Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
95,950 Commits 606 Branches 0 Tags 3.1 GiB
cdd30a00ba
Commit Graph

95950 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
tron
7b03e17cb9 Don't invoke the up- and down-script for link local IPv6 addresses. 2002-04-15 20:42:37 +00:00
martin
cd924e0a08 nit pick. 2002-04-15 18:08:22 +00:00
tron
c28d45defe Invoke "ip-up" and "ip-down" script with parameters exactly matching 
those used by pppd(8).
 2002-04-15 17:32:18 +00:00
thorpej
d533e315ee Fix a typo and an omission in last. 2002-04-15 17:27:39 +00:00
bjh21
1f1695ddff Build the keymap-generating programs as hostprogs, since they're only run 
on the host system and never installed.

Install the generated keymaps using <bsd.files.mk> rather than by hand, so
that all the UNPRIVED magic can work.
 2002-04-15 17:27:33 +00:00
bjh21
5178253d62 Only include opt_*.h #ifdef _KERNEL_OPT. 2002-04-15 17:05:13 +00:00
mycroft
aa878fabc4 For 78Q2120 revisions 3 and earlier, punt to ukphy, as our special media status 
routine does not work on those chips.
 2002-04-15 16:50:52 +00:00
christos
6d2cc5b8e6 - open for r+, then w+, then r. 
- fix fread and fwrite error checking.
 2002-04-15 16:47:03 +00:00
thorpej
bc6522fb34 Add bits for the XScale Auxillary Control Register. 2002-04-15 16:34:32 +00:00
onoe
a40f47b098 Add support to Symbol Wireless Networker CF card. 
The card is Type 1 CF card and it doesn't have firmware in.
So we need to download the firmware image into the card before
touching it.
XXX downloading code should be written in generic (bus independent),
    but I don't have enough information for now.
 2002-04-15 15:05:58 +00:00
mycroft
69bae7ce64 Add wm. 2002-04-15 15:00:18 +00:00
onoe
410544177a Generated from the firmware binaries for T3 series CF adapter. 
Obtained from Tim Gardner <timg@tpi.com> who developoed the Linux driver.
And approved by Brad Lefore <blefore@sj.symbol.com> to redistribute it
with BSD license.
 2002-04-15 14:58:51 +00:00
tsutsui
2168ee307b Remove (commented-out) pmsi entries. 2002-04-15 14:47:03 +00:00
mycroft
0a948745d1 Regen. 2002-04-15 14:44:30 +00:00
mycroft
9d7578b25c Use chip numbers for most of the new Adaptec IDs, not board numbers. 2002-04-15 14:43:42 +00:00
tsutsui
ac00a8493f Set KERNEL_SUFFIXES=ecoff 2002-04-15 14:41:39 +00:00
msaitoh
22868c18c1 ADD MISSING "TARGET_DEFAULT" BIT WHEN LITTLE ENDIAN 2002-04-15 13:24:54 +00:00
skrll
6024d2c603 Nuke pmsi 2002-04-15 12:52:28 +00:00
christos
3baa6002c6 PR/16361: J. Mallett: make(1)'s job.c does not properly initialise postCommands 2002-04-15 12:45:33 +00:00
joda
518cc55c27 Maxtor D040H2 also can't modesense 2002-04-15 12:40:28 +00:00
ad
e200da16d8 Regen. 2002-04-15 11:12:46 +00:00
ad
aad41f43b6 Add a bunch of Adaptec, Dell and HP products. From OpenBSD. 2002-04-15 11:12:25 +00:00
leo
6b640fdcec Fix PR-16305. Make the 'end' symbol local. 2002-04-15 09:29:56 +00:00
mhitch
77b771d03b Don't copy boot.amiga to ${DESTDIR}/ - it is now done by the install/update 
script, sysinst, or manually when the bootblock is installed.
 2002-04-15 08:38:55 +00:00
pooka
eaf1f18146 Bump to nb7 after fixing FreeBSD PR #12801 (again) in a way which hopefully 
doesn't have adverse side-effects.
 2002-04-15 08:37:04 +00:00
pooka
a68282c497 Fix FreeBSD PR #12801 in such a way that it doesn't create unfortunate 
side-effects, like the ones described in bin/15891 and bin/16210.

