baa1e576e4
Make it easier to comment out single targets/floppies.
2000-05-10 23:44:51 +00:00
873c2fbd93
Build bootfloppy-small, as a 1.44MB floppy image.
2000-05-06 05:32:28 +00:00
48b5b5f82c
Build bootfloppy-tiny again.
2000-05-05 21:37:05 +00:00
b0afa4ef98
Need BLOCK8K now.
2000-05-05 21:35:51 +00:00
819afb8af2
Switch to using ustarfs. Saves space, and allows us to truncate the image if
...
it's smaller than the media (e.g. boot-big.fs).
2000-05-05 21:34:32 +00:00
23873a5473
GC some unused stuff.
2000-05-05 21:25:58 +00:00
21d295469d
Minor cleanup in previous.
2000-05-05 21:08:01 +00:00
0992b5f229
Make this capable of generating a single-floppy image.
2000-05-05 21:01:35 +00:00
00975f989f
Merge latest build system changes, and use the kernels built in ramdisk-kernel.
2000-05-05 20:13:29 +00:00
64228ba734
Build in ramdisk-kernel.
2000-05-05 19:30:13 +00:00
7080cedad4
Makefile to build and install the ramdisk kernels, separately from the boot
...
floppy images.
2000-05-05 19:29:28 +00:00
057045f8bf
Add commented-out BOOTCODE setting for bootfloppies with output to
...
serial console.
2000-05-04 14:12:13 +00:00
1f724b9392
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.
2000-05-02 16:06:45 +00:00
59c8861b20
Disable building of bootfloppy-tiny for now since we don't fit.
2000-04-23 15:05:02 +00:00
1613a87db4
Change how ramdisk is sized so we can actually use more than 1.44mb of
...
space.
Adjust RAMDISKCYLS and/or RAMDISKSPC to change the ramdisk geometry.
the total blocks on the ramdisk is computed automagically from this.
2000-04-23 15:04:25 +00:00
04b675c7a2
Provide a Makefile here so that the previous level will traverse down.
2000-04-07 17:44:19 +00:00
63b3c394ac
More inodes.
2000-03-16 14:56:19 +00:00
89e842a822
mbrlabel moves to /sbin.
2000-03-15 12:16:36 +00:00
d128de6bc6
Change miniroot size to 3072.
2000-02-27 20:26:07 +00:00
5d16084a1d
Don't try to remove old /boot after new one is installed.
...
Actually, we don't need to remove it since we are using fresh image.
2000-02-18 02:50:17 +00:00
a9d4a72b25
Revert STRIPPROG -> STRIP
2000-02-01 05:02:31 +00:00
9cd2b045d3
Make these work again.
2000-01-24 17:52:24 +00:00
1bf52b391d
rename (revert) memory disk filename /dev/mdX -> /dev/mdXa
2000-01-21 12:32:54 +00:00
bdfb1f79c9
STRIP -> STRIPPROG
2000-01-19 16:40:10 +00:00
e6824489b4
Fix root device name md0a -> md0
2000-01-10 05:03:24 +00:00
8cb34890e1
bring in ping6 and rtsol into boot floppy image.
2000-01-04 08:30:24 +00:00
6aa45a8fe1
use mtree -U, not mtree -u.
...
re-enable error code check (remove "-" magic from makefile).
From: Hubert Feyrer <feyrer@rfhs8012.fh-regensburg.de>
Message-ID: <Pine.GSO.4.05.10001020308490.20750-100000@rfhs8036>
2000-01-02 13:59:34 +00:00
ba694ff21c
i'm not sure why, but without ignoring mtree error (error code 2)
...
i can't build floppy at all. hope this is not my pilot error.
1999-12-31 18:34:04 +00:00
1d729cc2a3
avoid libipsec.a by using x_ping instead of ping.
1999-12-31 18:33:25 +00:00
2e3036aadb
Remove update from the miniroot lists.
1999-11-23 23:16:02 +00:00
71efc75854
Don't start update.
1999-11-23 22:43:20 +00:00
1b411c7a86
Remove update from all ramdisks.
