Commit Graph

1477 Commits

Author SHA1 Message Date
matt b2db663942 fix entry for lemac on isa. add entry for wavelan on isa 1999-10-29 21:38:04 +00:00
drochner b4fc704a74 avoid cast 1999-10-25 19:39:54 +00:00
haya 4eee111127 This is the first check-in of CardBus driver. CardBus driver contains
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.

TODO:
  o Conform to the KNF more strictly.
  o Be unified with pcmcia code as much as possible.
  o Add more drivers for CardBus card, such as APA-1480 or USB card.

The affected files are listed below.

	sys/arch/i386/conf/files.i386
	sys/arch/macppc/conf/files.macppc
	sys/conf/files
	sys/dev/ic/elinkxl.c
	sys/dev/ic/elinkxlvar.h
	sys/dev/ic/i82365.c
	sys/dev/ic/i82365var.h
	sys/dev/isa/i82365_isasubr.c
	sys/dev/pci/files.pci
	sys/dev/pcmcia/pcmcia.c
	sys/dev/pcmcia/pcmciachip.h

The added files are listed below.

	sys/arch/i386/conf/CARDBUS
	sys/arch/i386/include/rbus_machdep.h
	sys/arch/i386/i386/rbus_machdep.c
	sys/arch/macppc/include/rbus_machdep.h
	sys/arch/macppc/macppc/rbus_machdep.c
	sys/dev/cardbus/if_ex_cardbus.c
	sys/dev/cardbus/Makefile.cardbusdevs
	sys/dev/cardbus/cardbus.c
	sys/dev/cardbus/cardbus_map.c
	sys/dev/cardbus/cardbusdevs
	sys/dev/cardbus/cardbusdevs.h
	sys/dev/cardbus/cardbusdevs_data.h
	sys/dev/cardbus/cardbusvar.h
	sys/dev/cardbus/cardslot.c
	sys/dev/cardbus/cardslotvar.h
	sys/dev/cardbus/devlist2h.awk
	sys/dev/cardbus/files.cardbus
	sys/dev/cardbus/if_fxp_cardbus.c
	sys/dev/cardbus/pccardcis.h
	sys/dev/cardbus/rbus.c
	sys/dev/cardbus/rbus.h
	sys/dev/pci/pccbb.c
	sys/dev/pci/pccbbreg.h
	sys/dev/pci/pccbbvar.h
1999-10-15 06:07:17 +00:00
mycroft 04a784cb79 Fix one more #ifdef, and now it actually compiles again. *sigh* 1999-10-10 00:14:44 +00:00
mycroft f52d37c204 Oops; this should get mpu.h, not midi.h. 1999-10-10 00:10:26 +00:00
mycroft 92ce7e96c6 NMIDI -> NMPU, to be consistent with sbdsp.c. 1999-10-10 00:08:24 +00:00
mycroft c5056ddd8c NMIDI -> NMPU, to be consistent with sbdsp.c. 1999-10-09 20:57:28 +00:00
mycroft 88a9173b10 NMIDI -> NMPU, to be consistent with sbdsp.c. 1999-10-09 20:54:36 +00:00
itohy 2b98e16426 Oops! Make it compile again. 1999-10-07 08:16:51 +00:00
itohy a44328a50e Fix power-related init code.
Change the default mixer setting to make wave and OPL3 volume even.
Mute the chip during attach not to make noise.
1999-10-07 03:28:56 +00:00
itohy 4aba617989 Add "opl at ym" and "mpu at ym" attachment.
Options for ym driver are defopt'ed.
1999-10-05 03:48:27 +00:00
itohy 871f1c2c0a New ym driver.
1. Add power control to reduce power consumption.
    The behavior can be controlled by mixerctl(1).
 2. Add suspend/resume hook to keep the parameters.
    Currently this includes CODEC and control registers but
    does not include the DMA state.  FIXME.
 3. Support "opl at ym" and "mpu at ym" attachment.
    Actually, this is required for power control.
 4. Add support for the on-chip 3D enhancement hardware.
    This includes bass/treble enhancement, wide stereo, and
    the equalization mode.  This can be controlled by mixerctl(1).
 5. Make "audioctl -w play.gain=xxx" work like as
    "mixerctl -w inputs.dac=xxx" and now it changes
    the wave output volume correctly.
 6. Support hardware master volume switches.
 7. Change formula of calculating gain so that all the levels
    should be used equally.
