Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
68,621 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

8339 Commits

Author SHA1 Message Date
jeffs aaa5c58d70 Update arc map routine prototype to compile again. 2000-08-08 02:11:05 +00:00
drochner 78fa2d7e41 fix interrupt priority botch 2000-08-07 17:34:41 +00:00
billc aac52686f0 Manually edit the headers to show which version of pcidevs this was 
generated from.

XXX - this really should be automated
 2000-08-07 08:27:11 +00:00
billc 7ba2890ab8 Added PCI IDs for 3Com's Home Connect (3c450) and Office Connect (3cSOHO100). 
They both are register compat with later versions of the 3c905 (tornado/
vortex) series.
 2000-08-07 04:08:35 +00:00
briggs b103a8ca48 Label the buffer size as such on probe. 128 KB makes sense, but 4608 does not. 2000-08-06 00:19:04 +00:00
ad 8d37a29277 Regen. 2000-08-04 14:32:05 +00:00
ad fc2908cf8a Vortex Computer Systems changes, from OpenBSD: 
- Add product ID for GDT6518RS.
- Fix bogus product IDs.
 2000-08-04 14:31:40 +00:00
augustss daff45a51a Regen. 2000-08-04 11:57:59 +00:00
augustss c54b0fde7a Add ATEN serial adapter. 2000-08-04 11:57:34 +00:00
tsutsui ef86d29308 Add one more delay() to sip_read_eeprom(). 2000-08-04 09:30:56 +00:00
bouyer 8464bde7e8 If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of 
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
 2000-08-03 23:14:31 +00:00
nathanw fb20241fda When performing pci_config_dump: 
- Display the full value of 64-bit BARs.
 - Avoid displaying the upper 32 bits of 64-bit BARs as a separate 32-bit BAR.
 2000-08-03 19:58:55 +00:00
bouyer 1b00421876 Add quirk entry for NEDICOM CRD-BP2, from kern/10738. 2000-08-03 12:36:08 +00:00
bouyer a8421d4787 Some W83781 have ID 0x11 instead of 0x10; handle these too. 
Restore printing sdata for each sensors if DEBUG.
 2000-08-03 09:27:01 +00:00
castor b6dd28b4ce Support some differences in the Macronix 98715AEC-C and E chips from the other 
98715* series.

The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.

