e119d14fc9
Consistency changes only. Start sentences with a capital letter and end
...
them with a full stop.
2014-07-14 12:29:48 +00:00
e2d9ed5833
fix typo in comment
2000-10-14 17:01:29 +00:00
b5b6e95c7b
move default config files from /etc/default -> /etc/defaults, to be
...
consistent with what FreeBSD uses /etc/defaults for, and since SVR4
uses /etc/default for another purpose.
as discussed on tech-userlevel, and no objections were made.
2000-10-01 05:49:26 +00:00
0c020b6812
migrate guts of these /etc/foo.conf config files into /etc/default/foo.conf,
...
and source the latter in the former. this makes it easier for a sysadmin to
upgrade the default files without affecting local config, and retains the
semantics that the /etc/foo.conf files are the actual files that are edited
(as opposed to /etc/foo.local.conf or /etc/foo.conf.local or whatever, which
isn't as intuitive).
2000-08-21 23:06:22 +00:00
31a6224745
Move options into ntp_flags, to make it possible to add '-u' without
...
modifying rc.d/ntpdate
2000-08-21 14:48:39 +00:00
81958d9213
Add kdc/kdc_flags variables.
2000-08-06 21:34:17 +00:00
5da8f604df
Add $sshd and $sshd_flags for use by both usr.bin/sshd and pkgsrc/security/{open,}ssh
...
As a precedent, note the presence of $gated, even though we do not distribute
gated outside of pkgsrc.
2000-07-31 20:47:41 +00:00
e15f7a2a6f
clarify the difference between $critical_filesystems_beforenet and
...
$critical_filesystems, and why `/var' should be in the former (or
implied as part of `/' which is already mounted).
2000-07-22 01:09:44 +00:00
9c7a535df6
- be consistent in formatting sentences
...
- note that xdm might need wscons for local X servers (c.f. [install/9967])
2000-07-21 00:25:31 +00:00
202af8ae4a
Fix typo (enable -> enabled)
2000-07-02 18:18:20 +00:00
3c57129f75
Clarify comment that inetd only starts up IP-based services *that are
...
enabled in /etc/inetd.conf* (someone asked me last week why NetBSD doesn't
come with a telnet server...)
2000-07-01 20:03:44 +00:00
c60ddc2403
remove ip6defaultif configuration. because:
...
- ndp is in /usr/sbin, chokes on NFS-mounted /usr installation
- the option is just for IPv6 specification geek, not for normal users
2000-06-20 16:48:14 +00:00
00ded2c64e
add rc.d/ipsec for ipsec configuration. when enabled, it will inject
...
/etc/ipsec.conf into "setkey -f". PR 9609.
2000-06-13 16:29:53 +00:00
0ced5dd715
Enable -6 flag to nfsd.
2000-06-09 00:08:02 +00:00
5b78d0c312
Rename a remaing comment about portmap to rpcbind.
2000-06-03 17:23:59 +00:00
580b06b52e
s/portmap/rpcbind/
2000-06-02 23:23:27 +00:00
dd4d1cfbc2
Change xntpd to ntpd.
2000-05-02 12:17:28 +00:00
fad0a37405
Provide rc.d support for the Postfix mail system. Committed to the
...
base because there is no support for packages in rc.d, and Postfix
is supposed to become part of the base system anyhow.
2000-04-26 05:28:03 +00:00
a32696c2de
Death to nfsiod!
...
It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.
2000-04-15 21:14:48 +00:00
506c359083
Improve backwards compatability and leave securelevel the old way.
2000-04-09 21:00:04 +00:00
163510ecf4
The file /etc/sysctl.conf is now run with sysctl -f at boot time.
...
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.
The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.
2000-04-08 23:02:53 +00:00
52462864b7
ssh script removed, so remove sshd=NO line
2000-03-13 05:07:15 +00:00
292a9f03be
Since we have an "sshd" script in rc.d, we should have an "sshd" knob
...
in rc.conf.
