4c64781365
Moved the actual model identification work into identifycpu(),
...
which used to be in _startup.c:_verify_hardware().
Use sunmon_abort() in cpu_reboot() for now...
1997-04-25 18:52:11 +00:00
9ae1b69554
Rename "Idle" to "_Idle" so clock.c can reference it.
1997-04-25 18:48:39 +00:00
25d7b6b348
Provide a struct representing only the clock.
1997-04-25 18:47:41 +00:00
885a1fc439
Add /dev/leds support.
1997-04-25 18:46:10 +00:00
2dd63e3378
Use bus_mapin, and minor tweaks.
1997-04-25 18:45:39 +00:00
f7749f47fe
Add "oclock" support for the Sun3/470.
1997-04-25 18:31:37 +00:00
8f9276c727
Move the _verify_hardware() work into machdep.c:identifycpu().
...
Call obio_init() after _vm_init() so we can use peek_byte() to
probe the idprom. Be quiet in _save_symtab() when all is well.
1997-04-25 18:29:58 +00:00
b41693a034
Moved bus_scan() and bus_print() from here to bus_subr.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:07:36 +00:00
477a320277
Moved bus_scan() and bus_print() here from autoconf.c
...
because they are now different in sun3 vs sun3x.
1997-04-25 18:02:47 +00:00
3619a4da3d
Rename obio_alloc to obio_mapin, update *_init declarations.
...
Remove OBIO_P4_REG (not a fixed address, but per-device).
1997-04-25 18:00:49 +00:00
963c410824
Change the OBIO address probe order a little, to allow determination of
...
which kind of idprom and clock we have (3/80 vs 3/470 differences).
Fix a bug where obio_submatch() failed to copy some locators.
Rename obio_alloc to obio_mapin. Add lots of comments.
1997-04-25 15:35:27 +00:00
48fa8154e7
Adjust for <m68k/m68k/trap_subr.s>
1997-04-25 01:49:05 +00:00
f05b58b229
Use common m68k sigcode.
1997-04-13 02:37:15 +00:00
dcc94a5dd9
Document the flags accepted by the esp driver.
1997-04-12 19:48:00 +00:00
016ccc25a3
This file is obsolete.
1997-04-10 01:18:49 +00:00
a2be180b39
Adjust for new kcore.h
1997-04-09 21:00:35 +00:00
00c04fe742
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:58:33 +00:00
9b8a0b60b7
Pull in m68k/cpu.h to get regdump() prototype
1997-04-09 20:50:03 +00:00
f0085f91af
Adjust for new m68k/kcore.h
1997-04-09 20:49:06 +00:00
4fb277fd75
Use <m68k/m68k/proc_subr.s>
1997-04-09 20:43:52 +00:00
7b5647f03a
regdump() is prototyped in m68k/cpu.h now.
1997-04-09 20:42:25 +00:00
fb4514fe4d
Use <m68k/kcore.h>
1997-04-09 20:40:54 +00:00
378c9b0f3b
Remove redundant file directives
1997-04-09 20:37:17 +00:00
fa9f5b2448
Constants for the p4 register.
1997-04-09 04:50:43 +00:00
3c962bb544
First working version.
1997-04-09 04:49:09 +00:00
b7dd41d4e2
Location of printer port registers for 3/80 was off.
1997-04-09 04:42:25 +00:00
60d41bb34e
Add floppy controller and floppy drive. Also add MS-DOS filesystem for
...
use with floppies. Remove 'SYMTAB_SPACE' now that we have our own
bootloader.
1997-04-09 04:36:56 +00:00
eabfcc3f00
Removed spurrious ``#ifdef ISO''.
1997-04-07 21:26:19 +00:00
b5f838ad77
Add a comment.
1997-04-04 20:48:59 +00:00
ad36b6970e
Add netatalk netisr
1997-04-03 17:25:18 +00:00
0faac5faf2
Back-out the CWD hack...
1997-04-01 23:11:28 +00:00
68755b199e
Physical page status functions pmap_clear_reference()
...
and pmap_clear_modify() weren't testing if the page whose status was being
changed was being managed. This caused kernel panics with X11.
1997-04-01 02:15:33 +00:00
a09110f073
Use <m68k/pcb.h>
1997-03-31 21:35:39 +00:00
b572daa4dc
In-tree GNU ``as'' does not know of 'pmove <reg>,tt0' instruction. Changed
...
instances of this instruction to hardcoded opcode statements. Thanks to
jthorpe for pointing this out.
