71cba524e4
add scripts for npfd
2017-01-05 14:39:09 +00:00
8ad774dbf7
Undo change to a comment made when I thought another change to the
...
script was needed ... the unnecessary script change was never committed,
but the comment that described it was... No functional change.
2016-11-19 01:14:58 +00:00
1675d6af19
The config file is not required to exist (unless specified via -d).
...
(reported by rhialto@falu.nl ) Don't fail to start if it doesn't.
Make sure the directory for the config file exists inside the chroot before
attempting to copy into it ("confdir" was calculated, but never used...)
While here, fix getopts usage (obviously only ever previously tested when
the -c arg was the first option...) and don't use test(1)'s -o operator
(especially not when one of the other args is an unknown string).
If -c is given (and we will chroot), require filename to be full path.
Misc minor style cleanups.
2016-11-18 23:10:05 +00:00
6b3de624e6
Handle variable expansion and comma/space separators in postconf.
...
From Timo Buhrmester:
https://mail-index.netbsd.org/tech-userlevel/2016/08/20/msg010301.html
2016-10-30 15:47:06 +00:00
90ff2f0a25
Adjust for new ifconfig address/mask output.
2016-10-19 21:27:10 +00:00
a5229b934a
Cause rc to abort if mounting any of the critical local filesystems fails
...
rather than just ignoring the error.
Don't bother attempting to clear the contents of /var/run if /var/run
does not exist.
In that case the mkdir of /var/run/lvm would have failed - correct that
by using mkdir -p (which as a side effect will ensure /var/run exists
and is available for later scripts to use if for some reason it did not exist.)
2016-07-23 01:38:35 +00:00
796a3ac327
Avoid unnecessary use of basename(1). From Jukka Salmi a long, long time
...
ago on a tech-kern far, far away.
2016-04-23 21:24:31 +00:00
d6c8225a0e
use kat, a version of cat that strips comments
2016-03-06 18:50:06 +00:00
2357a4fb46
Use the new -P option to work out which pidfile dhcpcd will use.
2016-01-07 22:03:00 +00:00
d0367588d0
Instead of waiting for a duration based in IPv6 DAD count sysctl,
...
wait for 15 seconds for tentative flags to clear allowing 5 seconds
for detached flags to clear as well from configured addresses.
This is now protocol independant and allows time for the interfaces to
work out if they have a carrier or not.
2016-01-07 11:51:07 +00:00
dd01c08e97
remove some stuff we don't have; rename rc command variable.
2015-12-23 04:38:00 +00:00
ff0756d560
Add ip6addrctl
2015-12-13 02:05:15 +00:00
0e5ab369bd
PR/49380: KAMADA Ken'ichi: ntpd_chrootdir does not work on NetBSD 7.0_BETA
...
Provide /etc/resolv.conf so that it can resolve names. This is needed because
of deferred name resolution.
XXX: pullup -7
2015-11-23 19:56:47 +00:00
8b04443cd8
Fix the problem of just having a valid interface name in dhcpcd_flags.
2015-10-16 18:06:22 +00:00
c95ec17135
Make mdnsd start before NETWORKING and require staticroute, mountcritlocal
...
and networking.
Fixes PR install/43313.
2015-10-15 16:47:28 +00:00
e3d8d886ce
Implement "status" command for postfix - makes tools like ansible
...
happier.
2015-07-23 17:12:16 +00:00
562a53e657
/usr/sbin/chown -> /sbin/chown
...
(not sure why these need explicit paths at all, but whatevs)
2015-07-03 18:36:54 +00:00
68974b6b61
Apply modified version of patch from Wolfgang Stukenbrock in PR bin/41766
...
This forcibly unmounts tmpfs file systems, so that swapctl doesn't run
out of swap itself, eventually trying to kill pid 1.
No objections since:
http://mail-index.netbsd.org/current-users/2015/03/16/msg026908.html
2015-04-20 18:01:46 +00:00
f02362348e
fix typo in previous; pass -y unconditionally to resize_ffs, not -p
2015-04-07 18:02:11 +00:00
906c0d847e
add KEYWORD: interactive, honour resize_root_flags and resize_root_postcmd rc vars
2015-04-06 22:40:09 +00:00
b68ba22239
Parse config file like ifconfig.if(5).
...
First word is always the module name, followed by options.
Load modules right after root filesystem is checked and before it
becomes writable.
2015-04-06 15:07:50 +00:00
94dff34741
Add resize_root boot operation. If resize_root=YES in rc.conf then
...
the system attempts to resize the root file system to fill it's
partition prior to mounting read-write. Useful for things like AMI
file system images. May eventually be used by arm images after
coming up with similar solution for increasing the parition size.
2015-03-30 10:58:37 +00:00
7ba4328bfa
Process /etc/modules.conf (if present) at startup, before securelevel is
...
raised, to allow module loading on ports without a module aware bootloader.
2015-03-21 19:10:43 +00:00
88c9fb0be8
Add rc script for /sbin/iscsid.