1999-11-23 22:14:22 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
b4548e6710
remove obsolete file
1999-10-25 16:44:53 +00:00
d449004e6a
Add shell functions for grep and dmesg.
1999-09-27 02:47:58 +00:00
b58be766cb
add rcmd; there are no other tools that let the user remotely execute
...
commands.
1999-09-07 06:54:21 +00:00
d4a5c0f7ec
Add wiconfig(8), needed for installs over wawelan networks.
1999-08-12 15:34:19 +00:00
001e4d5767
add -lbz2; also sort the libraries properly.
1999-07-26 08:07:30 +00:00
b663bdb63e
Need -lipsec now, for ping.
1999-07-05 08:52:49 +00:00
5421c40146
Strip the kernel. Nothing on the bootfloppy uses them (except DDB, but
...
that's rare), and currently it's likely that you need to seek back
in the bootprocess to get the symbols, confusing ustarfs.
1999-07-02 22:00:17 +00:00
7aa73e55cb
after checking and setting DONEPROFILE, export it so that children of the
...
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.
1999-06-26 06:12:49 +00:00
457a67e5f9
Increase the number of inodes.
1999-06-09 01:45:28 +00:00
f10be91eae
Ops, remove debug code added with previous commmit.
1999-06-05 20:44:57 +00:00
90d35fd201
Generate the /dist/obsolete_* files used by sysinst from the obsolete lists
...
in sets/lists/*. The sript sets/makeobsolete concatenates the mi and md
obsolete list files all or a specified set and dumps it in a file, in a
subdir specified on the command line (inspired from the maketar and makeflist
files).
Use this for all the sysinst-based installs.
Untested for non-i386, and the md obsolete list may be wrong or incomplete.
Each postmaster is supposed to check this on his port.
1999-06-05 20:17:38 +00:00
2f3417d997
Fix listfiles to handle object directories. Patches supplied by
...
Izumi Tsutsui in PR misc/7628.
1999-05-23 07:31:19 +00:00
dfa799a037
Sync with the recent crunchgen changes.
...
- Remove *.cro files and not the obsoleted *.lo files.
From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.
1999-05-11 20:46:58 +00:00
b84e78c664
Add mount_ntfs
1999-05-06 17:13:08 +00:00
6f626b2c13
Add dist/*_obsolete files, used by sysinst. These files have been manually
...
generated from distrib/sets/lists/*/obsolete{mi,i386} files. A better
way to get them should be found ...
1999-04-19 23:55:28 +00:00
5da713368c
Add mbr_bootsel.
1999-04-15 22:41:24 +00:00
cd79d7d899
move pwd_mkdb earlier to avoid bumping our head on disk image size.
1999-03-30 08:03:42 +00:00
a9ddfb696d
allow to set location of INSTALL kernel from command line so that
...
bootfloppies can be built with r/o /usr/src or with other kernels
1999-03-23 18:10:57 +00:00
ccb094136e
find "mdsetimage" in ${DESTDIR}
1999-03-23 18:05:45 +00:00
5d25794ed2
Rearrange progs slightly to split up MI and MD specs.
1999-03-22 08:59:33 +00:00
83636f9dde
Since we include EXT2FS in the kernel, we should have mount_ext2fs too.
1999-03-17 23:32:33 +00:00
0cc83570fc
Reenable gzip symlink, pax uses it.
1999-03-16 20:17:14 +00:00
2d2e8be23c
Temporarily back out the libhack version of gethostby* as it's *too* small.
1999-03-14 03:29:06 +00:00
6a5409ffe2
Update comment about newfs parameters for 1.44M disks
...
(and make it clear they're not going to get better)
1999-03-13 21:43:34 +00:00
72b3c2be3c
Shrink ramdiskbin by ~184K.
...
- use libhack to avoid dragging in YP and DB (saves about 108K of libc
we have no need for).
- use more of the -DSMALL utils from distrib/utils/x_* (saves about 76K)
(except x_gzip, which is actually bigger).
People who want to be able to install files which have been translated
into EBCDIC, or install over XNS, can probably figure out other ways
to get this done.
This means that a boot image again fits on a single 1.44M floppy, with
about 50k to spare.
