01bd8a8ca8
Initialize `f_offset'.
1997-01-28 09:41:03 +00:00
981d496969
Change file system file-open semantics slightly: if file system returns
...
EINVAL, that error code is ignored, leaving whatever other meaningful
error code that might have previously been returned intact. Stand-alone
file system implementations return EINVAL typically when the file system
is not recognized (i.e. cd9660_open on a UFS file system, ufs_open on a
cd9660 file system, etc.). This meant that if you had multiple file
systems in a file system switch, the first returned ENOENT (because
it recognized the file system type, but the file wasn't there) and
the second returned EINVAL (because it didn't recognize the file system
type), errno would be set to EINVAL. Now it'll be set to ENOENT.
It would probably make sense to have file systems return a special
error code to indicate "this file system is unrecognized," which
could then be special-cased, but that's a fair bit more invasive.
1997-01-25 01:13:41 +00:00
da4932bff2
add EINVAL and ENOTDIR, as suggested by Matthias Drochner
1997-01-25 00:37:50 +00:00
192e22f5b7
isonum_722 and isonum_732 are now back in iso.h
1997-01-24 00:53:40 +00:00
6f0de181b1
update for iso.h changes which remove the need for the nastiness that was here
1997-01-24 00:29:19 +00:00
3ca5f41d59
clean up substantially. Transform clean, depend, cleandir targets from ::
...
to :, so they can be used e.g. with <bsd.prog.mk>. Standardize variable
names used to configure kernel libraries.
Variables used by these Makefile.inc's are:
S must be set to the top of the 'sys' tree.
${LIB}DST may be set to the location of the directory where library
objects are to be built. Defaults to ${.OBJDIR}/lib/${lib}.
${LIB}_AS may be set to 'obj' to build a object from the library's
object files. (Otherwise, a library will be built.)
Defaults to 'library'.
${LIB}MISCMAKEFLAGS
Miscellaneous flags to be passed to the library's Makefile when
building. See library's Makefile for more details about
supported flags and their default values.
(where LIB is KERN, SA, or Z, and lib is kern, sa, or z, depending on which
library's Makefile.inc is being discussed.)
1997-01-23 22:29:07 +00:00
2ce4559663
clean up variable use, standardize with other kernel library Makefiles.
...
rename 'NO_NET' variable to SA_INCLUDE_NET, which defaults to 'yes' but can
be set differently. kill EXTRACFLAGS, add SACPPFLAGS (generated from
CPPFLAGS by Makefile.inc) to CFLAGS. Add support for including gzipped-file
read support, enabled by setting SA_USE_CREAD to yes (defaults to no).
1997-01-23 22:19:56 +00:00
25bd886ba9
fix a typo (ZPPFLAGS should have been ZCPPFLAGS)
1997-01-22 01:36:30 +00:00
ea27b7aa31
Add a whole bunch of features, from Matthias Drochner:
...
best-fit, rather than first-fit, algorithm.
ability to handle free()s with zero size (needed for gzip read
support).
ability to start the heap someplace else (defined by HEAP_START).
ability to limit growth of the heap (via HEAP_LIMIT).
debugging sanity checks (ifdef DEBUG).
allocation tracing support, to help debugging (ifdef ALLOC_TRACE).
and from me:
ability to pick a (smaller) first-fit algorithm (via ALLOC_FIRST_FIT).
lots of comments.
If heap limits and all of the debugging features are disabled (the default),
and ALLOC_FIRST_FIT is defined (not the default), compiled with -O on the
alpha the new version is the same (object) size as the old version.
1997-01-22 01:18:23 +00:00
862c1d585c
code to open/close/read/lseek gzipped files, from Matthias Drochner.
1997-01-22 00:40:07 +00:00
21979e8d6b
define these functions with an 'o' prepended to their names if
...
__INTERNAL_LIBSA_CREAD is defined (so that they can be used by the
compressed-read code).
1997-01-22 00:38:09 +00:00
b581a80665
prototype lseek(). also, prototype oopen(), oclose(), oread(), and olseek()
...
if __INTERNAL_LIBSA_CREAD is defined.
