matt
d3558c0177
Increase kernel VA space for kernels that don't use direct mapped memory.
...
(512MB -> 1.25GB)
2015-05-31 22:15:52 +00:00
jmcneill
42e3a53701
disable __HAVE_MM_MD_DIRECT_MAPPED_PHYS again, still some stability issues
2015-05-31 20:04:44 +00:00
jmcneill
9be3b3689d
enable MULTIPROCESSOR
2015-05-31 14:43:59 +00:00
skrll
9014cc8d38
No need to cpu_dcache_wbinv_all now that a9_mpsubr.S invalidates L1 only
...
as it should
2015-05-31 08:13:18 +00:00
jmcneill
58a741c99b
enable __HAVE_MM_MD_DIRECT_MAPPED_PHYS and PMAP_NEED_ALLOC_POOLPAGE
2015-05-31 00:41:53 +00:00
matt
3c80ab26d6
Use the first1g for kernel memory, not the 2nd one.
2015-05-30 23:17:37 +00:00
jmcneill
7e86eeda9b
attach gpiobutton to power button pin
2015-05-30 15:36:27 +00:00
jmcneill
abf8a55536
add HDAUDIOVERBOSE
2015-05-30 14:13:12 +00:00
jmcneill
6e40faebf1
enable hdaudio
2015-05-30 13:47:17 +00:00
jmcneill
d33dbb1618
Tegra K1 Watchdog support.
2015-05-30 13:25:55 +00:00
jmcneill
a34b0ce127
Replace ath with athn, and attach gpiorfkill to GPIO X7
2015-05-29 23:18:30 +00:00
matt
8826022743
Remove #define VERBOSE_INIT_ARM
2015-05-28 02:22:05 +00:00
jmcneill
6e40120187
MP not ready, disable it again
2015-05-27 09:40:51 +00:00
skrll
728b01dfee
Before spinning up the secondary cpus flush the dcache otherwise the
...
dcache invalidate in cortex_mpstart makes bad things happen.
I have no idea why.
RPI2 boots again
2015-05-21 20:50:57 +00:00
jmcneill
8987f28bba
re-enable multiprocessor support now that sdmmc has been fixed
2015-05-21 10:35:08 +00:00
jmcneill
ed3efacb13
Power-on Host1x subsystem
2015-05-18 20:36:42 +00:00
jmcneill
bfb965fe25
Work in progress HDMI / framebuffer support for Tegra K1.
2015-05-18 19:32:48 +00:00
jmcneill
3333c4c041
add ddc at iic3 (HDMI DDC)
2015-05-16 11:49:01 +00:00
jmcneill
5cdbd765d2
enable SATA, maybe it will inspire someone to fix it
2015-05-15 12:18:48 +00:00
jmcneill
27610eb34b
enable XUSB PADCTL
2015-05-15 11:49:58 +00:00
hsuenaga
18a97e755e
add synchronization barrier for AURORA_IO_CACHE_COHERENCY.
...
cleanup MARVELL L2 cache code.
2015-05-14 05:39:32 +00:00
jmcneill
8f1f86202d
add INSTALL kernel for JETSONTK1
2015-05-14 00:07:04 +00:00
jmcneill
0e46ac913f
5V/12V power to molex connector on Jetson TK1 is controlled by GPIO EE2
2015-05-14 00:02:00 +00:00
skrll
119978f543
Whitespace
2015-05-13 11:21:38 +00:00
skrll
37fba0f3a7
One comment is enough for anybody
2015-05-13 11:21:04 +00:00
jmcneill
9d47d126db
select max cpu frequency (~2.3GHz) at boot
2015-05-13 11:07:28 +00:00
jmcneill
685c034321
initialize cpufreq subsystem
2015-05-13 11:07:02 +00:00
jmcneill
0ea784f51b
add titemp
2015-05-12 20:54:30 +00:00
jmcneill
069a031648
copy bootargs from uboot before we turn on the MMU, for the benefit of kernels without __HAVE_MM_MD_DIRECT_MAPPED_PHYS
2015-05-12 10:37:20 +00:00
jmcneill
8300b51deb
add ath@pci (mini-PCIe expansion slot)
2015-05-11 21:46:50 +00:00
jmcneill
3bc45873a8
add tegrai2c (I2C[12345]) and seeprom on I2C1
2015-05-10 23:51:08 +00:00
jmcneill
23bcc13e35
half-attached sdhc breaks reset for some reason, so disable eMMC until we fix it
2015-05-10 13:24:11 +00:00
jmcneill
430e427719
Jetson TK1: USB1 VBUS power is controlled by GPIO N4
2015-05-09 18:57:30 +00:00
jmcneill
036acc4d2c
for Jetson TK1, GPIO N5 controls vbus vdd for USB2
2015-05-09 12:08:30 +00:00
jmcneill
2486eb6552
enable tegrampio
2015-05-07 23:55:31 +00:00
mrg
4499df58a1
bump CHILD_MAX and OPEN_MAX defaults on several platforms, both to 1024.
2015-05-07 19:14:55 +00:00
hkenken
275055545e
use armv7_generic_space
2015-05-07 04:13:47 +00:00
jmcneill
8827e7890a
Tegra K1 RTC driver.
2015-05-05 00:25:44 +00:00
jmcneill
10be22f9da
Remove __HAVE_MM_MD_DIRECT_MAPPED_PHYS and re-enable 2GB support, fixed
...
by arm32_kvminit.c r1.33
2015-05-04 00:59:29 +00:00
jmcneill
5e96a9e7b1
disable MULTIPROCESSOR for now
2015-05-03 18:49:28 +00:00
jmcneill
ec484ab4fe
UART clock source is PLLP. Set com type to COM_TYPE_TEGRA.
2015-05-03 17:24:45 +00:00
hsuenaga
4e3bd6105a
add new ethernet driver mvxpe for recent MARVELL's SoC after ARMADA/XP.
...
this driver supports 'counter mode', and is disabled by default.
ARMADA SoC family has new ethernet controller acceleration mode called
'enhanced mode' or 'counter mode.' it seems that backward compatibility mode
used by if_mvgbe is still working, but the specification of the old mode
is completely disappeared from SoC's reference manual.
I tested the driver using MIRABOX(ARMADA/370).
2015-05-03 14:38:09 +00:00
jmcneill
e1b20f2837
Add Tegra K1 PCIE support.
2015-05-03 01:07:44 +00:00
jmcneill
581102ab39
jetsontk1 specific gpio setup for sdhc
2015-05-02 17:15:20 +00:00
jmcneill
834fa49e7b
enable tegragpio
2015-05-02 12:09:34 +00:00
skrll
990b408b90
Disable non-boot CPUs on RPI2 - there are still issues with interrupt
...
handling.
2015-05-01 09:59:11 +00:00
hkenken
85ce02e169
remove DIAGNOSTIC
2015-05-01 07:22:42 +00:00
martin
2ea02f975a
Add options COPY_SYMTAB to make module loading (and /dev/ksyms) work again.
2015-04-29 19:05:51 +00:00
jmcneill
8bcb30da14
Add a basic driver for the Clock and Reset controller, use it to determine
...
CPU frequency.
2015-04-28 11:15:55 +00:00
jmcneill
82e3865891
disable sata and hda until we learn how to power them up
2015-04-27 09:56:36 +00:00
