This avoids the stupid null deref I added a couple of commits
ago (on bad usage) and also simplifies the rest of the routine
which no longer needs to check the arg count nearly as much.
Thanks to Alexander Nasonov for finding the null deref bug.
ispell also says that we should s/parseable/parsable/ but I'm
not sure about that one, so I left it.
I also left a correct spelling that no-one has bothered to mangle!
nanoseconds, 9 digits) the kernel happens to send in the timestamps
in log messages.
Output (numeric) timestamps (when produced) are unchanged and always
in microseconds (for now).
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
identd has aliasing violations, use -fno-strict-aliasing.
newfs_msdos's getbpbinfo() has missing {} issues.
sysctl's kern_cp_id() has missing {} issues.
convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.
raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument
rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.
rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.
move several of the per-ioctl code blocks into separate functions.
add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.
add missing case for RAIDFRAME_GET_INFO50.
adjust raid tests to use the new .conf format, and add a case to
test the old method as well.
raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)
note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.
1. Don't force use of "for" when "while" works better.
2. No need to check c != '\0' when we also check (c == ' ' || c == '\t')
3. Use the size of the buffer we're using, rather than a different one
(not really a concern, they're the same size)
4. Don't use fscanf() to read file data, use fgets() & sscanf().
5. After using a pointer as a char *, validate alignment before switching
to int * (can only fail if kernel #define gets set stupidly) Or #6...
6. Validate sparemap file name isn't too long for assigned space.
7. recognise that strlen() returns size_t - don't shove it into an int.
8. On out of mem, be more clear which allocation failed in warning msg.
ATF tests all pass. But I don't think they use sparemap files.
This is a legacy interface from 4.4BSD, and it was
introduced to overcome shortcomings of ptrace(2) at that time, which are
no longer relevant (performance). Today /proc/#/ctl offers a narrow
subset of ptrace(2) commands and is not applicable for modern
applications use beyond simplistic tracing scenarios.
This removal will simplify kernel internals. Users will still be able to
use all the other /proc files.
This change won't affect other procfs files neither Linux compat
features within mount_procfs(8). /proc/#/ctl isn't available on Linux.
Remove:
- /proc/#/ctl from mount_procfs(8)
- P_FSTRACE note from the documentation of ps(1)
- /proc/#/ctl and filesystem tracing documentation from mount_procfs(8)
- KAUTH_REQ_PROCESS_PROCFS_CTL documentation from kauth(9)
- source code file miscfs/procfs/procfs_ctl.c
- PFSctl and procfs_doctl() from sys/miscfs/procfs/procfs.h
- KAUTH_REQ_PROCESS_PROCFS_CTL from sys/sys/kauth.h
- PSL_FSTRACE (0x00010000) from sys/sys/proc.h
- P_FSTRACE (0x00010000) from sys/sys/sysctl.h
Reduce code complexity after removal of this functionality.
Update TODO.ptrace accordingly: remove two entries about /proc tracing.
Do not keep legacy notes as comments in the headers about removed
PSL_FSTRACE / P_FSTRACE, as this interface had little number of users
(close or equal to zero).
Proposed on tech-kern@.
All filesystem tracing utility users are encouraged to switch to ptrace(2).
Sponsored by <The NetBSD Foundation>
and any other place that might have the same ioctl name while having
something not quite right (in this case, cpuid_t in headers not
working properly..)
XXX: pullup-8
route command exits if it receives <count> routing messages where
<count> is a value specified by -c.
The option is useful to get only particular message(s) in a test script.
CAN stands for Controller Area Network, a broadcast network used
in automation and automotive fields. For example, the NMEA2000 standard
developped for marine devices uses a CAN network as the link layer.
This is an implementation of the linux socketcan API:
https://www.kernel.org/doc/Documentation/networking/can.txt
you can also see can(4).