1997-01-22 00:37:23 +00:00
d867ed50cc
add strchr() to libkern. strchr.c copied from libc's "index.c", but with
...
appropriate definitions so that it'll build strchr(), and so that it builds
correctly in libkern (needed to #define NULL).
1997-01-18 02:33:38 +00:00
493bd9e110
fix file system buffer leak that occurs if an error occurs (e.g. file not
...
found) during the file system open function after having read some data
from the disk. From Matthias Drochner (PR 3120).
1997-01-17 20:17:58 +00:00
9596fd8a77
only call the device close routine on a (fall-through) error if
...
F_NODEV isn't set in the file flags for the file being opened.
Pointed out by Matthias Drochner in PR 3122. (fix equivalent to
the one he included, but stylistically different.)
1997-01-17 20:03:53 +00:00
9be91c7fb4
fix my typo; found by Klaus Klein <kleink@layla.inka.de>
1997-01-17 17:06:06 +00:00
313f6180e6
add prototypes for ethers(3) functions; fixes PR 2471.
...
fix suggested by Jason Thorpe.
1997-01-17 08:17:57 +00:00
b1f42c3a13
add memcmp, implemented as a wrapper around bcmp() (like memcpy() is
...
implemented as a wrapper around bcopy()).
1997-01-16 04:06:15 +00:00
f515ce7937
add sources, all copied verbatim from src/lib/libz
1997-01-16 00:21:43 +00:00
e18d476d7c
add Makefiles to build kernel 'libz' library, expected to be used by
...
boot blocks to load compressed images. Sources and headers are copied
from src/lib (src/lib/libz, in particular) by making the 'update-sources'
target in this directory. This library builds in a manner similar to
libkern; much of the Makefile hackery was taken from there.
1997-01-16 00:19:04 +00:00
3ec6dad0f1
Typo police from: Juergen Hannken-Illjes
1997-01-02 22:06:51 +00:00
12729c12d1
Add missing `#ifdef NFS_DEBUG' (from Rolf Grossmann; PR#3061).
1996-12-27 11:55:58 +00:00
3463f39651
PR/2981: use ${VAR:Q} instead of '${VAR}' to avoid quoting problems
1996-12-26 21:32:37 +00:00
2c8d554885
PR/2981: use ${VAR:Q} instead of "${VAR}" to avoid quoting problems
1996-12-26 21:32:08 +00:00
8f3917c76e
Move _MCOUNT_DECL prototype back here again (grmbl).
1996-12-07 12:58:25 +00:00
4827ca5603
Remove _MCOUNT_DECL prototype declaration of _mcount() again; move it
...
to <machine/profile.h>
1996-12-05 10:18:46 +00:00
1a260961e0
Add prototype for _mcount, to make this compile with warnings on.
1996-12-04 00:04:40 +00:00
15dc36463a
We use C flavors of the quad support functions in libkern.
1996-12-03 19:35:42 +00:00
bd9ec27d9e
kvprintf => vprintf (PR#2989, Juergen Hannken-Illjes).
1996-12-01 20:22:19 +00:00
033eec34ec
Oops... get the vprintf prototype right.
1996-11-30 04:35:51 +00:00
ecfe88202c
Add declaration for vprintf.
1996-11-30 04:20:14 +00:00
dfc25d8ab4
Finish the kprintf backout: kvprintf -> vprintf was missed.
1996-11-30 04:19:21 +00:00
6621382048
Sync with libc
1996-11-30 02:06:27 +00:00
87e006459e
sync with libc source: remove DEFS.h
1996-11-18 22:50:28 +00:00
fa80fdb243
Remove `chmod 444's.
1996-11-18 22:48:59 +00:00
458e5a37c9
include libkern.h, not types.h, to get prototype. (libkern.h includes types.h)
1996-11-13 19:30:39 +00:00
eb8718eafb
* Pull up files from lib/libc/arch/ns32/string.
...
* DEFS.h and setjmp.S are no longer in use.
1996-11-07 07:36:05 +00:00
bba547e063
second and third args to scanc() (string and table) are not and should not
...
be modified. Make them 'const'.
