13d8353ffc
Add Linksys USB100H1, an Ethernet and HomePNA adapter.
2000-05-06 18:28:01 +00:00
d0d92c23d0
Use USBD_NORMAL_COMPLETION in the previous.
2000-05-03 18:21:36 +00:00
ffe599486c
When emulating UHF_PORT_POWER for the internal hub, make sure to initialize
...
the status return value.
2000-05-03 18:14:49 +00:00
23bcab075a
Don't request sense after INQUIRY. From FreeBSD & OpenBSD.
2000-04-28 21:34:05 +00:00
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
91878e8679
Reorder some #defines.
2000-04-27 15:25:36 +00:00
df70862e8c
Insert (very conservative!) bus_space_barrier() calls at all register accesses.
...
The bus_space(9) man page says you've gotta have them...
2000-04-25 14:28:13 +00:00
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
4d0217d2c1
Remove item.
2000-04-23 23:21:32 +00:00
007a7dbfd8
Update with new files.
2000-04-23 23:19:36 +00:00
0e5c7f55af
Regen.
2000-04-23 19:35:35 +00:00
23f3c0074f
Sync with FreeBSD: add two more adapters.
2000-04-23 19:03:45 +00:00
b12ed6c03b
Make it possible to move a device to its unconfigured state by
...
using config #0 .
2000-04-23 00:46:59 +00:00
bc5e86601e
Add an item.
2000-04-22 22:52:15 +00:00
3a27942ba8
Add a clarifying comment.
2000-04-22 22:50:44 +00:00
84f24d3c29
The D-link serial adapter lies about being self powered. It's obviously
...
bus powered. How can we do power budgeting when the devices lie?
2000-04-21 21:02:44 +00:00
60bb0d050d
Add some comments.
2000-04-21 20:58:56 +00:00
46fb8de93a
Use a 255 ms interrupt interval even if the descriptor in the hub asks
...
for something else, because the spec says that it should be 255.
2000-04-21 19:51:43 +00:00
4379f92630
Make sure to read the full hub descriptor (including the deprecated field).
2000-04-21 18:57:40 +00:00
3d9d091685
Change the exact sequence of commands when a hub is attached to follow
...
Windoze more closely. This makes more devices work.
After two years of doing USB work I've finally access to a USB protocol
analyzer. Which means I should be able to mimic what Windoze does in
certain cases instead of just following the specs. Following the specs
is not enough since the devices often don't.
2000-04-21 16:05:50 +00:00
878deae672
Add a define for some slack port power up time.
2000-04-21 16:01:31 +00:00
9fb474fcf0
Regen.
2000-04-21 15:59:43 +00:00
f791a72b9c
Change error reporting in port reset function.
2000-04-21 15:58:55 +00:00
3f08804668
Pretend we know how to turn on port power (it's always on).
2000-04-21 15:40:01 +00:00
fdeba432d2
Add a comment about a non-obvious use of a #define.
2000-04-21 15:38:55 +00:00
d744db2ea9
Add D-link serial adapter (made by someone else :).
2000-04-21 15:37:50 +00:00
e1950d4ffa
regen.
2000-04-20 23:40:27 +00:00
3e4e60beeb
Add Zip 250.
2000-04-20 23:39:50 +00:00
173c535a95
Add one, remove some.
2000-04-19 16:17:45 +00:00
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
6d6ad52fd4
Regen.
2000-04-15 15:57:59 +00:00
f6b73a654c
Add another camera.
2000-04-15 15:57:27 +00:00
b6ef06e018
Add a file I forgot.
2000-04-14 18:15:47 +00:00
2ed37fcf5d
Add driver for FTDI FT8U100AX serial adapter.
...
XXX This is still experimental and needs more work.
2000-04-14 14:51:22 +00:00
219f3c9ccf
More debug.
2000-04-14 14:41:35 +00:00
1767c08cba
Add a capability for pre/post processing on write/read.
2000-04-14 14:21:55 +00:00
3149043619
Add a driver for the Rio 500 MP3 player.
...
XXX This driver might go away again, since you can do it all with ugen.
XXX But this driver is compatible with the Linux driver so there are
XXX programs for it.