1997-03-31 02:22:25 +00:00
80631ee3b7
Keep the compile/ directory in the distribution.
1997-03-31 01:23:37 +00:00
2268a2c7eb
Don't allocate mclrefcnt[]; it's dead and gone.
1997-03-27 21:01:52 +00:00
5b48e061ce
cleanup
1997-03-27 00:15:31 +00:00
c29412f1bb
fix a warning
1997-03-26 23:27:12 +00:00
37b247edde
Renames: /dumpconf/cpu_dumpconf/, /boot/cpu_reboot/
1997-03-26 22:42:13 +00:00
71e43d14ab
Move findroot/setroot stuff from configure() to cpu_rootconf().
1997-03-26 22:38:40 +00:00
7b23790667
Add cdev_lpt_init(NPP,pp) for the 3/80
1997-03-26 17:29:10 +00:00
90a79f75fe
Change continue to break in a few places (as suggested by mycroft).
1997-03-24 23:49:39 +00:00
7c0bd080c9
No longer force boothowto=RB_SINGLE|RB_KDB
...
(Yes, it goes multi-user just fine! 8^)
1997-03-24 17:57:12 +00:00
8bec95da2c
Use ${INSTALL} ...
1997-03-24 17:48:19 +00:00
199246e95f
No longer need SYMTAB_SPACE now that sun3x/stand/* works.
...
(Thanks, Jeremy!)
1997-03-24 17:39:04 +00:00
c874276d35
First cut at crashdump support.
1997-03-21 22:46:05 +00:00
4d949455d4
Fixed address for bwtwo framebuffer.
1997-03-21 07:28:36 +00:00
a4b8e33b2b
This needs muli-include protection now.
1997-03-20 16:21:10 +00:00
c3f299a527
Now using dev/ic/ncr53c9x.c
1997-03-20 16:01:36 +00:00
4663c4fa2a
Sync with the sun3 version.
1997-03-18 23:49:07 +00:00
9f13c3afe5
Read the EEPROM once at attach time, then do user I/O on the copy.
...
Make /dev/eeprom support normal "read to EOF" behaviour.
Removed ee_console, ee_get_byte (dead code).
1997-03-18 23:31:59 +00:00
dee24f1082
Moved the _KERNEL declarations to machdep.h
1997-03-18 23:26:38 +00:00
1161fcc583
Add /dev/leds, and allow both that and /dev/eeprom to
...
return EOF when you read to the end of the device.
Garbage collect some dead code after the switch.
1997-03-18 23:21:04 +00:00
c960be72aa
Add /dev/leds (closes PR#2172 from der Mouse)
1997-03-18 22:21:50 +00:00
03c1c9cee0
Fixup dependencies
1997-03-17 20:59:47 +00:00
08f7a407f9
Separate bcopy and copypage stuff from copy.s
1997-03-17 19:46:36 +00:00
d531b1ed42
s/fpu_type/fputype/g
1997-03-17 19:03:11 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
b6f3695cd1
Use <m68k/m68k/support.s>
1997-03-16 11:04:52 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
40b1a6f68b
No longer need to define SUN_BOOTPARAMS
1997-03-14 21:28:38 +00:00
2f598d011a
Sync with sun3 (Trap 1,2,15 handlers)
1997-03-13 20:46:37 +00:00
0fefd47a64
Use arch/m68k/m68k/sig_machdep.c
1997-03-13 20:30:19 +00:00
ee531cb3c9
s/sun3x_/_/ in sun3x_(round|trunc)_(page|seg) macros
1997-03-13 17:40:33 +00:00
f3952a7326
No longer need to override DEFS
1997-03-13 16:19:01 +00:00
032d13fc7d
s/sun3_/_/ in sun3_(round|trunc)_(page|seg) macros
1997-03-13 15:58:49 +00:00
a9bc70551a
Clarify duties of traps 1, 2, 12, 15 for emulations
...
Include <m68k/m68k/sigreturn.s> code.
Add/fix some comments...
1997-03-11 22:58:57 +00:00
4756c63625
Call isr_soft_request() at most once per zshard interrupt.
...
In the softintr, raise to spltty before calling tty code.
1997-03-11 21:54:35 +00:00
05a47d22ea
Correct handling for Trap #2 in SunOS executables,
...
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
1997-03-11 21:30:51 +00:00
f64034e8f6
Sync up with changes in GENERIC
1997-03-11 21:21:49 +00:00
b4de41ef34
Update the description of the flags for "si" devices.