1996-10-24 23:50:31 +00:00
311fcee75f
when casting const pointers, preserve const qualifiers. (-Wcast-qual)
1996-10-24 23:45:32 +00:00
e6d0f7439f
copy down changes from libc
1996-10-17 04:26:20 +00:00
f929fef799
pull down from libc
1996-10-17 01:41:35 +00:00
a5461e87e1
Delete spurious #endif
1996-10-14 21:16:55 +00:00
40bcaca9ac
fix a bogon in some new functionality apparently added in the last
...
commit (which was supposed only to back out the printf->kprintf changes).
The new functionality is: if the user enters control-D, return an error.
1996-10-14 04:49:21 +00:00
e44c1d1f33
backout previous kprintf changes
1996-10-13 02:28:58 +00:00
92a808f167
backout previous kprintf changes
1996-10-13 02:21:25 +00:00
60d201973e
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:46:11 +00:00
2b33d9d53a
- printf -> kprintf, sprintf -> ksprintf
...
- use a debugging printf macro instead of #ifdef #endif everywhere.
1996-10-10 22:45:37 +00:00
63a2506f79
Merge netbsd-1-2 branch back into mainline.
1996-10-09 01:15:04 +00:00
bd581c1c73
fix several endianness bugs that caused name lookup (!!) and symlink
...
expansion to fail on little-endian machines.
1996-10-02 20:28:26 +00:00
31afb65969
Remove superfluous -I. accidently introduced when I imported the PPC port
1996-10-02 16:19:51 +00:00
5804d3f648
PowerPC port
1996-09-30 16:34:14 +00:00
fd225e6527
Add support for booting from cd9660 fs
...
Support directory traversal and symbolic links for nfs booting
Close device when file opening failed
Plug memory leak in ufs code
1996-09-30 16:01:18 +00:00
d67d39b37c
Allow compilation of libkern as library for standalone programs
1996-09-30 15:54:35 +00:00
bbfe67624b
enough 64-bit fixes to make network booting work on the Alpha. In general,
...
these are hacks (s/long/int/, etc.), but this code really needs a heavy
cleaning (including fixed-size typing) and I don't have time to give it one
now.
1996-09-26 23:22:01 +00:00
f496a53cbf
make sure new allocations are aligned.
1996-09-26 23:15:00 +00:00
f4888b894a
label changes, pulled down from libc
1996-09-26 23:04:30 +00:00
a08c3a1feb
Handle relative paths to the source directory if they begin with a '.'.
1996-09-23 05:00:45 +00:00
788923c1ab
add a missing #else, pointed out by Wolfgang Solfrank
1996-09-22 16:23:31 +00:00
79e03b2967
Pass $STRIP to the sub-make.
1996-09-09 18:03:46 +00:00
0794023752
RCS id police.
1996-08-30 17:43:56 +00:00
bdbfa48c0b
Add machine-independent assertion-checking support. macros are:
...
assert() which always does assertion checking
unless "NDEBUG" is defined.
KASSERT() which does assertion checking if DIAGNOSTIC
is defined.
KDASSERT() which does assertion checking if DEBUG is
define. This macro exists for compatibility
with existing ports' assertion checking macros.
(Assertion checking is not typically an
"expensive" operation, and DIAGNOSTIC should be
used for inexpensive consistency checks.)
1996-08-27 00:44:20 +00:00
fb6d196140
fix up for new libkern path specs
1996-08-21 19:18:47 +00:00
030f7ba872
Added to libkern in preparation for change from b* to mem*.
1996-08-15 22:59:11 +00:00
811315ca92
Add anchors so that only exactly `-I. is modified.
1996-08-10 04:01:29 +00:00
9c5b0780c0
Convert the -I. to -I${.OBJDIR}, so that the `machine symlink is available.
1996-08-10 03:00:51 +00:00
44f440543f
We dont need to pass down COMPATDIR and KERNDIR.
1996-08-08 15:15:16 +00:00
3f0b5a641e
Run the child make in the source directory, so that nothing here needs to be
...
changed when the compile directory is outside the source tree.
1996-08-08 15:06:39 +00:00
a906c164d2
frob the mask so that only the low set bit is set, to avoid lossage.
1996-07-15 05:20:19 +00:00
3f38b4d7ad
add an assembly version of ffs(), copied down from libc
1996-07-15 03:13:41 +00:00
8042054add
remove some unnecessary and broken casts on char *'s which are being subtracted
1996-07-10 18:41:38 +00:00
910efd056e
nfs_read and nfs_write return 'int' rather than ssize_t.