This adds a new socket family (AF_CAN) and protocol (PF_CAN),
as well as the canconfig(8) utility, used to set timing parameter of
CAN hardware. Also inclued is a driver for the CAN controller
found in the allwinner A20 SoC (I tested it with an Olimex lime2 board,
connected with PIC18-based CAN devices).
There is also the canloop(4) pseudo-device, which allows to use
the socketcan API without CAN hardware.
At this time the CANFD part of the linux socketcan API is not implemented.
Error frames are not implemented either. But I could get the cansend and
canreceive utilities from the canutils package to build and run with minimal
changes. tcpudmp(8) can also be used to record frames, which can be
decoded with etherreal.
Since day0 pt_exec.c shipped with a dummy stub for "exec" operation, stop
waiting longer and eliminate it now. This functionality can be achieved
with filters.
Drop FreeBSD CVS repos references. There are certainly still some mirrors
or old mirrors available, but since the project moved to SVN+GIT entirely
drop it.
Add CVS Id - where missing - to the documentation files. This helps users
to determine how recent are the files.
- Expand the SMART / Health Information Log Page (Page 02) printout based on
NVM Express 1.2.1 Standard.
- Implement Intel-specific log pages.
- Implement HGST-specific log pages.
- Implement wdc-specific nvme control options.
- Add the ability to dump log pages directly in binary to stdout.
support for Endian-Independent FFS and Apple UFS is disabled unless FFS_EI=1
and APPLE_UFS=1 are added to CRUNCHENV, respectively.
This reduces the size of ramdisk image for atari by over 15KB.
Thanks tsutsui and christos for their useful comments.
In the prototype of the gzclose() function of changed from:
typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
to:
typedef voidp gzFile;
This caused type mismatch when calling funopen(3) as:
'int (*)(void *)' != 'int (*)(struct gzFile_s *)'
Cast gzclose to (int (*)(void *)) when used in funopen(3).
default, build a handful of tools as n64 so they work properly.
unfortunately, they're also static as dynamic n64 has a problem.
of these tools pstat is probably the lowest hanging fruit to convert
to sysctl. systat would be close were it not for the netstat screen,
which includes netstat itself.
the rest are difficult to perhaps foolish.
the upside is that netstat, pmap and fstat all work properly now.
routed previousely ignored local routes, which have RTF_LOCAL flag, because
such routes have RTF_LLINFO and routed ignored routes having the flag. When
we obsoleted RTF_LLINFO, we removed the ignoring logic from routed, then
routed started removing local routes unexpectedly.
Fix this behavior by teaching local routes to routed to ignore them.
kardel@ reported the issue and helped testing, thanks!
small or wildly too large intervals, but it did allow intervals that
failed at poll(). Since that's signed integer overflow and thus UB,
better not to.
Reject packet intervals < 1 ns as they lead to infinite loops adding
zero timespecs.
Fix the behind-schedule behavior so it doesn't spend all its time in
that loop adding very small timespecs. Try ping -c 500 -i 0.000000001
to see this in action with the old ping.
Check for values between INT_MAX and LONG_MAX (if they're different)
when using strtol to get an int. This applies to the -c and -l options;
the other uses were already checked.
Also limit the inter-packet interval given with -i to values that
don't cause integer overflow calling poll() with milliseconds.
Really large intervals (the number is read as floating point) can
produce positive poll() values but negative integers when converted to
struct timespec; this produces behavior akin to using -l at first and
could be construed as a local DoS vulnerability.
Now you can do
# mount_puffs -o rdonly rot13fs#/home/foo /mnt/rot13
or in fstab
rot13fs#/home/foo /mnt/rot13 puffs rdonly
to start rot13fs with arguments identical to
# rot13fs -o rdonly /home/foo /mnt/rot13
parameters/enables for error recovery, similar to {get,set}cache.
Many old SCSI disks shipped with reallocation disabled, albeit supporting it.
Minor (cosmetic) fixup of scsi_disk_pages while there.
Based upon code in PR bin/29165 by Greg A. Woods.
OK christos@
alnsn