 8. Change "audioctl name" to "OPL3-SA3" and "audioctl version"
    to the version of the chip.
1999-10-05 03:46:08 +00:00
itohy d82343a7ec Add power control hooks.
Make the wave output mute while playback is inactive.  This significantly
reduces noises while preparing playback, especially by mpg123.
1999-10-05 03:44:31 +00:00
itohy 3b2be55d69 Add power control hooks. 1999-10-05 03:42:53 +00:00
itohy 0fed0f8872 "mpu at ym" attachment glue for making use of
Roland MPU401 compatible MIDI port on Yamaha OPL3-SA3.
1999-10-05 03:41:05 +00:00
itohy 04c1bf41b9 "opl at ym" attachment glue for making use of
OPL3 FM synthesizer on Yamaha OPL3-SA3.
1999-10-05 03:40:21 +00:00
thorpej a3ef0b7a6d Fix compilation of ISA bha front-end. PR #8528, Takahiro Kambe. 1999-10-01 18:17:12 +00:00
thorpej 63b8530b4e Update for SCSPI changes. 1999-09-30 23:04:39 +00:00
is 4efecd1291 The nca.c probe routine falsely claims i82595tx chips to itself.
Move it to after the iy driver.
1999-09-09 09:54:08 +00:00
soren a4b7a96e0e Do not complain in sbfind() if another driver has mapped the registers. 1999-09-07 00:49:41 +00:00
rh ff962e992b Add mode 3 support for newer CS423X chips. Modify probe to correctly
distinguish between CS4236, CS4236B, and CS4237B.
1999-09-06 17:07:04 +00:00
thorpej 90b9deda72 When padding short packets on transmit, don't include the CRC length
in the computation.  kern/8194.
1999-08-25 22:41:42 +00:00
augustss 19570e813c Implement opl at wss. 1999-08-14 21:19:29 +00:00
drochner 7317aa4924 make it report the correct ISA port range 1999-08-14 14:32:12 +00:00
augustss 03c29debf5 Make this file compile again. 1999-08-05 11:25:47 +00:00
augustss 84d5e946e6 Use NMPU not NMIDI around call to mpu_intr. 1999-08-04 10:50:52 +00:00
augustss c1c87dde4a Add another file I forgot in my MPU changes. 1999-08-04 10:46:34 +00:00
augustss 42fb510148 Move the mpu device declaration to conf/files.
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
augustss cbf1f6f1b9 Move the MPU driver isa/ to ic/.
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
augustss 0c0dc211d4 Make an MPU attachment to ISA. Used for old Roland cards. Written
by me and gson@araneus.fi (Andreas Gustafsson).
1999-08-01 17:53:39 +00:00
augustss a6a09bcdd6 Add support for ES18[67][89]. From PR #7427 by AW9K-NNK@asahi-net.or.jp,
Nonaka Kimihiro.
1999-06-18 20:25:23 +00:00
dante 001471550c Move chip version check from advlib.c to adv_isa.c 1999-06-12 12:10:30 +00:00
dante 29c6046a31 Add adv_isa.c entry 1999-06-06 17:30:37 +00:00
dante 8c090be7cb Add support for the following AdvanSys SCSI ISA cards:
Connectivity Products:
   ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1)
   ABP5140 - Bus-Master ISA (16 CDB) (Footnote 1) (Footnote 2)
   ABP5142 - Bus-Master ISA with floppy (16 CDB) (Footnote 3)

Single Channel Products:
   ABP542 - Bus-Master ISA with floppy (240 CDB)

Footnotes:
  1. This board has been shipped by HP with the 4020i CD-R drive.
     The board has no BIOS so it cannot control a boot device, but
     it can control any secondary SCSI device.
  2. This board has been sold by SIIG as the i540 SpeedMaster.
  3. This board has been sold by SIIG as the i542 SpeedMaster.
1999-06-06 17:28:58 +00:00
nathanw 70e38aa504 Fix bug uncovered by audio.c fix: Since the monitor control on the ESS
is a muting control, not a level control, change the name to reflect that.