1999-03-13 21:21:51 +00:00
2f946a25db
Don't over-reserve space in the tarball for the bootfile; strip the bootblocks
...
(just being used as a "spacer" in the tarball).
1999-03-13 20:44:16 +00:00
d9994f64bd
Copy compressed kernel with miniroot inside to "netbsd" rather than
...
"netbsd.gz". This speeds the boot by a small but perceptable amount.
The time between when the bootblocks print "no such file or directory"
for netbsd and when they show signs of actually having found netbsd.gz
is long enough to be noticeable, and looks bad..
1999-03-13 20:02:32 +00:00
2ccf28fc88
Install bootblocks before the kernel; this speeds the boot slightly as
...
the system doesn't have to seek to the end of the disk and then back
again.
Use gzip -9 to try to squeeze every last bit in.
1999-03-13 19:58:44 +00:00
40b1ba1fb9
Use installboot and bootblocks from DESTDIR
1999-03-13 19:19:03 +00:00
29b70cd215
Use G0 (not G1) for the alternative character set (DEC line graphics).
...
Delete "\E)0" sequences and make ":as=\E(0:ae=\E(B:"
(some terminals use "1" for "0").
This change makes it easy to use 8-bit encodings, such as ISO8859, EUC, etc.
PR #7126 .
1999-03-13 09:03:28 +00:00
d498a2d354
update the list to correspond to the programs which are actually in
...
the ramdiskbin
1999-03-11 06:24:36 +00:00
982ab7b13a
Add termcap.mini, with both pc3 and vt100 terminal types, and use it.
1999-03-09 19:28:54 +00:00
97645818ba
Let's call this image boot-big.fs.
1999-03-08 15:59:34 +00:00
ad140b77ea
Modify all calls to newfs in ramdisk/miniroot creation to include
...
the needed endianism of the architecture. One step towards cross-building
releases.
Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.
1999-03-04 20:32:18 +00:00
e861a305f3
Typo correction.
1999-02-17 12:27:16 +00:00
0c0355cfd9
bootfloppy-big/Makefile creates 2.88M diskette image suitable for CD-ROM boot.
...
(Depends on new disktab from etc/etc.i386/.)
Don't descend into bootfloppy and bootfloppy-small since these now overflow,
now do ramdisk, fdset, bootfloppy-big, and bootfloppy-tiny.
1999-02-01 21:55:31 +00:00
7cf58978a8
Fix clean target too.
1999-02-01 15:13:01 +00:00
135540da2a
Rename boot disk set name from 'disk' to 'boot'.
1999-02-01 14:25:09 +00:00
851ee9e397
1) Remove all vestiges of tar from src/distrib. Use pax and appropriate
...
commandlines for all tar operations. (work supplied by Matt Green)
2) Update arch/*/md.c to deal with new sysinst/run.c. Special case
anything that needs to do a redirect or a pipe.
3) #if 0 some unused code in target.c. This code will need to be updated,
or special cased with do_system.
Big thank you to Matt for all his work on this.
1999-01-25 23:34:20 +00:00
c3262a3841
Use pax instead of tar on the ramdisk bins.. create appropriate link for
...
tar to get tar-like fonctionality.
1999-01-21 07:52:00 +00:00
3726df67b9
set BLOCKSIZE=1k (so df behaves the same as when installed)
...
set EDITOR=ed (otherwise disklabel -e tries to run 'vi')
1999-01-08 04:32:33 +00:00
113bf32fbf
Makefile setup to construct multi-floppy boot using ustarfs.
1998-12-19 19:51:23 +00:00
7c7a3d90e5
Dead.
1998-11-28 02:53:33 +00:00
aaa44058ad
Use MI versions of the dot.commonutils and dot.instutils helper
...
scripts for ramdisk-based script installer (even where commented out).
1998-11-28 02:49:44 +00:00
4b08b00301
Need to pull in <bsd.own.mk> to get preferences set in mk.conf (e.g.
...
OBJMACHINE).
1998-11-27 21:10:10 +00:00
7675f01a71
Add mbrlabel, and make both mbrlabel and swapctl visible in the images.