1996-07-10 18:32:33 +00:00
de7ece6ce5
Prevent recursive invocation of mcount() while in kernel by setting profiling
...
state to BUSY while in mcount(). This allows profiling to work when mcount()
calls a profiled routine (for example, udiv on the SPARC).
1996-06-29 14:30:32 +00:00
51347fcaaa
Return useful file descriptor when opening a raw device.
1996-06-21 20:51:23 +00:00
68f420b593
Oh, what's in a name..
1996-06-21 20:29:28 +00:00
b461ef1d17
Allow seeks on raw devices. A `f_offset' field is added to the file structure
...
which is maintained in lseek(), read() and write(), and passed along to
the device's strategy routine.
1996-06-21 20:09:03 +00:00
e1078396e5
copy down from libkern:
...
>use p->hashfraction when doing non-time-critical calculations, rather than
>using HASHFRACTION directly. in time-critical calculations, if HASHFRACTION
>is a power of two, check that p->hashfraction == HASHFRACTION and if so do
>the calculation with the compiled-in value so that the compiler can optimize
>out (potentially) expensive divisions. if p->hashfraction != HASHFRACTION,
>actually do the division. This has the result that on machines with slow
>division, the division can be optimized out of the common case, but that
>if HASHFRACTION changes from the compiled-in value (for whatever reason),
>profiling will still work. Changes suggested by Chris Torek.
1996-06-12 04:16:53 +00:00
352d972c94
locc() is unused. Remove it from the machine-independent kernel interface.
1996-06-10 15:33:33 +00:00
433594b99d
missing semicolon
1996-06-03 22:11:23 +00:00
28061842a2
Fix include file order to confirm to KNF in master tree also.
1996-06-02 13:28:21 +00:00
efd9d2dc7f
Copy from libkern:
...
Add some casts so that we're not bitten by type promotions on 64-bit
systems. Not a great concern since the only 64-bit system currently
supported by NetBSD (Alpha) uses assembly versions of these routines.
1996-05-29 23:39:30 +00:00
663808dfc5
use ' not " when passing variables to a sub-make. pr#1199/pr#1296
1996-05-20 17:23:25 +00:00
c9a8578d2b
Fix gcc -Wall warnings about printf arguments.
1996-05-14 10:28:18 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
e901286aad
When sending an ARP request, use the interface address for the route, rather
...
than the first address assigned. This gives slightly different behaviour in
the presence of aliases. From Bill Fenner, via Pete Bentley.
1996-05-11 12:59:55 +00:00
ba554befe5
Make sure we clean up libkern.o and libkern.po, too. Closes PRs 1951
...
and 2387.
1996-05-10 21:27:32 +00:00
d4fcd14ee3
No longer needed. The netbsd config for gcc/arm has been fixed to generate
...
correct profiling code.
1996-04-26 20:07:43 +00:00
39b959c810
Added copyright message.
1996-04-26 20:05:28 +00:00
0ca6a87952
Remove memset.c; it is not currently used, and .c files should belong in
...
the MI portion of libkern. When/if we move to use mem* routines in the kernel
we can add it to the MI portion/write a memset.s.
1996-04-23 23:05:22 +00:00
4a134a0780
don't include user-land headers in libkern files when compiling for
...
the kernel.
1996-04-18 02:19:59 +00:00
1813cc71d0
don't include user-land headers in libkern files when compiling for
...
the kernel. memset.c does not belong here. it either belongs in
the MI libkern directory, or does not belong in libkern at all.
1996-04-18 02:19:07 +00:00
55afd9912f
don't get rid of the -D_KERNEL in KERNCPPFLAGS
1996-04-18 02:14:48 +00:00
a5dc646be0
use assembly version of strcat (copied down from libc)
1996-04-18 01:53:04 +00:00
eccf43e127
files copied from libc
1996-04-17 22:46:34 +00:00
e70b1375c9
add strncasecmp.c to ports' libkern Makefile.inc's. When adding a new
...
source file to libkern, it should be added to _ALL_ ports makefiles if
it is machine-independent and used by machine-independent code (in
this case adosfs). (There are several arguments that say that
strncasecmp should not be in libkern at all, and i think they're
good ones, but as long as ADOSFS needs it to link, it has to be here
for all architectures.)