2000-04-14 14:20:02 +00:00
0839e2a0d9
Regen.
2000-04-14 14:15:41 +00:00
471d06cfbc
Rename FUTURE to FTDI.
...
Add the funky little D-Link radio.
2000-04-14 14:14:48 +00:00
017ca78459
Make attach of ugen work as it should so product&vendor locators can be used.
2000-04-14 14:13:56 +00:00
e44f0f1147
Support for SIGIO.
2000-04-14 14:12:47 +00:00
eaaf682603
Fix a typo in a comment.
2000-04-14 14:12:11 +00:00
e1f94170e5
Generate a diagnistic dump on "Host Controller Halted".
2000-04-14 14:11:36 +00:00
ecb5f2e56a
revisit in6_ifattach().
...
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
2000-04-12 10:36:38 +00:00
40b25953db
Add driver for Prolific PL2301/PL2302 host-to-host adapter.
2000-04-09 18:23:23 +00:00
8fb6cb9b81
Remove usused field.
2000-04-08 20:54:38 +00:00
2d88a5d886
Regen.
2000-04-08 20:35:13 +00:00
e75e18b138
Add another ISD IDE adapter.
2000-04-08 20:14:00 +00:00
d65678850d
fix build of ucom. (static/non-static)
2000-04-08 01:22:26 +00:00
ef57f37442
Regen.
2000-04-07 19:00:17 +00:00
4ca1044eb8
Add Prolific host-host adapter.
...
I'll write a driver in a few days.
2000-04-07 18:59:58 +00:00
3b05a69aa2
Remove a couple of Static that shouldn't be there.
2000-04-07 12:40:16 +00:00
9355847b78
Fix typos in comments.
2000-04-06 23:44:20 +00:00
af0c0d535a
Fix a bug in HID Pop handling. From UCHIYAMA Yasushi.
2000-04-06 22:58:32 +00:00
7859835446
Add another #if NATAPIBUS > 0 in case there is no atapibus attached.
2000-04-06 13:52:04 +00:00
cf248f12dd
Add some, remove some.
2000-04-06 13:33:47 +00:00
a302716de4
Let the parent device of a ucom decide what size the read and write
...
buffers should be since it knows about the speed.
Increase the buffer size of uvisor.
XXX The uvisor is still pitifully slow. There must be a problem somewhere.
2000-04-06 13:32:28 +00:00
1acb380bf7
Make it compile without USB_DEBUG. From Chris Jones.
2000-04-05 21:24:11 +00:00
1b535c32fc
Make this driver actually work.
...
(Noone did any testing for me, so I had to buy a Handspring Visor myself.)
2000-04-05 11:12:48 +00:00
8b5373dd2e
Use reference counting on the softc so detach doesn't blow it away prematurely.
2000-04-05 11:11:33 +00:00
36b5d25ca8
Make protocol message more accurate.
2000-04-04 20:16:47 +00:00
a94b555441
Put a ratecheck on error messages from the interrupt pipe.
2000-04-04 20:16:19 +00:00
358b947b7b
Correct a typo.
2000-04-03 13:40:05 +00:00
d063047593
Enable QIC157 command set. Untested.
2000-04-03 12:31:34 +00:00
dc3ce0b35e
Enable UFI protocol. Still untested in NetBSD. Used by, e.g., Y-E Data
...
floppies.
2000-04-03 12:12:38 +00:00
b9d50c36a7
Regen.
2000-04-03 12:10:04 +00:00
e0b4887adf
Add more vendors and devices. From FreeBSD and Nick Hibma.
2000-04-03 12:09:43 +00:00
6442efb498
Make this file compiles under some condition:
...
- #if 0'ed out the umass_reset for now.
- some atapibus specific code is conditionalized by NATAPIBUS.
2000-04-03 03:56:49 +00:00
e126f0d1b3
New and shiny version of the umass driver. This is a port of the new
...
FreeBSD umass driver by Nick Hibma <n_hibma@freebsd.org> and
MAEKAWA Masahide <bishop@rr.iij4u.or.jp>.