1998-11-18 18:29:21 +00:00
beb611e886
Add a copy of /usr/mdec/mbr, for the benefit of fdisk.
1998-11-11 18:52:50 +00:00
274d4c2de2
Fixes to the install floppies
...
(from Havard.Eidnes@runit.sintef.no )
1998-10-12 16:32:16 +00:00
06b0ffe181
distclean is a synonym for cleandir
1998-09-05 14:46:13 +00:00
4da46852f5
We don't need to manually flush the buffer cache after ``vnconfig -u''
...
anymore.
1998-01-26 23:50:54 +00:00
3891a64da7
Add $HOME to profiles, closes pr 4323 (from Tatoku Ogaito)
1998-01-09 21:51:25 +00:00
3fe138c146
RCS Id Police.
1998-01-09 08:03:16 +00:00
79227d6edd
Changes to always use new install system; remove old scripts.
1997-12-19 01:03:39 +00:00
66d732b062
remove ${REV} from floppy names per new practice.
1997-11-29 21:18:58 +00:00
99df3ac6f2
Add sysinst as an option in the start menu.
1997-11-05 22:58:22 +00:00
16de89f71a
small (1.2M) bootfloppy Makefile
1997-11-05 19:46:37 +00:00
da801e20c2
Change default bootfloppy to 1.44M, and add a 1.2M "small" bootfloppy.
1997-11-05 03:39:51 +00:00
9298c97b61
Add sysinst to ramdiskbin
...
Move to use init_s to make room for sysinst
(Note: sysinst is not automatically run, it still uses the old install
process. One can choose "shell" and then run sysinst to use it.)
1997-10-17 21:02:34 +00:00
9891493884
mount root ramdisk rw in .profile
1997-08-22 18:23:08 +00:00
945e8578f4
improve the net interface config stuff
1997-08-15 23:03:57 +00:00
417f8e4a63
Fix wrong values for free blocks/inodes versus `bytes per inode'.
1997-08-07 18:09:49 +00:00
6f746d6d8c
Add new variable `INO_BYTES' for the `-i' parameter to `newfs' and set
...
to 204800 instead of 6144. This gives 16k more data space with 61 inodes
left. Variable may be overwritten from command line.
1997-08-07 11:32:00 +00:00
ebbcf2e45f
Add `bin/mt', `sbin/restore' and `sbin/rrestore' so the bootdisk is useable
...
as an emergency disk.
1997-08-06 20:57:57 +00:00
b218474661
In Config(): hostname.XXX -> ifconfig.XXX for new netstart.
1997-08-04 22:33:58 +00:00
7e64b24b2c
Changes to deal with vnds that need to be disklabeled. Using
...
vnd?d for vnconfig and vnd?a for newfs/mount.
1997-07-29 18:07:48 +00:00
ed4c805216
Update for changes to vnconfig(8).
1997-06-23 21:29:50 +00:00
278032974f
Update for changes to vnconfig(8).
1997-06-23 21:18:34 +00:00
712a7863e8
unmount before running installboot so this works on securelevel >1 systems
1997-06-23 01:14:32 +00:00
65650e234d
Make this work with objdirs.
1997-06-21 21:30:49 +00:00
c6bccee655
Get rid of awk. We don't need it any more, and we can use the space
...
better for other things.
1997-06-19 17:28:29 +00:00
4411c926a8
fsck and fsck_ffs are no longer the same program
1997-06-19 16:56:57 +00:00
057693aba6
1) upgrade the boot blocks with installboot, not disklabel!
...
2) always fsck the partitions before mounting. (I even force fsck now,
just to be sure.)
1997-06-18 00:11:28 +00:00
b1eb259787
Make sure the created fstab has a swap partition! Otherwise, in the
...
new world order, you won't have any swap space! Bad!
1997-06-18 00:09:17 +00:00
9a6b119bd8
boot-.fs -> boot.fs
1997-06-17 16:50:00 +00:00
e9faa92a39
add fdisk to install ramdisk
1997-06-15 23:16:33 +00:00
3148c0e429
Initial commit of new single floppy install/upgrade system.