...
Remove wired-down scsi disk targets (no longer needed).
Add ch, ss, uk (scsi devcies) at mycroft's requst.
1997-03-11 20:59:10 +00:00
3aa49c4b33
Remove unnecessary differences (T_BRKPT, T_WATCHPOINT gone).
1997-03-11 20:31:20 +00:00
ec6bb1d018
s/-T/-Ttext/
1997-03-11 20:13:20 +00:00
4ad7ed0b97
Moved dev_net.[ch] to sys/lib/libsa
1997-03-11 18:29:30 +00:00
d0a45ab470
Use the macros sc_if, sc_addr to avoid lots of references to sc_arpcom.
1997-03-10 21:45:01 +00:00
51cfd7ed4d
Get the numbers of kernel MMU tables right.
1997-03-06 05:16:34 +00:00
9a79f92460
Clean out some junk I forgot to remove last time...
1997-03-06 00:15:56 +00:00
a4e5a18b63
Add pmap_bootstrap_setprom() with sets the PROM level-A tables to
...
allow the PROM monitor to see mappings in kernel space. This also
fixes a problem with exiting to the monitor with the stack pointer
set to some place in kernel space. Also fix NUM_KERN_PTES, and
change get_pte() so it works on any virtual address.
1997-03-06 00:04:18 +00:00
3ca8e4699d
Add pmap_bootstrap_setprom
1997-03-05 23:55:54 +00:00
201bc0aa96
Add ptest_addr
1997-03-05 23:54:08 +00:00
da2622290c
Allow access to the PROM via /dev/kmem (like the sparc port)
1997-03-05 23:02:29 +00:00
63221bf3b2
Fix race conditions that allowed the interrupt latch register to have
...
the wrong value. Now using the <m68k/asm_single.h> stuff from Leo.
1997-03-05 22:22:11 +00:00
eac582d36e
Do some of the clock init a little later, in clock_attach.
...
(plus some other mostly cosmetic cleanup)
1997-03-05 19:00:07 +00:00
88bf00b5bf
No need to block out ZS interrupts in clock_intr() as long as
...
we are careful to use the single_inst_* macros.
1997-03-05 00:01:13 +00:00
9587adc460
Fix race conditions that allowed the interrupt latch register to have
...
the wrong value. Now using the <m68k/asm_single.h> stuff from Leo.
1997-03-04 23:37:48 +00:00
7c5b45aead
Fix a warning.
1997-03-04 22:20:04 +00:00
c03be2ad19
Add declaration for isbad().
1997-03-04 21:59:08 +00:00
67f52ad8a0
Reinstate "isbad" which is used by the xd and xy drivers.
1997-03-04 19:33:23 +00:00
c0b46da054
Use IOMMU_PAGE_SIZE instead of NBPG, since theoretically the IOMMU page size
...
is different than the CPU page size.
1997-03-03 06:51:42 +00:00
290f55615a
Took switch statement out of main loop in pmap_protect() and explained more
...
of the rationale behind it.
1997-03-02 07:59:21 +00:00
8e9324f653
Allow access to the PROM via /dev/kmem (like the sparc port)
1997-02-28 22:35:12 +00:00
403bdb83fa
Add xxc_print functions to pass to config_found() instead of NULL.
...
(Thanks to Chris Demetriou suggesting the improvement.)
1997-02-28 21:23:06 +00:00
507bc60404
Define pmap_page_index as a macro.
1997-02-28 19:57:35 +00:00
03ff0a0c9b
Allow pmap_page_index to be a macro (in pmap.h)
...
Make pmap_free_pages() teturn what actually remains
(Thanks to Wolfgang Solfrank for suggesting the fix.)
Fix some typos while I'm here...
1997-02-28 19:55:37 +00:00
58a45b478c
Remove a diagnostic check in sunmon_reboot broke reboot on the sun3.
1997-02-28 19:47:15 +00:00
1354ca2916
Get rid of some printf noise.
1997-02-28 17:17:22 +00:00
4d534f3d52
Define VM_MAX_KERNEL_ADDRESS using KERN_END instead of a constant.
1997-02-27 18:22:53 +00:00
9b75e011ab
Allow option MCLSHIFT=x to control MCLBYTES etc.
1997-02-27 18:12:38 +00:00
07b4e45308
Allow per-target control over disconnect/reselect.