XXX The fact that the audio code depends on the string names of the
XXX mixer devices is bogus.
1999-05-30 00:22:59 +00:00
bouyer ba2e85e711 32 bits I/O ocasionally fails on some hardware, so the test succeed but
the kernel can get a 'protection fault trap' later. Enable the 32 bits I/O
test conditionally on a config flag, disabled by default (problem
reported by kurt.schreiner@uni-mainz.de).
1999-05-19 14:41:25 +00:00
thorpej f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
bad b7ae9f8e40 Convert some bogus panic()s into printf()s. 1999-04-30 15:29:24 +00:00
bad 8fb6c6124b From Onno van der Linden:
Reorganise the driver some what.
Rename tr_reset() to the more appropriate tr_stop().
Create a common tropic reset routine and use it in the frontends.
Move the code in tr_config() which is only used in the card attachment
routines into a new tr_attach() function.
Take adapter off the ring through tr_shutdown() in a shutdown hook.
This simplifies the bus-specific frontend.
1999-04-29 15:47:02 +00:00
jonathan 894ce34c9d Improved 509B-in-PnP mode detection (Christoph Badura, Jonathan Stone):
Verify EEPROM checksum, extract card rev-level, test capabilities
  word, then test high-order config bits to verify card is in PnP mode,
  and skip if so.
1999-04-28 01:20:01 +00:00
jonathan cc3feba3f5 Don't attach an 3bc509B as ep? at isa if the EEPROM is set to to PnP mode.
See PR# port-i386/7428
1999-04-20 22:07:37 +00:00
augustss 4084111fca Make copyrights conform. 1999-04-13 20:37:21 +00:00
bouyer 503de51fdd Fix probe code for IDE devices:
- Don't rely on ATA signature: some ide controllers seems to not transmit it
  properly (SIMIDE on arm32 machines). Instead, when we guess a drive is here
  after reset, just mark it as ATA and OLD is it's not ATAPI.
- at attach time, use IDENTIFY to eliminate ghost from the probe. If the
  drive had the old flag and IDENTIFY failed, issue a WDCC_RECAL command
  to detect a pre-ATA disk. If IDENTIFY succeded, remove the OLD flag,
  it's obviously not a pre-ATA disk.
- add a new controller flag, WDC_CAPABILITY_PREATA, used to shorcut parts
  of the probe (not necessary, but makes the probe/attach faster). This is
  only set by the ISA front-end, all other controllers supported can't have
  pre-ATA drives attached.
The mechanism used are more or less the same as before, they have just been
reordered. Should solve port-arm32/7324 (waiting for feedback).
1999-04-11 20:50:28 +00:00
bad 57ba75e2fc Correct a misleading comment copied over from the PCIC version of this file. 1999-04-08 16:14:29 +00:00
mycroft 2f91607aff Enable this is a non-entropy rnd source. 1999-03-30 21:02:41 +00:00
mycroft ca5dd9fee7 The AD1848/CS4231 attachment doesn't create DMA maps any more, so we have to
do it here.  This is preferrable anyway, since we're not actually doing DMA
through the AD/CS chip.
1999-03-30 16:40:47 +00:00
tron 777c326ff7 Make it possible to force 16 mode via "flags 4" in kernel configuration.
Patch supplied by Martin Husemann on "current-users", fixes PR kern/5673.
1999-03-28 12:51:49 +00:00
thorpej 34f3cd7ce9 Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
ourselves.
1999-03-25 23:20:22 +00:00
augustss 0ed038285c Remove leftover definition of AUDIO_DEBUG. 1999-03-24 20:59:21 +00:00
drochner 1c99e4196a Use BUS_SPACE_ALIGNED_POINTER() instead of ALIGNED_POINTER() where the pointer
in not just used to access memory but is bassed to bus_space_xxx_n()
methods. For debugging purposes, bus_space can have additional constraints
which will be properly met by BUS_SPACE_ALIGNED_POINTER().
1999-03-23 21:41:07 +00:00