patch from Sven Verdoolaege (nvi maintainer)
 2002-04-15 08:31:42 +00:00
martin
ed5298eb2f Make the LEDs work. 
Green LED = we have a TEI assigned, yellow LED slow blinking = one B-channel
in use, yellow LED fast blinking = both B-channels in use.
 2002-04-15 08:11:00 +00:00
ad
4f7cf03e41 Add an RCS Id, and comment out the settings since they represent what the 
defaults are - per Andrew Brown's suggestion.
 2002-04-15 07:48:00 +00:00
simonb
50d6d2b7d6 Add pcn, pnaphy. 
Add algor, evbmips, sbmips devices.
Sort.
 2002-04-15 07:37:17 +00:00
simonb
2e3d50dbd3 Add algor and evbmips attachments. 2002-04-15 07:33:27 +00:00
martin
bc96c942e9 This card issues a constant stream of interrupts (from an internal timer). 
Make it do this only while /dev/isdn is open.
 2002-04-15 06:59:51 +00:00
gmcgarry
3238830b82 rtc is used on hp300 2002-04-15 06:08:19 +00:00
gmcgarry
acb682fad2 When searching for devices also skip those deleted by userconf. 
Problem reported by uwe.
 2002-04-15 05:30:12 +00:00
simonb
f938ee8df6 Fix a couple of tyops. 2002-04-15 04:13:25 +00:00
perry
1e77807ee4 Per discussion on tech-security and tech-userlevel, upgrade default 
passwd type to md5. Note that with the passwd.conf facility, one may
easily "downgrade" the default to type old if one wishes, and that
existing passwds continue to work as before -- this only changes the
default for new passwds.
 2002-04-15 03:06:46 +00:00
perry
9c429c8cc6 add default passwd.conf file 2002-04-15 03:01:31 +00:00
mhitch
8e02eb2322 /boot.amiga isn't needed in the base set as it gets copied when installing 
or upgrading bootblocks during the install or upgrade process.
 2002-04-15 02:50:30 +00:00
mhitch
2bbb904100 Need to install /boot.amiga when installing/upgrading the bootblocks. 2002-04-15 02:48:17 +00:00
briggs
0c4a264e40 Really nuke pmsi 2002-04-15 02:05:10 +00:00
lukem
17a225a0e2 convert to the new MDSET.*.suffixes / MDSET.*.post variables, 
and take advantage of MDSETDIR enabling a release target
 2002-04-15 01:55:07 +00:00
briggs
9d121c1c24 Nuke pmsi 2002-04-15 01:43:35 +00:00
lukem
0e901f7d9b Clean up which .o members are built for each of the "fake" libraries; 
.o files containing unused functions are still linked in (unlike a .a file)
Saves a bit of space by culling unused .c references.

(Required .o members determined by looking at the mapfile generated by
adding LDFLAGS+=-Wl,-Map,mapfile in dhcp/client/Makefile.)
 2002-04-14 23:44:25 +00:00
manu
33d1091e95 Removed the IRIX signal trampoline, which is useless now we use the signal 
trampoline provided by IRIX libc.
 2002-04-14 21:52:25 +00:00
manu
f8c12b3107 IRIX provide a signal trampoline in libc, we now use it. 
- the signal trampoline address is given to the kernel by a sigaction()
  fourth argument
- we introduce an irix_emuldata structure to keep track of the signal
  trampoline address
- we don't support per-sigaction signal trampolines, we only do per-process
- now that we use the IRIX libc signal trampoline, we do not have to handle
  the errno update from the signal trampoline
- it is possible that IRIX 5 signal delivery works too, since theses binaries
  will come with their own signal trampoline
 2002-04-14 21:50:49 +00:00
wiz
dd39c685f3 bsd.depall.mk doesn't exist anymore, use bsd.dep.mk instead. 2002-04-14 21:44:22 +00:00
thorpej
cff1953dae Fix typo in last (luckily, search/replace makes the same typo everywhere). 2002-04-14 21:32:24 +00:00
thorpej
302ea396c3 iq80310_do_pending -> iq80310_do_soft, to accurately describe what's 
actually going on there.
 2002-04-14 21:30:19 +00:00
gmcgarry
aae385ef40 Drop into ${.CURDIR}/../distrib/${MACHINE} and make release. 2002-04-14 20:50:20 +00:00
gmcgarry
ad0e3bf651 Create ${RELEASEDIR}/installation/misc before installing into it. 2002-04-14 20:48:16 +00:00
onoe
dd80e6d577 Some fixes for Symbol card. 
- The version string doesn't need to start with 'V'.
- Symbol firmware also support CREATE_IBSS.
- But it doesn't support ROAMING_MODE nor MICROWAVE_OVEN.
 2002-04-14 19:55:23 +00:00