Improvements:
uses asynchronous USB requests
supports more transport protocols (Bulk-only and CBI)
supports more command sets (SCSI and ATAPI)
Tested with Zip100 and Imation Superdisk.
2000-04-02 23:46:53 +00:00
60057aca5c
Allow atapibus to be attached to umass.
2000-04-02 23:40:41 +00:00
0a425e1f3d
Generate an error message if starting a transfer fails.
2000-04-02 21:25:41 +00:00
7311856f29
Add a delay before reading the number of ports from the controller to
...
avoid getting 0 from it.
2000-04-01 09:27:35 +00:00
ca4c16d936
Note that the Handspring Visor is a Palmpilot compatible PDA.
2000-03-31 13:08:01 +00:00
d3908431bb
Turn on UVISOR_DEBUG with USB_DEBUG.
2000-03-30 17:04:47 +00:00
e8f6613abe
Add driver for the Handspring Visor.
...
This code probably doesn't work, because it has not been tested.
Despite several pleas for testing there doesn't seem to be any Visor owners
out there. Perhaps it will get tested if it's in -current?
Anyway, the code can at least serve as a template for how to make a USB driver
that shows up as a tty.
2000-03-30 16:56:19 +00:00
2c3137dc38
Add forgotten OpenBSD fix.
2000-03-30 16:38:55 +00:00
4fe9287221
Two more OpenBSD fixes.
2000-03-30 08:53:30 +00:00
dd7160dcba
Afew more OpenBSD portability fixes.
2000-03-30 00:18:17 +00:00
1b57fb1495
Remove some unused prototypes.
2000-03-29 18:55:36 +00:00
96806cb7ea
Fix a buglet.
2000-03-29 18:30:46 +00:00
a25e27e1eb
Some OpenBSD portability fixes.
2000-03-29 18:24:52 +00:00
365daa37be
Remove redundant decl of cold - it's in <sys/kernel.h>.
2000-03-29 03:59:43 +00:00
023c506a5e
Take off an item.
2000-03-29 02:17:42 +00:00
61db1b8e46
*SIGH* Revert back to the old method of aborting xfers.
...
I had tested the new stuff for two months now, but as soon as I commited
it the problems started to appear. Murphy, no doubt...
2000-03-29 01:49:13 +00:00
9a386a047a
Do not use all xfers at the same time, this can cause problems in the HC
...
drivers.
2000-03-29 01:47:25 +00:00
7e7ceecd2b
A first stab at support for isochronous transfers.
2000-03-29 01:46:26 +00:00
5e754a177b
Do not accept new xfers for queuing while a pipe is aborting.
2000-03-29 01:45:20 +00:00
f606c26834
Be more defensive in a DIAGNOSTIC test.
2000-03-28 17:07:04 +00:00
37e4821c88
The list is growing...
2000-03-28 10:54:35 +00:00
c2f90d0d43
Correct a debug message.
2000-03-28 10:53:59 +00:00
9609f4caa2
Add a comment.
2000-03-28 09:48:25 +00:00
3316da3988
Another patch for xfer abort...
...
XXX The current xfer queueing and aborting semantics should really
XXX be changed. It cannot be implemented in a sane way on UHCI.
XXX One day when I have lots of time I'll redesign it...
2000-03-28 09:47:10 +00:00
28a87e2fdb
Use default timeout for transfers.
2000-03-27 22:44:01 +00:00
568b4d8190
Be a little more careful when aborting.
...
Preallocate some TDs for large buffers.
2000-03-27 22:42:57 +00:00
8456fa4709
Add a flag for umass debugging.
2000-03-27 22:40:48 +00:00
fc72e72d7d
Change (almost) all static to Static. The symbol `Static' can then be defined
...
to `' or `static' depending on if you want to debug or not.
2000-03-27 12:33:53 +00:00
2341e5679e
Don't mess with QH in bulk abort for the moment.
2000-03-27 09:41:36 +00:00
8e7f7d2d69
Keep free block statistics.
2000-03-27 08:27:03 +00:00
9e5b3b729c
Remove some debug nonsense.
2000-03-27 08:01:09 +00:00
9ffe849791
Make it compile without DIAGNOSTIC.
2000-03-27 07:39:48 +00:00
augustss