2000-03-12 03:49:11 +00:00
020a8ac5b2
make clearing of /tmp after reboot configurable (default on), as per recent
...
discussion on current-users
2000-03-07 14:33:13 +00:00
a3aa7fe66f
add ip6defaultif configuration variable in rc.conf, for configuring
...
default outgoing interface for IPv6 host when default router list is empty.
the configuration is just for very rare case. it is safe to leave it empty.
2000-02-13 07:47:26 +00:00
e9056d34cb
change IPv6 configuration syntax to avoid ambiguity.
...
ip6mode=host: IPv6 host
ip6mode=autohost: IPv6 host, with autoconfig
ip6mode=router: IPv6 router
backward compatibility to "ip6forwading" is provided.
2000-02-05 17:02:42 +00:00
e80b8c24a3
remove extraneous flags for xntpd startup, since there is now a
...
default ntp.conf file, per PR 4312
2000-01-28 06:55:52 +00:00
5e1ff60d11
Change the name rc.conf.local to rc.local.conf. This makes *.conf match all
...
config files. Thanks to Greg Oster for the suggestion.
2000-01-18 22:43:23 +00:00
0028c40c50
While we're waiting for the new all singing, all dancing rc system, add
...
a way to configure local stuff; if the file rc.conf.local exists it
is sourced at the end of rc.conf.
2000-01-18 21:52:38 +00:00
f2672a9b29
We need to put /usr in critical_filesystems_beforenet since rc.subr
...
("mount_critical_filesystems local") makes no assumptions about /usr.
Under certain (semi-normal) conditions, /usr is never mounted until
"mount -a" late in rc(8), and This Is Bad.
1999-12-31 04:42:02 +00:00
623ede0b32
nit-picking spaces at EOL
1999-12-23 15:07:21 +00:00
be53038389
Consistency nit - use X11 in all comments not sometimes x11
1999-12-23 12:22:13 +00:00
c2ca3a16f3
Add a comment about the ifconfig_xxN variables.
1999-12-22 22:55:49 +00:00
c7a34c1de0
check for IPv6 kernel by exit status of "ifconfig lo0 inet6".
...
now IPv6 portion of netstart does not require /usr mount, it will mount it
as necessary (like pppd configuration do).
thanks goes to christos for the tip.
1999-12-20 15:12:23 +00:00
2d6fbd2789
Default to -z in savecore_flags
1999-12-06 20:38:13 +00:00
acc78cad94
accounting should be controllable via $accounting=YES in rc.conf...
1999-11-23 08:05:04 +00:00
0f6157b181
Remove update, it's no longer used.
1999-11-15 20:04:50 +00:00
80cfefa569
Disable portmap by default, and add some more comments in that section.
1999-11-05 11:19:49 +00:00
6e5d9aa87d
Add -f /var/db/ntp.drift to default xntpd parameters.
1999-10-09 21:07:19 +00:00
eac2fbdb83
Add support for $defcorename
1999-09-28 14:53:17 +00:00
02972f5985
add sanity check on rtadvd invocation (allowed on IPv6 routers only).
...
add rc.conf entry for rtsold.
1999-09-03 13:40:15 +00:00
79de537d1c
Screenblank has supported more than sun3 and sparc for a long, long time.
1999-08-16 20:01:03 +00:00
db20439533
repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus
...
"/usr" must be mounted. mount_critical_filesystems() didn't mount it,
even if listed in "critical_filesystems", if it is nfs.
Solution: introduce another rc.conf variable
"critical_filesystems_beforenet" which contains filesystems to be mounted
before "netstart".
Perhaps "netstart" should be split up, but this would make things even
more complex...
1999-07-07 21:24:56 +00:00
94e64335b4
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd).
...
Right now netsetart does not bother you even if you do not have
"options INET6" in the kernel.
1999-07-03 03:29:29 +00:00
aed7c5dbd9
usbd is dead.
1999-06-30 06:48:05 +00:00
05bdcfc198
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 03:30:02 +00:00
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
mbalmer