the boot program.
Now timer countdown should work on all types of vaxen.
1999-05-23 21:58:19 +00:00
drochner
fe310dd299
include <lib/libkern/libkern.h> for intoa()/inet_ntoa()
1999-05-07 16:19:27 +00:00
ragge
397795c32d
Machines using KA48 must have memory mapped in, and use the same
...
addresses for console as KA46. From Michael Kukat.
1999-04-14 16:19:03 +00:00
ragge
60d4b9c2bd
A bunch of small fixes to make boot work on most VAXen.
1999-04-01 20:40:07 +00:00
ragge
11f0bebf2b
#define was wrong. Some .c should be .s.
1999-03-27 09:33:30 +00:00
thorpej
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
thorpej
587eda7c3f
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:11:51 +00:00
ragge
9f6b94f820
Outdated files.
1999-03-13 15:14:29 +00:00
ragge
fb6b53bfe4
Basic KA48 (VAXstation 4000 VLC) support.
...
From Michael Kukat <michael@camaronet.de>
1999-03-09 12:57:57 +00:00
ragge
e1305e82d9
New boot program for vax. Appearance similar to the i386 boot blocks.
1999-03-06 16:36:04 +00:00
matt
3e6d4553d9
Make DHCP/BOOTP the default for VAX net booting
1998-11-11 15:49:02 +00:00
ragge
42ed21663a
Make boot recognize MSCP disks on VAX8200. From Sergey Svishchev.
1998-10-21 20:16:33 +00:00
matt
c4ece7cdcb
Commit out include of "../include/macros.h" since its bcopy conflict with
...
the one in "lib/libsa/stand.h".
1998-10-09 06:15:33 +00:00
matt
71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
matt
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
matt
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
matt
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
ragge
58831dae59
Bug fixes and improvements. By Roar Thronæs and myself.
1998-08-31 19:20:24 +00:00
ragge
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
ragge
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
ragge
a799083fba
Fix netboot support for 3100/m76 which uses diagmem for its lance buffers.
1998-07-26 09:01:23 +00:00
drochner
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
ragge
1aab7e8c23
Added boot program support for the SGEC Ethernet controller, present on
...
some VAX 4000 maachines. Written by Jay Maynard. (jmaynard@phoenix.net )
1998-07-01 10:52:10 +00:00
ragge
52defbf438
Use rom routines on MicroVAX II, so that the QDSS/QVSS display will
...
be used if present. Fix provided by Boris Gjenero.
1998-03-20 16:36:20 +00:00
ragge
51964fa1e8
Standalone routine for DEQNA, written by Roar Thronaes.
1998-03-11 22:13:55 +00:00
ragge
ad1f451760
Move the boot program higher up in memory; to allow loading of bigger kernels.
1998-02-28 12:10:13 +00:00
ragge
7b60c8ed11
Fix multivolume installation bug; PR#4454.
1997-11-10 22:14:16 +00:00
ragge
e603ff5aa3
Fix vers.c dependency; PR#4090.
1997-10-20 11:54:26 +00:00
ragge
038cd08cce
Make UBA adapter selection work on 8600 again.
1997-10-18 23:39:18 +00:00
thorpej
616e0b7e33
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:26:38 +00:00
ragge
9f009387fc
Must grok includes. Also; prettier compile-time printout.
1997-06-29 21:30:09 +00:00
ragge
4d45dc0466
Use correct console on KA65? machines. Bugfix when specifying adaptor
...
number. Show compile-time for boot. Prettier printout.
1997-06-08 17:49:15 +00:00
ragge
3611dda5d0
Add better boot support for VS3100/??.
1997-04-10 21:25:18 +00:00
ragge
608bad4ba2
Bugfixes to lance routines. Get memory size from rpb to pass to kernel.
...
Support some more CPU types in boot.
1997-03-22 12:47:27 +00:00
ragge
8fa1cdb04b
Add routines for network handling and standalone le driver.
...
To make this work nice, big changes to the boot unit handling
was also required. From now only DEC HW unit numbering are used
in boot, to easy match boot device in kernel.
1997-03-15 13:04:22 +00:00
ragge
9bf924ecc4
Be able to find out if we are booted from network.
1997-02-27 19:43:26 +00:00
ragge
40f0692085
s/tms/mt/
1997-02-12 18:00:42 +00:00
thorpej
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
ragge
fdcabd43da
Do not use any emulated insn's in boot program. (in this case cmpc3).
...
Add strncmp to get around this.
1996-08-02 16:18:39 +00:00