cf1ca54803
Minor Tsunami-related changes.
1999-06-29 07:22:25 +00:00
6068f64d34
* If the cpu_model string contains some form of MHz , don't print
...
the rpb field also.
* Add dot_conv(), hex format conversion for long hex digit strings.
1999-06-29 07:21:30 +00:00
10f1f2d81f
Prototype dot_conv(), new routine in machdep.c that formats an alpha
...
long like this: e081.8000.8000.0004
1999-06-29 07:18:23 +00:00
724273c3c0
System support for ev6 (21264) systems.
1999-06-29 07:08:53 +00:00
b0947ec27d
Turn on EV6 bits: Tsunami and system type 6600.
1999-06-29 07:04:15 +00:00
3714f3754f
Turn on dec_6600_init, "DEC_6600".
1999-06-29 06:50:41 +00:00
0f707bdb06
Identify the various ev6 pass numbers.
...
Also print the raw pass number rpb value as, say, `21264-4', like SRM does.
1999-06-29 06:49:36 +00:00
7a27e79bff
Support for EV6 Tsunami core logic and system type 6600.
...
This covers most or all of the presently-available 21264 systems.
1999-06-29 06:46:46 +00:00
819a054df2
Poll for serial interrupts. Return to 3000us delay instead of 4000us in init.
1999-06-29 04:45:59 +00:00
3c6560a597
More ugly code to force early configuration of the sun4 on-board timer.
1999-06-28 22:40:15 +00:00
61f60a2fbe
Allow SFILES to be empty; from Julian Coleman.
1999-06-28 21:03:23 +00:00
bd0ac6506c
Prepare entry for `hme at sbus'; commented out until driver is finished.
1999-06-28 20:26:47 +00:00
4fe4dae943
Ignore (but still generate a console warning) unhandled user-generated traps.
1999-06-28 15:51:26 +00:00
6895a21734
Correct imbalance #if.
1999-06-28 15:35:04 +00:00
7c5f595062
mmu_pagein() prototype: change address argument to `vaddr_t'.
1999-06-28 14:44:57 +00:00
5814a13657
mmu_pagein: refuse kernel space addresses here.
1999-06-28 14:41:43 +00:00
1e7b5cf8ae
Wrong definition of SID for MicroVAX I, from Brian Chase.
1999-06-28 13:13:53 +00:00
427639cdce
- Call ip6intr if INET6 is defined.
...
- remove "need-flag" for mac68k esp driver, as it is not used in anywhere
and conflicts with IPsec ESP header.
This should be the only MD change in IPv6 support, except kernel config file.
Very sorry if you have any compilation problem with it (I believe it is okay).
If your favorite arch is not included in here, please add a
call to ip6intr() from softintr handle.
1999-06-28 08:20:40 +00:00
12b25faeaf
KNFify. Add LINK1 flag to turn off that address munging thing, for cases
...
where the tunnel endpoint is not the same as the remote GRE destination.
1999-06-28 07:52:38 +00:00
74d3c214ec
KAME/NetBSD 1.4 SNAP kit, dated 19990628.
...
NOTE: this branch (kame) is used just for refernce. this may not compile
due to multiple reasons.
1999-06-28 06:36:47 +00:00
79fe772f46
Include a bit more info about what's not happening with IOP.
1999-06-28 04:33:21 +00:00
598b09009b
Include resourcevar.h for p_limit/rlimit definition.
1999-06-28 04:21:15 +00:00
622f3d3db5
Regen.
1999-06-28 04:10:26 +00:00
f69aea19d2
Add some weirdo modem.
1999-06-28 04:09:53 +00:00
8b9b340040
remove display.h
1999-06-28 02:44:49 +00:00
0d8aecad83
Description of making bootable floppy disk for NetBSD/bebox.
1999-06-28 02:19:37 +00:00
71a4446b04
Unfortunately, several changes that are intermingled:
...
