lfs_writeseg (possibly after they had been freed).
If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the
caller's file and line to _malloc and _free.
on mount, through the newer checkpoint and on through any newer
partial-segments that may have been written but not checkpointed because
of an intervening crash.
LFS_DO_ROLLFORWARD is not defined by default.
Kernel:
* Add runtime quantity lfs_ravail, the number of disk-blocks reserved
for writing. Writes to the filesystem first reserve a maximum amount
of blocks before their write is allowed to proceed; after the blocks
are allocated the reserved total is reduced by a corresponding amount.
If the lfs_reserve function cannot immediately reserve the requested
number of blocks, the inode is unlocked, and the thread sleeps until
the cleaner has made enough space available for the blocks to be
reserved. In this way large files can be written to the filesystem
(or, smaller files can be written to a nearly-full but thoroughly
clean filesystem) and the cleaner can still function properly.
* Remove explicit switching on dlfs_minfreeseg from the kernel code; it
is now merely a fs-creation parameter used to compute dlfs_avail and
dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its
former role is better assumed by a properly computed dlfs_avail.
* Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv.
This prevents a panic, but, if the cleaner is feeding the filesystem
the wrong data, you are still in a world of hurt.
* Cleanup: remove explicit references of DEV_BSIZE in favor of
btodb()/dbtob().
lfs_cleanerd:
* Make -n mean "send N segments' blocks through a single call to
lfs_markv". Previously it had meant "clean N segments though N calls
to lfs_markv, before looking again to see if more need to be cleaned".
The new behavior gives better packing of direct data on disk with as
little metadata as possible, largely alleviating the problem that the
cleaner can consume more disk through inefficient use of metadata than
it frees by moving dirty data away from clean "holes" to produce
entirely clean segments.
* Make -b mean "read as many segments as necessary to write N segments
of dirty data back to disk", rather than its former meaning of "read
as many segments as necessary to free N segments worth of space". The
new meaning, combined with the new -n behavior described above,
further aids in cleaning storage efficiency as entire segments can be
written at once, using as few blocks as possible for segment summaries
and inode blocks.
* Make the cleaner take note of segments which could not be cleaned due
to error, and not attempt to clean them until they are entirely free
of dirty blocks. This prevents the case in which a cleanerd running
with -n 1 and without -b (formerly the default) would spin trying
repeatedly to clean a corrupt segment, while the remaining space
filled and deadlocked the filesystem.
* Update the lfs_cleanerd manual page to describe all the options,
including the changes mentioned here (in particular, the -b and -n
flags were previously undocumented).
fsck_lfs:
* Check, and optionally fix, lfs_avail (to an exact figure) and
lfs_bfree (within a margin of error) in pass 5.
newfs_lfs:
* Reduce the default dlfs_minfreeseg to 1/20 of the total segments.
* Add a warning if the sgs disklabel field is 16 (the default for FFS'
cpg, but not usually desirable for LFS' sgs: 5--8 is a better range).
* Change the calculation of lfs_avail and lfs_bfree, corresponding to
the kernel changes mentioned above.
mount_lfs:
* Add -N and -b options to pass corresponding -n and -b options to
lfs_cleanerd.
* Default to calling lfs_cleanerd with "-b -n 4".
[All of these changes were largely tested in the 1.5 branch, with the
idea that they (along with previous un-pulled-up work) could be applied
to the branch while it was still in ALPHA2; however my test system has
experienced corruption on another filesystem (/dev/console has gone
missing :^), and, while I believe this unrelated to the LFS changes, I
cannot with good conscience request that the changes be pulled up.]
Make lfs_uinodes a signed quantity for debugging purposes, and set it to
zero as fs mount time.
Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED,
IN_CLEANING) in macros, and use those macros everywhere. Make
LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know
about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
Change the space computation to appear to change the size of the *disk*
rather than the *bytes used* when more segment summaries and inode
blocks are written. Try to estimate the amount of space that these will
take up when more files are written, so the disk size doesn't change too
much.
Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they
now fail entirely, rather than succeeding half-way and leaving the fs in
an inconsistent state.
Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old
lfs_truncate had difficulty truncating a large file to a non-zero size
(indirect blocks were not handled appropriately).
Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be
reclaimed immediately: this vnode would not be written to disk again
anyway if the removal succeeded, and if it failed, no directory
operation occurred.
ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
instead of keeping it always == 1. (The ifile version number is
increased on vfree.) May address PR #7213, but I haven't been able to
test thoroughly enough to say for sure.
references (locked for VOP_INACTIVE at the end of vrele) and it's okay.
Check the return value of lfs_vref where appropriate.
Fixes PR #s 10285 and 10352.
the head of the inode free list (on the superblock) always matches the
rest of the free list (in the ifile).
Protect lfs_fragextend with seglock, to prevent the segment byte count
fudging from making its way to disk.
Don't try to inactivate dirop vnodes that are still in the middle of
their dirop (may address PR#10285).
All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which
is removed as soon as the dirop is done (as opposed to VDIROP which stays
until the file is written). To address one issue raised in PR#9357.
1.4 branch.
* Use a separate per-fs lock, instead of ufs_hashlock, to protect the Inode
free list. This seems to prevent the "lockmgr: %d, not exclusive lock holder
%d, unlocking" message I was mis-attributing last night to an unlocked vnode
being passed to vrele.
* Change calling semantics of lfs_ifind, to give better error reporting:
If fed a struct buf, it can report the block number of the offending inode
block as well as the inode number.
* Back out rev 1.10 of lfs_subr.c, since the replacement code was slightly
uglier while being functionally identical.
* Make lfs_vunref use the same free list convention as vrele/vput, so that
vget does not remove vnodes from a hash list they are not on.
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
system crashed, inodes could be allocated that were not referenced. (Though
not a serious problem, it evidences itself in phase 4 of fsck_lfs.) Fix
this by marking if_daddr with UNASSIGNED before the inodes are actually
written; at mount time the ifile is checked for UNASSIGNED entries and
any that are found are linked back into the free list. (The latter
functionality should move into the roll-forward agent when it materializes.)
post-mortem of a production machine. Also, take the active dirop
count off of the fs and make it global (since it is measuring a global
resource) and tie the threshold value LFS_MAXDIROP to desiredvnodes.
filesystem. In particular,
- Fix mknod deadlock, described in PR 8172.
- Enable lfs_mountroot.
- Make lfs_writevnodes treat filesystems mounted on lfs device nodes properly,
by flushing that device rather than trying to add blocks to the device inode.
This, in combination with lfs boot blocks, will allow operation of an all-lfs
system.
a bug in fragment extension that could run the count negative. Also, don't
overcount for inodes, and don't count segment summaries. Thus, for empty
segments the live bytes count should now be exactly zero.
include:
- DIROP segregation is enabled, and greater care is taken
to make sure that a checkpoint completes. Fsck is not
needed to remount the filesystem.
- Several checks to make sure that the LFS subsystem does not
overuse various resources (memory, in particular).
- The cleaner routines, lfs_markv in particular, are completely
rewritten. A buffer overflow is removed. Greater care is taken
to ensure that inodes come from where lfs_cleanerd say they come
from (so we know nothing has changed since lfs_bmapv was called).
- Fragment allocation is fixed, so that writes beyond end-of-file
do the right thing.
architectures), truncate them intelligently instead.
The truncation is done centralized in vnode_pager.c.
This prevents from wrap-over effects when parts of large (>2^32 byte) files
are mmapped.
Don't allow to mmap above the numerical range of vm_offset_t.
This is considered a temporary solution until the vm system handles the
object sizes/offsets more cleanly.
- added an "union inode_ext" to struct inode, for the per-fs extentions.
For now only ext2fs uses it.
- i_din is now an union:
union {
struct dinode ffs_din; /* 128 bytes of the on-disk dinode. */
struct ext2fs_dinode e2fs_din; /* 128 bytes of the on-disk dinode. */
} i_din
Added a lot of #define i_ffs_* and i_e2fs_* to access the fields.
- Added two macros: FFS_ITIMES and EXT2FS_ITIMES. ITIMES calls the rigth
macro, depending on the time of the inode. ITIMES is used where necessary,
FFS_ITIMES and EXT2FS_ITIMES in other places.
perseant