Also, start integrating fixes where media changes on an adapter
under load may fail.  There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
 2000-08-03 03:07:30 +00:00
mjacob cb4d63d57c More compilation breakage in the non-DEBUG case 
(from Castor Fu <castor@geocast.com>)
 2000-08-03 03:00:04 +00:00
jeffs e97c2066ab Add options DDB_BREAK_CHAR. This overrides break on the serial console 
break character with the supplied one.  This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled.  For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened.  Only supported in the com driver currently.
 2000-08-03 00:30:47 +00:00
bouyer de378db998 W83781D: Explicitely reselect bank0 before using "value RAM" registers. 
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
 2000-08-02 22:20:41 +00:00
bouyer e445e43ddc Add support for the W83697HF - basically a W83627HF with only 2 temp sensors. 2000-08-02 21:50:37 +00:00
bouyer 46c3f0204d PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with 
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
    PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
 2000-08-02 21:49:09 +00:00
bouyer bd0766459c Add support for the CMD PCI646U. Linux claims that this driver is brocken 
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
 2000-08-02 20:23:45 +00:00
mjacob 1ae072f471 Fix bonehead bug for compiles w/o DEBUG set 
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
 2000-08-02 17:39:50 +00:00
mjacob 068c76fc80 Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some 
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
 2000-08-01 23:55:09 +00:00
bouyer 76c77aca38 Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646. 
Note: there's also a PCI0646U, for which I don't have docs for now.
 2000-08-01 21:02:55 +00:00
briggs 02e3c1ef40 Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2. 2000-07-31 22:48:49 +00:00
gmcgarry f21a75dee3 XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE 2000-07-31 21:49:47 +00:00
ad 067f5e9814 Previous would have misbehaved if polled commands overlapped. 2000-07-31 13:16:34 +00:00
enami 35913a898c Sync internal state and ifmedia state. Addresses PR#10424. 2000-07-31 03:25:11 +00:00
briggs 3628f3e00c Make sure that we do not call bus_space_*_multi_* with zero count. 2000-07-31 02:14:47 +00:00
bouyer 100a4a6b22 Add support for the W83781D and W83782D hardware monitors. 2000-07-30 22:23:53 +00:00
briggs e6dde2bd42 Add MII support to smc91cxx driver. This is supported for the 91c100 
and 91c100FD (FEAST) controllers.  Existing controllers should continue
to work as they have.  Added the card's memory to the probe message.
 2000-07-30 21:34:47 +00:00
bouyer 538126d75a swap lm_match() and wb_match(), as wb_match() is more restrictive. 
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
 2000-07-30 17:22:26 +00:00
takemura b5e3ec56a8 Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.) 2000-07-30 04:41:15 +00:00
jhawk d569dc2fb5 Whitespace fix (space rather than tab after #ifdef) 2000-07-29 17:49:08 +00:00
jlam cbd3022e31 Make this compile without PUCCN defined. 2000-07-29 17:43:38 +00:00
castor b2bf026f39 Guard the console code in puc.c with the defopt PUCCN so we can 
use the puc driver without having the com drivers.
 2000-07-28 20:43:45 +00:00
drochner 457d8d7c7e print parent device name too, so we know which socket a card was probed at 
and whether pcmcia or cardbus
 2000-07-28 19:17:02 +00:00
thorpej 081f57c846 Handle booting without a serial expander box connected. 2000-07-28 06:10:54 +00:00
martin 10debdeb9c Fix to autonegotiation problem with some fxp cards. Fix found and reported 
by Erich T. Enke et al. on current-users. This fixes PR 10550.
 2000-07-27 22:14:48 +00:00
bouyer e955a714ba Add support for the W83627HF: lm7x like, but with more sensors, and more 
registers.
 2000-07-27 21:49:22 +00:00
bouyer ca5b9b0c22 Force 64bit arithmetic for timeout computation; a 32bit int opverflows for 
large timeouts. Should fix PR kern/10575.
 2000-07-27 21:28:17 +00:00
bouyer a7d2293ea4 My 16 port boca seems to fail to update the interrupt bit in it's interrupt 
register for a port under high load. The effect is that the port is wedged
waiting for an interrupt that will never come.
Add a callout-based watchdog which periodically (hz/10) scan trough the ports
for missed interrupts.
Problem also noted by Chris Jones, and this fix also helped him.
 2000-07-27 20:08:47 +00:00
bouyer 0154cbce36 Ops, forgot this one: Add interrupt disable bit #define for HPT370 2000-07-27 15:26:16 +00:00
bouyer aa0d4a41d5 HPT370: clear disable interrupt bit; make it works in Ultra/66 mode. 2000-07-27 14:28:45 +00:00
ragge acb96154d0 More intelligent BI vector assignment. 2000-07-26 12:41:40 +00:00
pk 34604a9f79 No point in forcing SECDAY to be a long int. 2000-07-26 11:07:45 +00:00
onoe 188122248a I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works 
with WEP enabled.
 2000-07-26 07:28:56 +00:00
onoe cc8e6675e2 add Samsung MagicLAN SWL-2000N 2000-07-26 07:24:15 +00:00
jeffs fa8ff381d8 Add code to allow the PCI com serial ports to be used as the system 
console.  This is not enabled by default, and is turned on with
options PUCCN.  Done by castor@netbsd.org.
 2000-07-25 23:18:42 +00:00
pk 969b4bc568 Define the todr(9) interface. 2000-07-25 22:38:14 +00:00