1997-02-26 22:26:00 +00:00
bb9cc8ad2b
Use ALIGNBYTES in the new ALIGNED_POINTER macro.
...
(That is always good enough on the m68k.)
1997-02-26 20:36:13 +00:00
3435c699a5
Add ch, fd, ss, tun, uk
...
Add cdev for md
Add lkm slots
1997-02-25 01:15:01 +00:00
115b6d92fa
Define ALIGNED_POINTER
1997-02-24 23:16:53 +00:00
ae70fb71ec
No need for dma_cd, so move it into the #if 0 section too.
1997-02-24 15:02:23 +00:00
1c79e9f83d
The first GENERIC config for sun3x. Includes new esp driver.
1997-02-24 03:53:52 +00:00
ad9700fa62
Initial import from SPARC port.
1997-02-24 01:45:13 +00:00
202a9fe423
Added some more comments and disabled removal of DVMA alias mapping from
...
kernel space in dvma_mapout() as it may cause problems with the current
pmap_remove().
1997-02-24 01:37:52 +00:00
689b14f477
Get rid of inclusion of pmap_pvt.h and use the standard pmap functions for
...
mapping.
1997-02-24 01:35:33 +00:00
eb84168030
Suport size=4 in bus_peek(), and clean out some junk.
1997-02-22 19:27:18 +00:00
0b6a4ac7bb
Make the device attach output look more like the SPARC iommu.
1997-02-22 04:02:39 +00:00
d6034ecf66
Add page size constant, since I/O mapper page size may differ from cpu page
...
size.
1997-02-22 04:01:04 +00:00
996c634929
Rewrite pmap_remove() to be speedier with large address spaces.
1997-02-22 03:18:30 +00:00
900bc3f621
Add OBIO_EMULEX_SCSI, and some comments about attach order.
1997-02-21 20:33:09 +00:00
043293d2da
Added the '@' symbols that GAS needs for address register indirect addressing
...
statements that are used when PMAP_DEBUG is undefined.
1997-02-20 00:54:21 +00:00
c14237282d
Make this use sys/dev/clock_subr.[ch]
1997-02-19 23:38:46 +00:00
2e84cacf02
Add dev/clock_subr.c
1997-02-19 23:36:38 +00:00
b76d5979d8
Make this use sys/dev/clock_subr.[ch]
1997-02-19 23:35:02 +00:00
69da16abc9
Need to define M68020 for copy.s
...
Add PM_CTXNUM, tweak...
1997-02-19 16:02:59 +00:00
1b7813bc35
Just M68030 is enough.
1997-02-19 15:59:21 +00:00
eb8bfe4829
Forgot the quotes (slow down...)
1997-02-19 15:55:33 +00:00
62bb836d73
Oops... need to define M68020 for copy.s
1997-02-19 15:54:26 +00:00
035b20b171
Update copyright and fix typos in macro definition used when not debugging.
1997-02-19 04:17:32 +00:00
7e74608bf9
Get the screen size right on the 3/260 (Fixes PR#2402)
1997-02-19 00:22:40 +00:00
8b7e154aab
Oh... can not set cold=0 before swapconf() is done with any I/O
...
that might cause a call to sleep (procinit not done yet).
1997-02-19 00:20:52 +00:00
5f501028f6
No longer need pm_stats
1997-02-18 21:21:11 +00:00
9ed330d6df
Add pmap_wired_count()
1997-02-18 20:18:56 +00:00
12fdd0800f
Add pmap_wired_pages()
1997-02-18 20:16:54 +00:00
3480f70835
Set kgdb_debug_panic if we connect to gdb.
1997-02-18 16:09:59 +00:00
d2a3410f0c
Moved straytrap() to trap.c (and minor cleanup)
1997-02-18 15:53:15 +00:00
c1699a0c88
Add a debug helper for detecting recursive kernel-mode traps.
...
Move straytrap() here from machdep.c
1997-02-18 15:37:57 +00:00
e61bb6f903
Define "cold" over in autoconf.c
1997-02-18 15:30:01 +00:00
626bde2f9b
Add bus_subr.c
1997-02-18 15:10:40 +00:00
1af5733370
New implementation of the findroot/setroot business. Eliminates
...
dependency on wired-down SCSI target/LUN for boot devices.
1997-02-18 15:07:29 +00:00
201c1f178e
Move bus_peek(), bus_mapin() here from autoconf.c so the latter
...
may be shared with the sun3 port.
