Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
68,769 Commits 606 Branches 0 Tags 3.1 GiB
c9dc8413bb
Commit Graph

1851 Commits

Author SHA1 Message Date
tls
c9dc8413bb Make our policy WRT tagged queueing consistent and sane: ordered tags for sync writes, simple tags for all else. Should make ahc and adv a bit more reliable (metadata writes won't get reordered incorrectly...) and isp a bit more performant (it was using ordered tags all the time). 2000-08-11 21:31:19 +00:00
thorpej
8cb7deb85b Add support for the DEC DE422 Ethernet, which is a DEPCA 
attached to the EISA bus.  This board is commonly found
on Alpha Jensen systems.
 2000-08-11 02:27:07 +00:00
tv
389bf995b5 %b -> bitmask_snprintf() 2000-08-09 01:56:33 +00:00
mjacob
0dc8c1fb35 Remove ispcmd_slow routine- SCBUSACCEL routine will set/clear tag/wide/sync. 
Make some changes about where some things sit in the softc.
 2000-08-08 22:58:30 +00:00
bjh21
4f33d5a8ab Register definitions for the C&T 82C710, 82C711 and 82C721, as used in 
the Acorn A5000, A4, A4000, A3010 and A3020.
 2000-08-08 22:14:53 +00:00
jeffs
aaa5c58d70 Update arc map routine prototype to compile again. 2000-08-08 02:11:05 +00:00
briggs
b103a8ca48 Label the buffer size as such on probe. 128 KB makes sense, but 4608 does not. 2000-08-06 00:19:04 +00:00
bouyer
a8421d4787 Some W83781 have ID 0x11 instead of 0x10; handle these too. 
Restore printing sdata for each sensors if DEBUG.
 2000-08-03 09:27:01 +00:00
castor
b6dd28b4ce Support some differences in the Macronix 98715AEC-C and E chips from the other 
98715* series.

The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.