2015-02-21 23:13:00 +00:00
f1c95757e8
It doesn't make sense to start wpa_supplicant from an rc.d script without
...
the -B flag, so always prepend it to $rc_flags.
2015-01-22 19:50:21 +00:00
1690f8559d
new ntpd wants to be able to translate ntp into a port number after chroot,
...
so give it its own small copy of /etc/services in the chroot
2014-12-25 23:00:18 +00:00
bd08953ecc
Add new keytype, replace duplicated code with loop
2014-10-19 16:33:01 +00:00
bad357ce4f
fix syntax error
2014-10-14 20:49:47 +00:00
f68fe4cac7
Use checkyesnox to test rtsol as it has been removed including its
...
default configuration which we should not warn about.
2014-09-21 09:48:32 +00:00
f542fd2122
Don't try and install rc.d/rtsold
2014-09-11 18:01:22 +00:00
c6314d6139
Remove rtsol(8) and rtsold(8) as their functionality is in dhcpcd(8).
...
Remove rtsol(8) from rc.d/network.
Add -w seconds command to ifconfig to wait for N seconds for until DAD
has finished on all addresses.
Use ifconfig -w in rc.d/network instead of a forced sleep.
As discussed on tech-net@
2014-09-11 13:10:03 +00:00
7f6fa64667
'file system' for consistency with documentation (instead of 'filesystem').
2014-07-22 17:11:09 +00:00
652bd7d1b3
Create the dhcpd.leases file if it doesn't exist already, don't just
...
warn about it not being there.
Closes PR misc/48868
2014-07-17 07:17:03 +00:00
916085404d
Make named and the rest of BIND seed their RNG from /dev/urandom, not /dev/random. Better would be to rip the enormous gonkulating RNG machinery out of libisc entirely. Later.
2014-07-13 22:06:56 +00:00
46ee6da10e
create /etc/rndc.key on start if it doesn't already exist
2014-07-08 07:04:07 +00:00
a270487d77
Indent.
2014-04-29 09:58:18 +00:00
4f67388957
Refactor a little to remove huge indents.
2014-04-29 09:56:16 +00:00
0db0bb3da5
Split huge monolithic functions for readability.
2014-04-29 09:42:51 +00:00
cf10990721
Allow the extra command "reload" to dhcpcd's rc script, letting it reload
...
its configuration and rebind directly via the script.
LGTM roy@
2014-04-06 17:13:57 +00:00
8797028bc7
- make etc/rc.d/wpa_supplicant create directory /var/run/wpa_supplicant
...
on startup
- create share/examples/wpa_supplicant/wpa_supplicant.conf and make it
known in the relevant places. Improvements welcome, my point was
ctrl_interface and "you seriously want this"
2014-01-23 07:26:50 +00:00
8f0c389494
wait until our local address is available before configuring.
2013-09-12 19:52:50 +00:00
d87d6793f0
Add _rtadvd user and group.
...
Add a chroot dir for the _rtadvd user.
Drop privs to the user _rtadvd after acquiring our socket.
When rc.d/rtadvd starts or reloads, the rtadvd config file is copied
into the chroot before starting or reloading rtadvd itself.
Create a symlink from /var/run/rtadvd.dump to the chroot
Inital idea from OpenBSD patch rtadvd.c r1.36
2013-07-09 09:34:58 +00:00
e3bb11dade
Add a hack to fix the dhcpcd rc.d script to work with a single
...
interface specified in dhcpcd_flags in rc.conf(5).
Fixes PR bin/43490
2013-06-25 13:02:53 +00:00
aa3896734e
if ipsec_flags is given, treat it as an interface name and change @LOCAL_ADDR@
...
to the IP address for it. This makes dynamic addresses work during autoconf.
Also while here in restart, re-use start and stop instead of duplicating them.
2013-06-14 16:37:55 +00:00
8782935dec
try to sync lists of rc.d scripts
2013-05-16 07:37:05 +00:00
a33513dc62
don't attempt to create interfaces that exist and don't hide errors.
2013-04-20 18:24:18 +00:00
df473aee24
PR/47540: Felix Deichmann: DSA keys can only be 1024 bits.
2013-02-07 19:32:19 +00:00
b1d97a6429
Make custom "reload" target work. Before this fix it would have tried
...
to send a HUP signal to "wpa_supplicant" instead.
2013-02-01 13:29:33 +00:00
281a5e1fdb
Add ppp=YES variable. Currently pppd(8) starts automatically if ppp_peers
...
is not empty. Adding a ppp variable allows the default peer to be set,
and ppp set to NO so that dialing can happen with /etc/rc.d/ppp onestart.
Default set to YES so that old behaviour is preserved.
http://mail-index.netbsd.org/tech-userlevel/2012/08/21/msg006656.html
2013-01-13 18:47:57 +00:00
191ca062bf
add a sync to make it less likely to boot with /etc pointing to nothing after
...
a crash.
2012-12-31 23:21:27 +00:00
christos