Define two new status codes for management frames.
Define 802.11 durations of important frame sequences, as will be
needed for ADMtek ADM8211 driver and others.
by the application, all NetBSD interfaces are made visible, even
if some other feature-test macro (like _POSIX_C_SOURCE) is defined.
<sys/featuretest.h> defined _NETBSD_SOURCE if none of _ANSI_SOURCE,
_POSIX_C_SOURCE and _XOPEN_SOURCE is defined, so as to preserve
existing behaviour.
This has two major advantages:
+ Programs that require non-POSIX facilities but define _POSIX_C_SOURCE
can trivially be overruled by putting -D_NETBSD_SOURCE in their CFLAGS.
+ It makes most of the #ifs simpler, in that they're all now ORs of the
various macros, rather than having checks for (!defined(_ANSI_SOURCE) ||
!defined(_POSIX_C_SOURCE) || !defined(_XOPEN_SOURCE)) all over the place.
I've tried not to change the semantics of the headers in any case where
_NETBSD_SOURCE wasn't defined, but there were some places where the
current semantics were clearly mad, and retaining them was harder than
correcting them. In particular, I've mostly normalised things so that
_ANSI_SOURCE gets you the smallest set of stuff, then _POSIX_C_SOURCE,
_XOPEN_SOURCE and _NETBSD_SOURCE in that order.
Tested by building for vax, encouraged by thorpej, and uncontested in
tech-userlevel for a week.
saving bit is set in incoming frames from a station, and buffers the
outgoing frames for the station until they are polled for. This
requires support in the driver to set a bit in the TIM bitmap sent
during 802.11 beacons.
So far, support for power saving in Host AP mode is only available
for the PRISM2 chipset.
M_PROMISC. In ether_input(), flag packets comming from an interface in
promiscous mode which are not for us M_PROMISC instead of droping them.
Drop M_PROMISC packets which are not passed to vlan_input(). M_PROMISC
packets passed to vlan_input() will be looped back to ether_input()
the M_PROMISC flag will be handled appropriately.
Clear M_PROMISC before giving the packet to bridge, as bridge has its own
checks for local MAC addresses.
This also makes bridges on vlan working.
- initialise stp when the bridge is turned up, without this stp will keep
all interfaces disabled in a sequence like:
brconfig bridge0 add if0 add if1 stp if0 stp if1 up
- s/BRDGSPRI/BRDGSIFPRIO in brconfig.c:cmd_ifpriority()
add a command (ifpathcost) to change the stp path cost of the STP path cost of
an interface. Display the interface path cost with the others STP parameters.
This improves performance a lot on slow machines behind a cable modem.
Protect it with PPPOE_SERVER as a reminder that this will have to be changed
if we add PPPoE server code in the kernel one day.
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
<kml@patheticgeek.net>.
This patch does NOT add monitor mode support for the Lucent radios.
awi(4) was only modified for compatibility with the new mediaopt.
It does NOT support monitor mode.
Tested by Kevin, Daniel Carosone, and I.
compile-time by BRIDGE_IPF, and at runtime by brconfig with the {ipf,-ipf}
option on a per-bridge basis.
As a side-effect, add PFIL_HOOKS processing to if_bridge.
malloc types into a structure, a pointer to which is passed around,
instead of an int constant. Allow the limit to be adjusted when the
malloc type is defined, or with a function call, as suggested by
Jonathan Stone.
packet - there is nothing to abort.
In pppoe_abort_connect rearange state handling slightly to avoid calls
to the PPP LCP state machine get into an infinite recursion.
This should fix the symptoms of PR kern/19500, but does not touch the
real cause for the lossage described there.
matching instance rather than the last one. this restores the behaviour
in the multiple-match case to what it was when all the drivers only allowed
instance 0 (and in particular, makes autonegotiation of the on-board fxp
on my DK440LX board work again by default, which has two PHYs that both
advertise "auto"). as discussed on tech-net.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
Change the name for the size of driver private structure:
ic_bss_privlen -> ic_node_privlen
Add a hook to free node for the driver private structure, though there are
no consumer of the structure in the tree for now.
correctly. To avoid massive extra code in each driver, now if_iee80211subr.c
also handles non-standard old lucent adhoc-demo mode.
This also fixes PR 14227.
Change the name of structure ieee80211_bss to ieee80211_node, which is
used for management of stations in hostap mode, and peers in ibss mode.
Split off ic_opmode, ic_phytype from ic_flags.
Preparation to merge 'wi' driver into 80211subr.c.
bpf_mtap() gets called with not-well-initialized mbuf, so we need to go through
it without touching m->m_pkthdr.len and such. it's part of our bpf_mtap() API
(at least today).
* SIOCS80211CHANNEL, SIOCG80211CHANNEL -- set/get the 802.11 channel.
* SIOCS80211BSSID, SIOCG80211BSSID -- set desired/get current BSSID.
From David Young <dyoung@ojctech.com>.
1.
Paul Mackerras and the Australian National University have worked things
out, and as a result, Paul now owns copyright on all these files, with the
proper terms.
2.
and... we managed to contact "Eric Rosenquist" <eric@rosenquist.com> through
the help of people who found him: first one was nick.stott@cogeco.ca
This now has a better license. Two authors left to go.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
- aging ang clear inactivity stations
- DTIM field in beacon/probe response.
- ignore IFF_PROMISC for hostap mode, since 802.11 has 3 address fields,
so that promisc mode is not required for AP function.
remove a test that has been obsoleted by the authentication failure
counter - enter slow retry mode always, not only if we already transfered
data successfully (the test was designed to disable retries when the
initial authentication setting was not correct, the auth failure counter
does this job better).
we don't know anything about with a PADT packet.
Use with care, this is pretty dangerous and will kill all userland PPPoE
implementations. Therefore it is not enabled by default nor added as
a commented out option to GENERIC kernels.
But it is highly usefull if you have a fixed IP, an ISP that does not use
LCP echo requests for link monitoring and you want to recover quickly after
a crash or otherwise ungracefull disconnect.
type for the driver, which will be used for 802.11 drivers.
Also add 2 APIs to get a list of available DLTs and use one for them.
BIOCGDLTLIST (struct bpf_dltlist)
BIOCSDLT (u_int)
optimization made last year. should solve PR 17867 and 10195.
IP_HDRINCL behavior of raw ip socket is kept unchanged. we may want to
provide IP_HDRINCL variant that does not swap endian.
program opens /dev/tun# and tun# has not been SIOCIFCREATE'd already,
it will be SIOCIFCREATE'd automatically. FreeBSD's tun interfaces
behave in a somewhat similar fashion.
- length was one off in names and secrets.
- add win 98 kludge but we keep it disabled for now.
- setup the authorization bit early so that we don't end up doing ppp
negotiations without authorization.
itojun