cdd30a00ba
Add Symbios 53c875A product ID.
2002-04-18 20:35:39 +00:00
eb4e540b0e
add PCI/USB vendor ID for Kurusugawa Electronics, Inc.
...
PCI-ID: 0x6809, USB-ID: 0x0b7e.
2002-04-18 17:40:56 +00:00
95bc0b09e2
Remove opms(4) for bebox (superseded by pms(4)).
...
Approved by christos.
2002-04-18 15:44:20 +00:00
379eadc41a
Duh, 0 bits enable interrupts in the IPAC!
...
So to disable them all better use 0xff instead of 0x00 as mask. Noted
by Matthias Drochner.
Move some initialization unrelated to interrupts back to its place at
attach time.
2002-04-18 15:32:30 +00:00
49afc8d8b9
This file no longer used.
2002-04-18 13:41:35 +00:00
13ad4ddfa4
Remove duplicate lines.
2002-04-18 13:27:00 +00:00
dedd141239
Split opms@arm32 in opms@acorn32 and opms@shark.
2002-04-18 13:21:06 +00:00
5bcf16a588
-opms(i386)
2002-04-18 13:10:06 +00:00
ff434a1201
Handle unexpected interrupts better.
2002-04-18 12:19:05 +00:00
52cdca5f88
If SIOP_SYMLED is defined, drive the activity LED though GPIO pin 1.
2002-04-18 12:03:15 +00:00
7341a66098
Regen: add hooks to drive LED via GPIO.
2002-04-18 11:59:41 +00:00
172d73c2d5
Add hooks to drive the activity led via the GPIO pin 1, as required by some
...
tekram and symbios adapters.
2002-04-18 11:56:11 +00:00
86920876dd
(force commit: no changes in the code)
...
WI_RID_SCAN_APS in previous commit works for Intel Pro/Wirelss 2011
with firmware 2.51.1.
It seems that the firmware automatically updated after the card runs on
Windows 2000 with 2011_2011B_CD_3.0 in Intel web site.
2002-04-18 05:24:28 +00:00
2f34976283
Regen.
2002-04-18 03:49:17 +00:00
544654cbc3
nother device.
2002-04-18 03:48:53 +00:00
6b14001ff6
Really use a JUMP for NOP, not a block move.
2002-04-17 21:39:14 +00:00
32b8af4ca2
Be carefull not to cause interrupts while /dev/isdn is not open.
...
Make the LEDs work.
2002-04-17 17:35:29 +00:00
c8b77487a2
When clearing interrupts, clear IPAC interrupts for cards that have
...
one.
2002-04-17 17:34:48 +00:00
2228f81f19
Fix two typos in comments. kern/16386 by Sean Davis.
2002-04-17 09:16:27 +00:00
b9abd324c6
Fix typo in comment. kern/16382 by Sean Davis.
2002-04-17 09:14:21 +00:00
88e968078c
Remove TLP_MATCH_* options.
2002-04-17 02:19:13 +00:00
e1f3e69604
* Move the mii_bitbang attribute into dev/mii/files.mii
...
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
2002-04-17 00:35:04 +00:00
20ddfbf4c1
Move sysmon configuration definitions to dev/sysmon/files.sysmon.
2002-04-16 21:00:27 +00:00
bbb03955e8
Centralize the RAIDframe config definitions.
2002-04-16 20:33:00 +00:00
5040dc6d7d
Remove last(?) traces of pmsi.
2002-04-16 11:49:54 +00:00
e5abb78d1a
regen
2002-04-16 10:08:58 +00:00
276fd6a576
add some C&T VGA chip
2002-04-16 10:08:34 +00:00
fa97a362d4
Support WI_RID_SCAN_APS (wiconfig -D) for Symbol CF Card.
...
It apparently requires newer firmware (3.10.4), and doesn't work on
Intel PRO/Wireless 2011 (2.0.11).
2002-04-16 07:24:06 +00:00
42c0a37e03
Add Krups (sparc) devices.
2002-04-16 03:08:12 +00:00
aa878fabc4
For 78Q2120 revisions 3 and earlier, punt to ukphy, as our special media status
...
routine does not work on those chips.
2002-04-15 16:50:52 +00:00
a40f47b098
Add support to Symbol Wireless Networker CF card.
...
The card is Type 1 CF card and it doesn't have firmware in.
So we need to download the firmware image into the card before
touching it.
XXX downloading code should be written in generic (bus independent),
but I don't have enough information for now.
2002-04-15 15:05:58 +00:00
410544177a
Generated from the firmware binaries for T3 series CF adapter.
...
Obtained from Tim Gardner <timg@tpi.com> who developoed the Linux driver.
And approved by Brad Lefore <blefore@sj.symbol.com> to redistribute it
with BSD license.
2002-04-15 14:58:51 +00:00
0a948745d1
Regen.
2002-04-15 14:44:30 +00:00
9d7578b25c
Use chip numbers for most of the new Adaptec IDs, not board numbers.
2002-04-15 14:43:42 +00:00
518cc55c27
Maxtor D040H2 also can't modesense
2002-04-15 12:40:28 +00:00
e200da16d8
Regen.
2002-04-15 11:12:46 +00:00
aad41f43b6
Add a bunch of Adaptec, Dell and HP products. From OpenBSD.
2002-04-15 11:12:25 +00:00
ed5298eb2f
Make the LEDs work.
...
Green LED = we have a TEI assigned, yellow LED slow blinking = one B-channel
in use, yellow LED fast blinking = both B-channels in use.
2002-04-15 08:11:00 +00:00
50d6d2b7d6
Add pcn, pnaphy.
...
Add algor, evbmips, sbmips devices.
Sort.
2002-04-15 07:37:17 +00:00
bc96c942e9
This card issues a constant stream of interrupts (from an internal timer).
...
Make it do this only while /dev/isdn is open.
2002-04-15 06:59:51 +00:00
3238830b82
rtc is used on hp300
2002-04-15 06:08:19 +00:00
f938ee8df6
Fix a couple of tyops.
2002-04-15 04:13:25 +00:00
dd80e6d577
Some fixes for Symbol card.
...
- The version string doesn't need to start with 'V'.
- Symbol firmware also support CREATE_IBSS.
- But it doesn't support ROAMING_MODE nor MICROWAVE_OVEN.
2002-04-14 19:55:23 +00:00
f00c3c2e40
tm_gpctl and tm_gpdata must be shifted right 16 bits. DOH.
...
This makes another CardBus tlp card work...
2002-04-14 19:10:18 +00:00
ab262fe6f0
Snarf-and-barf the `quirk' code from if_tlp_pci.c, and use it to set the right
...
mediasw (MII-over-SIO) on the Level One FPC-0101TX 10/100 card.
XXX This should probably key off subsystem IDs, not OUIs...
2002-04-14 17:17:10 +00:00
fda8de6495
bus_space_unmap() ctl_baseioh instead of ctl_ioh for the native case.
...
Pointed out by enami, and should fix kern/16307.
2002-04-14 16:55:08 +00:00
e4998611e9
Fix copyright notice.
2002-04-14 12:24:26 +00:00
8bbc2ff5a7
Added '#if defined(_KERNEL)' surrounging KERNEL_RCSID macro. Hpccmap is
...
used in bootloader too.
2002-04-14 09:07:04 +00:00
36c2231c92
Remove pmsi.
2002-04-14 01:45:29 +00:00
45c8aefabf
PR/16058: Tero Kivinen: Don't attempt to free resources that we failed to
...
get in the attach phase.
2002-04-13 17:06:53 +00:00
thorpej