1997-02-18 14:58:32 +00:00
48da5b3d44
Move bus_peek(), bus_mapin() here from autoconf.c so the latter
...
may be shared with the sun3x port.
1997-02-18 14:57:41 +00:00
7190ad9936
Fix a major bug in pmap_remove_kernel() that causd the removal of
...
one page too many (worse, it unmapped our stack page... Ouch!)
Also, use loadcrp() and such instead of calling pmap_activate
in various places so we have more control over TLB flush.
Now pmap_activate() is called only by locore (and that call is
done only if PMAP_DEBUG is defined). Other minor clean-up...
1997-02-16 19:38:08 +00:00
2053794556
Add sun3/regdump.c
1997-02-14 20:10:50 +00:00
ae0ec6bc84
Moved regdump() and friends to sun3/regdump.c
1997-02-14 20:09:14 +00:00
f01121ece4
Moved sendsig(), sys_sigreturn() to sun3/sig_machdep.c
...
Moved regdump() and friends to sun3/regdump.c
1997-02-14 20:00:51 +00:00
780e636b2d
Pull regdump() out of machdep.c and correct a problem where it
...
would try to print things that are beyond the end of the stack.
1997-02-14 19:55:18 +00:00
7275a8976f
Add pmap_count(), fix some bugs... (from Jeremy).
1997-02-14 03:56:49 +00:00
dc9ad25881
Define pmap_resident_count(), pmap_wired_count() as
...
macros that call pmap_count(). (from Jeremy).
1997-02-14 03:55:33 +00:00
fb373dd41e
Add sun3/sig_machdep.c
1997-02-13 22:21:22 +00:00
905e296504
Moved sendsig() and sys_sigreturn() to sig_machdep.c
...
Rename some trapframe variables for consistency.
1997-02-13 22:16:53 +00:00
91c7291256
Move sendsig() and sys_sigreturn() from machdep.c to here.
...
Should probably move to m68k/m68k eventually...
1997-02-13 22:04:03 +00:00
443faad4e1
Reorganize/simplify the way the memory layout is done.
...
Update to the latest sys/dev/isa/if_ie.c (new ieget).
1997-02-13 20:48:36 +00:00
5997a69a3e
Tune MXFRAMES and MXFRAMES down a little.
...
Reorganize the softc for convenience in ddb.
1997-02-13 20:43:18 +00:00
6a83772a4e
Replace caddr_t with u_int in device structs.
...
Reduce MAXMCAST by a few to be safe.
1997-02-13 20:40:11 +00:00
45ff882a54
Replace sun3/kgdb_stub.c with sun3/kgdb_machdep.c
1997-02-13 18:14:31 +00:00
8869e895a8
Convert meaningless '0' into a more human readable 'IOMMU_PDE_DT_INVALID'.
1997-02-13 07:38:21 +00:00
27b8c79679
Latest version from Jeremy. Changes too numerous to describe here.
1997-02-12 23:09:32 +00:00
c4fa121f14
Reinstate call to pmap_activate() for now, because it is helpful
...
for debugging the pmap code. The in-line version of the same is
still here and will be used if PMAP_DEBUG is not defined.
1997-02-12 23:06:27 +00:00
3476b1d4a4
Adapt to changes in pmap.h
1997-02-12 23:03:14 +00:00
bb35ee4ae8
In struct pmap, replace pm_mmucrp with pm_a_phys.
...
Define pmap_resident_count(), pmap_wired_count()
to call pmap_resident_pages(), pmap_wired_pages()
respectively, so we can keep those statistics on
lower-level structures instead of here.
1997-02-12 23:01:28 +00:00
6cb54de668
Avoid dereferencing null curproc in dumpmem().
1997-02-12 16:06:18 +00:00
bb7dc881a3
Force RB_SINGLE for now (in addition to RB_KDB).
1997-02-12 16:04:33 +00:00
05a09b938e
Must convert from/to BCD when reading/writing the clock chip.
1997-02-12 16:00:31 +00:00
20c8082e79
Now using <kern/kgdb_stub.c>
1997-02-12 01:32:39 +00:00
9b3ad7dd7e
Now using <sys/kgdb.h>
1997-02-12 01:30:36 +00:00
292e8e784f
The KGDB include is now <sys/kgdb.h>
...
Add the kgdb_recover trick.
1997-02-12 01:10:21 +00:00
a4b09086fe
Actually works now!