Also, start integrating fixes where media changes on an adapter
under load may fail.  There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
 2000-08-03 03:07:30 +00:00
jeffs
e97c2066ab Add options DDB_BREAK_CHAR. This overrides break on the serial console 
break character with the supplied one.  This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled.  For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened.  Only supported in the com driver currently.
 2000-08-03 00:30:47 +00:00
bouyer
de378db998 W83781D: Explicitely reselect bank0 before using "value RAM" registers. 
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
 2000-08-02 22:20:41 +00:00
bouyer
e445e43ddc Add support for the W83697HF - basically a W83627HF with only 2 temp sensors. 2000-08-02 21:50:37 +00:00
mjacob
068c76fc80 Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some 
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
 2000-08-01 23:55:09 +00:00
briggs
02e3c1ef40 Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2. 2000-07-31 22:48:49 +00:00
ad
067f5e9814 Previous would have misbehaved if polled commands overlapped. 2000-07-31 13:16:34 +00:00
briggs
3628f3e00c Make sure that we do not call bus_space_*_multi_* with zero count. 2000-07-31 02:14:47 +00:00
bouyer
100a4a6b22 Add support for the W83781D and W83782D hardware monitors. 2000-07-30 22:23:53 +00:00
briggs
e6dde2bd42 Add MII support to smc91cxx driver. This is supported for the 91c100 
and 91c100FD (FEAST) controllers.  Existing controllers should continue
to work as they have.  Added the card's memory to the probe message.
 2000-07-30 21:34:47 +00:00
bouyer
538126d75a swap lm_match() and wb_match(), as wb_match() is more restrictive. 
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
 2000-07-30 17:22:26 +00:00
bouyer
e955a714ba Add support for the W83627HF: lm7x like, but with more sensors, and more 
registers.
 2000-07-27 21:49:22 +00:00
bouyer
ca5b9b0c22 Force 64bit arithmetic for timeout computation; a 32bit int opverflows for 
large timeouts. Should fix PR kern/10575.
 2000-07-27 21:28:17 +00:00
pk
4ba0c6b55c New time-of-day clock chip drivers. These implement the todr(9) interface. 2000-07-25 22:33:02 +00:00
bouyer
10afc4e0a8 create a funcion, siop_busreset(), to reset the scsibus. 
Reset the scsi bus at attach time, to be sure all devices start in narrow/async
mode.
Defer sync/wide negotiation until after whe have a valid
xs->sc_link->device_softc, so that we can honnor the NOSYNC/NOWIDE quirks.
 2000-07-24 15:15:00 +00:00
ad
74cf7af4a9 Increase polled command timeout to 2s. 2000-07-24 12:28:31 +00:00
onoe
afa5b645c2 add support for SIOCS80211NWKEY and SIOCG80211NWKEY. 2000-07-21 04:48:55 +00:00
scw
a1b8e79bb1 Take advantage of generic soft interrupts, if available. 2000-07-20 20:44:50 +00:00
deberg
0d5d0bd93a don't define LIST_FOREACH, it's in sys/queue.h now. 2000-07-20 03:47:56 +00:00
mjacob
c47c527343 add some more CTIO flags 2000-07-19 22:19:23 +00:00
mjacob
0615788781 zero result queue entry when done if debugging. 
don't do an isp_notify_ack if we're not at run state.
 2000-07-19 22:19:00 +00:00
mjacob
93379fb341 fix mislabelled error case 2000-07-19 22:18:02 +00:00
pk
f9e6c9cf42 Fixx off-by-one error in handlereset(). 2000-07-19 16:07:00 +00:00
onoe
0ab524f389 moved the check priviledge for SIOCS80211NWID from each driver to ifioctl(). 
it also fixes the problem that non-priviledged user can change nwid
for wi and ray drivers.
 2000-07-19 06:00:39 +00:00
ad
7d1b0e5b39 Use device_lookup() and ditch TAILQ sillyness. 2000-07-18 15:27:44 +00:00
drochner
54ccff0437 define "80x24" screen types for better vt100 compatibility 2000-07-15 18:47:54 +00:00
scw
20305c6623 Fix a typo in the `device_lookup()' changes. 2000-07-15 18:12:42 +00:00
soren
b141a6bfe8 Merge-o. 2000-07-14 21:09:45 +00:00
onoe
6c4d97da13 Indicate WEP capability to association request when WEP is enabled. 
Without this fix, some (IEEE802.11 conformant) APs will send data to this
station without using WEP.
 2000-07-11 12:54:00 +00:00
onoe
b99e56173c do not allow non-priviledged user to change nwid via ifconfig. 2000-07-10 14:36:17 +00:00
onoe
c2ed037f55 move associated/synced/no-recent-beacons messages to IFF_DEBUG. 2000-07-10 12:32:53 +00:00
mycroft
d621cc4cb0 Add missing newlines in some messages. 
Set Vpp the same as Vcc by default.  We need to do more with voltage sense.
 2000-07-09 01:55:18 +00:00
sommerfeld
dcf6e7b09e When receiving an rx interrupt on a closed or unconfigured port, read 
the data out of the board anyway so it won't re-interrupt anyway.
Fix tested by C Kane <ckane@best.com>
 2000-07-08 18:36:02 +00:00
mjacob
58a60a43f2 Gah. Bad port from FreeBSD code (thanks Robert Elz) for setting 
up default timeout for watchdogging commands.
 2000-07-07 03:14:53 +00:00
onoe
a4d6bdac79 do not show wep keys to non-root users. 2000-07-06 17:22:25 +00:00
thorpej
cb450cc444 Use device_lookup(). 2000-07-06 01:47:34 +00:00
mjacob
7ed7b1b9fd Per advice from thorpej, reinstated some of Erik's changes. 2000-07-06 01:17:38 +00:00
mjacob
f78b367775 Roll core version. Get rid of dogactive (no longer used). Add in some 
volatile flags (isp_mboxbsy- keeps a bitmask of expected output mailbox
registers) and storage for them (isp_mboxtmp). Get rid of macroized
LUN widths. This is determined at run time.
 2000-07-05 22:28:08 +00:00
mjacob
7358822ab5 Fix incorrect uint8_t vs. u_int8_t usage. Add in offset macros for outgoing 
mailbox regs and a INT_PENDING_MASK macro.
 2000-07-05 22:26:53 +00:00
mjacob
b520c663d0 add MBOX_GET_RESOURCE_COUNT command 2000-07-05 22:25:53 +00:00
mjacob
93778c19b8 pick up FreeBSD changes 2000-07-05 22:25:34 +00:00
mjacob
3626695b49 Roll platform minor. We are now always supporting ISP2100_FABRIC. Add 
in new MBOX_WAIT_COMPLETE/MBOX_NOTIFY_COMPLETE macros (ready for SMPizing).
Define STRNCAT inline for our usage.

Stealing a bit of the xs_status flags to maintain command state that
is pertinent for the hBA- should really reserve them for private usage
in scsipiconf.h.
 2000-07-05 22:25:06 +00:00