- Add initial IOP support. ADB doesn't work yet for me, but it's here so
that others will be encouraged to work on it. ADB_HW_IOP basically
is configured as a NOP so that serial consoles will continue to work.
- Roll via1_intr and via2_intr into the intr.c scheme--this also required
changing rtclock_intr to grovel the stack differently so that hardclock
gets the right arguments and softclock() doesn't get all reentrant.
- Make via1 interrupts parallel to via2 interrupts--handlers get a pass-
through pointer and we can register handlers. Register via1 interrupt
with intr_establish()--normally level 1, level 6 for A/UX scheme.
- Use intr_establish() to set real via2 interrupt handler instead of the
hacked function pointer.
- Reorganize adb-direct interrupts so that a function call is removed.
- Implement A/UX interrupts for all Quadras right now. We may need to
special case some Quadras, but Linux folks are reporting success on
several models.
- Fix intrnames to be accurate for the normal, PSC, and A/UX interrupt
configurations.
1999-06-28 01:56:55 +00:00
f9de07203c
Add some constants from Linux/mac68k to note SCC, floppy, and SCSI registers.
...
Add some code, inspired by Linux/mac68k, to shutdown all DMA on the PSC
at startup and to disable and clear all interrupts except the SCC.
1999-06-28 01:41:13 +00:00
d897c73dfc
correct tgets loop.
1999-06-28 01:35:11 +00:00
d32f22724c
Use loadfile.
...
KNF
b* -> mem*
1999-06-28 01:20:43 +00:00
a6ad37379e
Add elf2pef and mkbootimage.
1999-06-28 01:08:05 +00:00
70b8755876
Convert ELF image into PEF image.
...
some KNF
1999-06-28 01:03:55 +00:00
9b0b219ff6
Moved from /cvsroot/syssrc/sys/arch/bebox/stand/boot/pef.h,v
1999-06-28 00:56:31 +00:00
8ab4e1005a
Moved to /cvsroot/syssrc/sys/arch/bebox/stand/elf2pef/pef.h,v
1999-06-28 00:56:30 +00:00
e6fae19e1f
Moved from /cvsroot/syssrc/sys/arch/bebox/stand/boot/magic.h,v
1999-06-28 00:56:03 +00:00
52fc791782
Moved to /cvsroot/syssrc/sys/arch/bebox/stand/elf2pef/magic.h,v
1999-06-28 00:56:02 +00:00
f1be5c4181
Moved to /cvsroot/syssrc/sys/arch/bebox/stand/elf2pef/elf2pef.c,v
1999-06-28 00:51:11 +00:00
13ba815119
Moved from /cvsroot/syssrc/sys/arch/bebox/stand/boot/elf2pef.c,v
1999-06-28 00:51:10 +00:00
5b75eca570
mkbootimage makes bootable BeOS DR8 filesystem(a.k.a. obfs) image.
1999-06-28 00:35:22 +00:00
d6205b71c6
Undo some of my recent changes that were misguided.
1999-06-27 23:43:37 +00:00
dfa695b9a7
Add missing phy's
1999-06-27 22:35:56 +00:00
ce110dd283
Add missing phy's. Increase miniroot size
1999-06-27 22:35:43 +00:00
f4351f7b96
Don't even try to output to, scroll or clear the device if we are in graphics
...
mode. On this chip, we need to access some registers to set the text plane,
which messes up the graphics setup.
This should fix the grf3 problems reported by several people.
Michael Hitch and Joerg Lehners analyzed the problem and provided the fix.
1999-06-27 21:17:17 +00:00
4440b677e2
add vr* at pci?, sort
1999-06-27 15:58:18 +00:00
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
746543928c
regen
1999-06-27 15:15:00 +00:00
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
1330797741
Restore scroll registers after X server exits.
1999-06-27 14:14:30 +00:00
c88662958f
include sys/resourcevar.h to be compiled.
1999-06-27 14:13:14 +00:00
a7e4d3ac4d
Add the Sbus front-end for the HME driver.
1999-06-27 12:47:52 +00:00
ross