1997-02-12 01:07:56 +00:00
cfb896375f
Machine-dependent part of the KGDB remote "stub"
1997-02-12 01:03:20 +00:00
6ef591a70b
Add a few more coments. (i.e. why init a6=0)
1997-02-11 19:06:08 +00:00
f914f723de
Add NBPG
1997-02-11 19:02:30 +00:00
9536056d54
Fix some comments
1997-02-11 18:59:23 +00:00
7bd7620f61
Sync with sun3.
1997-02-11 00:56:08 +00:00
aebbe3f083
Change most occurrences of "struct frame" (union of all frames formats)
...
to "struct trapframe" (the minimal frame) because in most cases, all we
care about is the minimal, invariant part. Further, if the declaration
says we have an arg of type "frame" (big union), then KGDB will try to
print the whole bloody thing out whether you want to see it or not.
1997-02-11 00:18:25 +00:00
f13b3f57fd
This is obsolete (and has been for a while)
1997-02-11 00:10:35 +00:00
2bdded1c83
Move the logic about entering the kernel debugger (whichever one) to
...
trap.c:trap_kdebug() so it can be C code instead of assembly.
Make sure the initial frame pointer is zero so KGDB will know when to
stop trying to follow frame pointers during backtrace.
1997-02-11 00:05:01 +00:00
1e0e399b63
Change most occurrences of "struct frame" (union of all frames formats)
...
to "struct trapframe" (the minimal frame) because in most cases, all we
care about is the minimal, invariant part. Further, if the declaration
says we have an arg of type "frame" (big union), then KGDB will try to
print the whole bloody thing out whether you want to see it or not.
Also add the function trap_kdebug() which takes care of calling one of:
kgdb_trap (for KGDB), or kdb_trap, (for DDB) or the Sun PROM monitor.
This logic used to be in locore, but it is better as C code.
1997-02-11 00:01:15 +00:00
4bcf6b565f
Change most occurrences of "struct frame" (union of all frames formats)
...
to "struct trapframe" (the minimal frame) because in most cases, all we
care about is the minimal, invariant part. Further, if the declaration
says we have an arg of type "frame" (big union), then KGDB will try to
print the whole bloody thing out whether you want to see it or not.
1997-02-10 23:57:34 +00:00
569d97a2f9
Save/restore the monitor "v" command handler.
1997-02-10 23:44:23 +00:00
b31965da5a
Set cputype,mmutype at compile-time.
1997-02-10 23:42:05 +00:00
b7d7f667f3
minor nit in bounds_check_with_label()
1997-02-10 23:40:24 +00:00
c70de0b625
Actually works now.
1997-02-10 23:36:09 +00:00
2f46cb47e2
update comments
1997-02-10 23:35:27 +00:00
dfddf9c39b
Actually works now.
1997-02-10 23:34:38 +00:00
f55c7652b7
Export zs_get_chan_addr() for zs_kgdb.c
...
Print the "console on ..." in cninit(), and
avoid reference to kbd/kd drivers if NKBD==0
1997-02-10 23:29:52 +00:00
196f91101a
Make some more things static, and cosmetic stuff.
1997-02-10 23:26:21 +00:00
9f9e8281e0
Add zs_get_chan_addr(), zs_kgdb_init()
1997-02-10 23:24:18 +00:00
7ceee3c729
Add -fno-defer-pop to COPTS (helps ddb backtrace).
...
Add AFLAGS=-m68020 and use it with ${AS} commands.
Depend kgdb_stub.o on Makefile (KGDBDEV, KGDBRATE).
1997-02-10 19:23:41 +00:00
a5b114c665
Forgot to initialize cn->cn_dev, cn->cn_pri
1997-02-10 19:11:12 +00:00
60d4782469
Get rid of HOSTED_CC.
1997-02-07 22:55:44 +00:00
ca11ffdfae
Kill a type-cast.
1997-02-05 17:44:59 +00:00
b4f4d97d22
s/romp/romVectorPtr/
1997-02-05 17:39:21 +00:00
84fad0db28
include <machine/pte.h>
1997-02-05 17:33:46 +00:00
699e513ced
Add -Dsun3
1997-02-05 17:31:46 +00:00
8b6cbcf45c
sync with the sun3x version
1997-02-05 14:51:23 +00:00
c0b220738c
change :: to :
1997-02-04 17:15:38 +00:00
19d153fc48
Nuke some options GENERIC residue.
1997-02-04 04:57:10 +00:00
0b3a46d6b3
Nuke some GENERIC residue.