1996-04-13 01:17:27 +00:00
fb901eb966
- Add missing prototypes
...
- Bring prototypes into scope
- Correct prototype for skpc
1996-03-14 18:52:03 +00:00
e494b8793f
Back out previous change.
1996-03-11 05:46:51 +00:00
c31eae0510
Back out previous change.
1996-03-11 05:31:59 +00:00
e142a2195f
Provide a memset() for the i386 (assembly version), and move memset.c
...
out into the libkern proper in case other ports want to use it.
i386 kernels with COMPAT_LINUX should compile now.
1996-03-11 03:19:37 +00:00
056810ed99
Make this code independent of <sys/nfs> now that we use very little
...
from there anyway, so we can ignore changes in the NFS code...
1996-02-26 23:05:14 +00:00
6a0803ca9a
Make these build again in the wake of the v3 changes
1996-02-26 21:50:07 +00:00
c24557134f
Needed for NFS booting; we aren't likely to use v3 here any time soon.
1996-02-26 21:49:34 +00:00
1cb0b13391
Add declaration of strncasecmp.
1996-02-13 23:48:26 +00:00
14d9cd33af
netinet prototypes
1996-02-13 23:40:59 +00:00
b3ba75d64e
use vprintf where appropriate
1996-02-09 16:10:59 +00:00
7ce27395a6
Need vprintf() for things like panic().
1996-02-08 20:19:36 +00:00
b07937f401
Make it really work like strncasecmp, instead of 0/1 return codes.
1996-02-06 21:35:31 +00:00
70552d3392
Add strncasecmp.c; extracted from ADOSFS adlookup.c.
1996-02-06 21:22:00 +00:00
f96fc7f12e
Simplify, and add support for passing CPPFLAGS.
1996-02-02 20:34:38 +00:00
f56b429c95
Initial commit of the NetBSD/arm32 port.
1996-01-31 23:44:43 +00:00
43349cd7ef
Add a memcpy() function, just a cheezy wrapper around bcopy(). Yes,
...
it's really true...we didn't have one before, even though the Makefile
thought we did. (Yes, I checked the Attic...)
1996-01-30 19:45:34 +00:00
38c7f668a2
Clean-up open/close logic of "net" device. Fixes PR 1726
1996-01-29 23:54:14 +00:00
b7b97847ce
Some files containing more than one function are split. This reduces the
...
size of the resulting loader. The read_inode() function now returns the
result of the strategy function instead of success in all cases (ufs.c).
Fixes pr#1817
1996-01-13 22:25:32 +00:00
284c0cd0b1
Make `time difference' a signed quantity explicitly.
1995-12-13 23:38:10 +00:00
63a836a44a
Check return value from sendrecv so that ARP timeout does not cause
...
garbage to be entered into the ARP table. Also fix ARP_DEBUG code.
1995-12-08 04:12:53 +00:00
63e145ebd7
Correct error which caused truncation of port number on i386 (PR#1823)
1995-12-08 04:10:28 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
87093145ce
Use bzero() instead of memset(..., 0, ...).
1995-11-29 06:12:08 +00:00
dfad729a16
make netinet work on systems where pointers and longs are 64 bits
...
(like the alpha). Biggest problem: IP headers were overlayed with
structure which included pointers, and which therefore didn't overlay
properly on 64-bit machines. Solution: instead of threading pointers
through IP header overlays, add a "queue element" structure to do
the threading, and point it at the ip headers.
1995-11-21 01:07:34 +00:00
40a4907f5e
oops; i forgot these u_int -> size_t conversions.
1995-10-20 01:35:25 +00:00
6b49a2ceed
copy from libkern
1995-10-20 01:16:02 +00:00
35742ffe0a
use NetBSD RCS id format. use bzero.S, not bzerro.c
1995-10-20 01:15:37 +00:00
47667c7df1
set, don't add to, CFLAGS from KERNCFLAGS. Do assignment of CC and
...
CFLAGS earlier, so that the arch-specific Makefile can add to them.
