* bssid xx:xx:xx:xx:xx:xx -- set the desired BSSID of an 802.11
interface.
* -bssid -- unset the desired BSSID of an 802.11 interface, so
the interface will choose automatically (default).
* channel x -- set the channel (radio frequency) of an 802.11 interface.
Current BSSID and channel are now reported in the 802.11 status
display, if supported by the interface.
Above changes from David Young <dyoung@ojctech.com>, with some slight
changes by me (use ethers(3) functions rather than hand-parsing/printing
the 802.11 address).
Document bssid/-bssid/channel, and clean up markup of parentheticals
in the manual page.
Currently, only Aironet ("an") driver/card can be used.
nwkey persist (IEEE 802.11 devices only) Enable WEP encryption for IEEE
802.11-based wireless network interfaces with the persis-
tent key written in the network card.
nwkey persist:key
(IEEE 802.11 devices only) Write the key to the persis-
tent memory of the network card, and enable WEP encryp-
tion for IEEE 802.11-based wireless network interfaces
with the key.
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
a meaningful option.
- Don't captialize the word address or interface when it refers an arugment.
- Use .Ar macro for dest_address since it is not a keyword.
that gifconfig(8) would issue to configure tunnel endpoints. This
allows IP tunnel interfaces (`gif' right now, and `gre' later) to
be configured with ifconfig(8), and via /etc/ifconfig.<interface>.
Partially taken from similar changes in OpenBSD.
- Const poison the command functions a bit. We really need to clean
up the command function interface.
this is intentional - IPv6 assumes multiple addresses on an interface,
and it is not very safe to "delete" arbitrary one. -alias with
explicit IPv6 address works fine.
(i.e., 10baseT carrier/no carrier) of an interface from scripts
ifconfig -s <interface> will exit with a false status if the interface
reports its unconnected.
-s also works in conjunction with -l and -a, filtering out interfaces
which are reporting down.
Also, add -b (which shows only broadcast interfaces with -l and -a).
I find these options useful in network autoconfig scripts for mobile
systems.
- new "media" keyword specified media to select:
ifconfig de0 media utp
- new "mediaopt/-mediaopt" keywords for setting/clearing
media options (such as full-duplex)
- new "-m" flag to display all supported media types for
a given interface.
Also, some generial cleanup of argument parsing while I was there.
Manual page updates from Jeremy Cooper <jeremy@netbsd.org>.
onoe