1997-02-04 04:31:55 +00:00
d372229de2
This little awk program translates the initialized data table found
...
in the assembly file genassym.s into the usual assym.h file. The
assym.h file generated this way is identical to the output generated
if I simply compile and run the genassym.s file. "Heh, Kewl!"
Thanks to Matthias Pfaller for the "translate the .s file" idea!
1997-02-03 21:31:17 +00:00
165a7a3eeb
Put all the name/value pairs in an initialized array of structures
...
so that this can be compiled to assembly code and then translated
directly into assym.h by a simple awk program (genassym.awk).
This program can still be run the old way for verification.
1997-02-03 19:31:44 +00:00
8501929f45
Use copypage() and zeropage() in the right places.
1997-02-02 08:41:10 +00:00
adcdf4cc59
zeropage -> devzeropage, and make it static.
1997-02-02 08:39:55 +00:00
8d00d8cb60
Remove an un-true comment.
1997-02-02 08:38:51 +00:00
95e30218f2
Declare and set cputype and mmutype.
1997-02-02 08:36:39 +00:00
109700d828
Use copypage() and zeropage() in the right places.
1997-02-02 08:35:27 +00:00
2bde56ef38
zeropage -> devzeropage, and make it static.
1997-02-02 08:34:16 +00:00
3af641fa98
Remove an untrue comment.
1997-02-02 08:33:11 +00:00
186a6ad683
Add include <machine/mon.h> so this compiles, etc.
1997-01-31 22:33:47 +00:00
739819c9ba
Adopt for new file system and root spec grammar.
1997-01-31 06:05:14 +00:00
739f23a219
This file is obsolete; this information is now generated by config(8).
1997-01-31 05:12:49 +00:00
bb87691950
Use new machine-independent setroot().
1997-01-31 02:08:50 +00:00
95380a8478
Adopt for new file system and root spec grammar.
1997-01-31 02:08:19 +00:00
d9267b93fd
Forgot to initialize cs->cs_rr0_dcd and fiends in attach.
1997-01-31 00:07:06 +00:00
3cf095df8d
The sunmon_* declarations are now in machdep.h
1997-01-27 22:55:07 +00:00
5f1abbe73b
Add OBIO_EMULEX_SCSI
1997-01-27 22:42:44 +00:00
2e2e2a855c
Change "machdep.h" to <machine/machdep.h>
1997-01-27 22:33:34 +00:00
8fddc5d688
Kill sunmon.h
1997-01-27 22:24:03 +00:00
0352f52a7a
Kill sunmon.h; add sun "code names" (Hydra, Pegasus).
1997-01-27 22:22:51 +00:00
21da6a34c0
Add machdep.h; use sunmon_abort() instead of mon_exit_to_mon().
1997-01-27 22:16:37 +00:00
39d7966a63
Kill sunmon.h
1997-01-27 22:15:06 +00:00
46cb437677
Nuke sunmon.h, add machdep.h
1997-01-27 21:57:44 +00:00
cdac61715c
Just declare the sunmon_* functions here. No need for sunmon.h
1997-01-27 21:48:37 +00:00
9d2ab17c95
Include <sun3/sun3/vector.h>
1997-01-27 20:54:14 +00:00
ca8e9852d2
Use sunmon_abort() instead of mon_panic(), etc.
1997-01-27 20:50:36 +00:00
c8b0ad744c
Changed "machdep.h" to <machine/machdep.h>
1997-01-27 20:43:51 +00:00
feaca6a0df
Let idprom_init() have void return.
1997-01-27 20:36:50 +00:00
9b52402303
Use sunmon_abort() instead of mon_panic()
...
Let idprom_init() have void return.
1997-01-27 20:35:58 +00:00
0942e69a7b
Let bus_mapin() return void *; moved machdep.h
1997-01-27 19:56:33 +00:00
ced023ffd8
Let bus_mapin() return void *
1997-01-27 19:54:53 +00:00
f8d04bcffb
Update comment about si_obio_options
1997-01-27 19:54:06 +00:00
340699a2b1
Fix copyrights (/s/REGENTS/FOUNDATION/)
1997-01-27 19:40:46 +00:00
8e207f0cda
Eliminate reference to "romp" macro. Moved machdep.h, Fix copyright.
1997-01-27 19:19:59 +00:00
ded84699df
Use stuff from <sun3/sun3/sunmon.h>
...
Setup the msgbufp here like others.
Do vm_map_protect() on kernel text.