1995-10-20 01:10:06 +00:00
51f39e4840
fix prototypes here, to match u_int->size_t changes in ufs.c
1995-10-20 00:54:17 +00:00
d7a207fd49
update from libc
1995-10-20 00:53:28 +00:00
6c46625cf7
cast pointer to long, not int
1995-10-20 00:47:47 +00:00
2677a05d99
fix spacing in header 'room to leave' comment
1995-10-20 00:46:30 +00:00
e7290be2cd
add prototypes for static functions. make ffs_oldfscompat static.
...
fix some arguments and structure members, in recognition of the fact
that (u_int == u_long == size_t) is not true on all systems.
1995-10-20 00:42:21 +00:00
af8ead3302
Fix from Jochen Pohl which fixes case where quad multiply
...
goes awry if bit 31 of at least one of the operands is set
(PR #1591 ).
1995-10-12 15:05:35 +00:00
600acb3b06
Conditionalize ancient `@' and `#' erasors.
1995-10-11 21:16:57 +00:00
9782971b02
Remove setjmp() and ffs().
1995-10-07 22:26:53 +00:00
209bd1b877
Build libkern as one .o file, so that all symbols defined therein are
...
always available to loadable modules.
1995-10-07 09:56:54 +00:00
120925e7c3
Remove bzero.S and setjmp.S, as these functions are in locore.
1995-10-07 09:52:48 +00:00
a09832e624
Update from libc.
1995-10-07 09:26:14 +00:00
1f494d0265
Don't add network files to SRCS if NO_NET is defined. (I'm getting
...
very short of disk space on STEELHEAD!) The pc532 doesn't use the
network (yet?) from boot.
1995-10-01 06:00:32 +00:00
de4e651542
Careful with initializers.
1995-09-27 23:14:57 +00:00
65c53f255c
Remove old .PATH directives that referenced libc source.
...
Libkern has its own copies of all the requisite source files.
1995-09-26 18:27:24 +00:00
230fb12a7a
Add abs() function as an 'inline'. The atari-port needs it since the
...
-fno-builtin is used in the kernel Makefile.
1995-09-23 20:35:47 +00:00
df8c694f7e
Add an inet_addr() function; return network-order numeric representation
...
of an IP address from `aa.bb.cc.dd'-style text input.
1995-09-23 17:14:40 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
6f2a9404ee
More cleanup: change some private types to eliminate casts,
...
replace some "goto xxx" with return(-1). (mostly cosmetic)
1995-09-23 03:36:06 +00:00
bdad6c4104
Fix/improve some comments.
1995-09-23 03:31:50 +00:00
c9a13fa080
Assume that if devopen() points `file' at a NULL that a raw device was
...
opened (as opposed to only checking to see if `file' itself is NULL).
1995-09-19 09:16:52 +00:00
d9124da47f
Another round of clean up, including fixes presented by Matthias Drochner
...
(PR#1404). Things to be noted:
- all IP addresses are now `struct in_addr's.
- the function rarp_getipaddress() no longer return `myip'; in stead
it returns -1 on failure (errno set), 0 on success. `myip' is set
as a size-effect.
1995-09-18 21:19:18 +00:00
f5cf4bbc37
De-activate DEBUGFLAGS again.
1995-09-17 01:01:07 +00:00
82e5cf06bc
Revert fs_ops read/write declarations; these return error numbers.
...
Get rid of some more compiler warnings.
Set errno where appropriate.
1995-09-17 00:49:37 +00:00
7824355d25
libsa compilation is no longer controlled from here, obviating the purpose
...
of this makefile.
1995-09-15 21:04:33 +00:00
84c517c128
Clear up some size_t/ssize_t confusion.
1995-09-14 23:45:21 +00:00
0c92121b3f
Mirror libkern makefiles.
1995-09-14 20:55:00 +00:00
0081434965
Correct the padding to min Ethernet packet size.
1995-09-13 15:06:12 +00:00
eb50acd998
Changes from Gordon Ross:
...
a) check against `my' ethernet or broadcast addresses done in
ether.c
b) changed interface to readether() to provide ethertype info
c) respond to arp requests when appropriate.
First two are clean-up. Last fixes hp300 and presumably mvme68k netboot
code.
1995-09-11 21:11:36 +00:00
pk