1997-01-27 17:45:50 +00:00
13cb0851cb
Implement _pmap_fault() (does the VA check and calls pmap_fault_reload).
...
Correct VA range checks in pmap_protect and elsewhere (lower limit of
kernel VA for our purposes is virtual_avail, not VM_MIN_KERNEL_ADDRESS).
Make pmap_activate flush the cache (only if needed). Fix copyright.
1997-01-27 17:23:31 +00:00
a2bebc4a6b
Sync. with the sun3x version (now the same, so sun3x can use this).
...
Update exframesize[] array from hp300, comments, misc. cleanup, etc.
Replace machine-dependent section that called pmap_fault_reload()
with a simple call to the new _pmap_fault() macro which does any
of that MD stuff that might be necessary.
1997-01-27 17:19:22 +00:00
39258ec971
Remove code that is now in sun3/sunmon.c (shared with sun3x)
...
Rename some functions (remove sun3 prefix). Fix copyright.
1997-01-27 17:14:34 +00:00
fe9fba89df
Rename some of the sun3-specific things to be closer to the sun3x version.
...
Call pmap_activate with just one arg (the pmap), and do the cache flush
in there (if needed).
1997-01-27 17:11:36 +00:00
65e048e41c
Reorder to be somewhat more "top-down" (cosmetic).
...
Fix copyright.
1997-01-27 17:04:12 +00:00
e22c9eba99
Remove unused PMAP_ACTIVATE/PMAP_DEACTIVATE macros.
...
Add new _pmap_fault macro used in trap.c
Declare pmap_activate() correctly.
1997-01-27 17:02:14 +00:00
741b72ec69
Pull out things now declared elsewhere.
1997-01-27 16:58:59 +00:00
dff67a76a8
Map regs using sizeof(struct lereg1) instead of OBIO_AMD_ETHER_SIZE.
...
Also fix copyright (s/REGENTS/FOUNDATION/)
1997-01-27 16:57:12 +00:00
4618767f94
Add sun3/sunmon.c (also kill trailing spaces)
1997-01-27 16:11:11 +00:00
c19546380b
Check interrupt_reg==0, not clock_va (Oops!)
1997-01-26 06:17:07 +00:00
b805b73cbe
Use sunmon_abort() instead of mon_panic().
1997-01-25 21:47:44 +00:00
b224329ecd
Just return if clock_va is not set.
...
Use <sun3/sun3/sunmon.h> for abort.
1997-01-25 21:46:19 +00:00
8d9bb0e996
Use <machine/machdep.h>
1997-01-24 00:09:34 +00:00
f13a8dfcb5
Use <sun3/sun3/sunmon.h>
1997-01-23 23:58:05 +00:00
a4a29b13a7
Use <machine/machdep.h>
1997-01-23 23:54:26 +00:00
c0170a476f
Use <machine/machdep.h> and <sun3/sun3/sunmon.h>
1997-01-23 22:48:40 +00:00
d33b4cd423
Load the root pointer using VM_PMAP_MMUCRP
...
Also rename nodb_trap to _nodb_trap
1997-01-23 22:47:36 +00:00
73234aa5f6
Use <machine/machdep.h>
1997-01-23 22:44:43 +00:00
04f1ba99a2
Remove PCB_MMUCRP, add VM_PMAP_MMUCRP and VM_PMAP_A_TMGR
1997-01-23 22:40:38 +00:00
12e2d4d8f7
Replace the intersil7170 stuff with mostek48t02 stuff.
...
XXX: Still need to move date conversion functions to
XXX: libkern or somewhere...
1997-01-23 22:30:15 +00:00
8b175f2050
Move a bunch of stuff to sun3/sunmon.c where we can share it.
1997-01-23 22:27:29 +00:00
06655500a0
Wrap prototypes with ifdef _KERNEL
1997-01-23 22:25:56 +00:00
f91c597e92
Add <machine/pte.h> and the new pm_mmucrp member of struct pmap.
...
Kill macros PMAP_ACTIVATE and PMAP_ACTIVATE (not used).
Add macro _pmap_fault for use in trap.c
1997-01-23 22:24:04 +00:00
05bbc1f7ee
Rename members of struct mmu_rootptr, and add a comment. (From Jeremy)
1997-01-23 22:15:41 +00:00
d0ba6f78a0
Fixed leap year bug. (Doesn't happen until 2100, but still important.)
1997-01-23 04:13:39 +00:00
gwr