1997-06-14 18:56:00 +00:00
721bf6cb09
obsolete
1997-06-14 18:33:15 +00:00
350f363582
obsolete
1997-06-14 18:30:53 +00:00
56e7a6f2db
fix typos. from Kouichi Matsuda <kmatsuda@elsip.hokudai.ac.jp> in [i386/3454]
1997-05-30 01:34:42 +00:00
681b8b08c7
Add missing REV changes from lukem:
...
>Don't hardcode in the current release information; generate it
>automatically on the fly, by using
> `sh ${BSDSRCDIR}/sys/conf/osrelease.sh -s`
1997-05-11 08:58:56 +00:00
d27d7804f7
Bump the REV to 12D to get in sync with param.h and newvers.sh.
...
This REALLY needs to be in ONE file and not in 11 files.
1997-03-16 11:26:15 +00:00
c1ed71f4c1
Rename image to inst${REV}.fs, for consistency.
1997-03-13 01:44:40 +00:00
d6af1b7d7c
Merge separate kernel-copy floppies back into one. This is a stop-gap
...
measure; the next release will use something Different.
Update version number to 1.2C.
1997-02-18 07:38:15 +00:00
c99082b87b
Bump to 1.2B. We really need to centralize this.
1996-10-26 19:03:47 +00:00
31ea8a8bb2
Bump to 1.2B. We really need to centralize this.
1996-10-25 23:28:44 +00:00
df3c9c2934
Bump revision number to 1.2A so that snapshots of -current will have
...
decent version numbers in them. This should really, really be in a
single file so in the future it only has to be changed in one place
for all distributions and documentation.
1996-10-15 04:39:33 +00:00
f9af6f1e41
Changed *.ccore to *.core. "make clean" now works right again.
1996-10-09 19:16:10 +00:00
34d9f1513d
merge in 1.2 branch
1996-10-09 00:13:36 +00:00
c7a5193440
RCS id police.
1996-08-30 17:32:23 +00:00
4d77d4f9e8
Fix typo: $ -> #
1996-05-14 21:51:41 +00:00
8bdf3233c6
RCS id police.
1996-05-07 18:45:18 +00:00
c917cba930
update to note that fsck no longer exists, that fsck_ffs should be used,
...
and that fsck should be a link to fsck_ffs.
1996-05-02 23:16:57 +00:00
ff483dae6a
Ooops. Fixed the less problem slightly differently. This time it
...
works. It seems the order of the srcdirs line is important. Ought to
find out why.
1996-03-12 04:55:21 +00:00
981bb65cf9
crunchgen list still specified "more" and not "less"; we no longer
...
have a /usr/src/usr.bin/more. Fixed.
1996-03-12 00:40:51 +00:00
36cd716562
merge in changes from 1.1 release branch
1995-11-28 23:56:58 +00:00
9e67db5b49
This should now be OK for the 1.1 release.
1995-10-30 02:25:36 +00:00
440c842348
Oops! Sync with 1.1 changes
1995-10-30 02:14:04 +00:00
9fdd3e5e88
Remove irrelevant 'kc' directory.
1995-10-30 02:09:27 +00:00
c7602440ba
update to match current reality. also, make a "COPYDIR" list entry
...
type, to copy a directory, and clean up "COPY" list entries.
1995-08-14 01:50:20 +00:00
a96982af4a
update to match current reality. also, make a "COPYDIR" list entry
...
type, to copy a directory, and clean up "COPY" list entries.
1995-08-14 01:50:13 +00:00
d2938e5ce1
add mount_ffs
1995-08-13 03:59:10 +00:00
f5abada076
add mount_ffs
1995-08-13 03:59:02 +00:00
f1c676b794
Explicitly remove files before copying or linking.
1995-06-10 20:24:20 +00:00
eec988bcd8
use new crunchgen options
1995-05-12 21:16:03 +00:00
86949e924c
make paths relative, note that halt and reboot are same bin now.
1995-05-12 03:42:57 +00:00
0f27426719
deal with relative life, and note that halt and reboot are marged
1995-05-12 03:33:22 +00:00
20a68de085
only one kc now
1995-05-12 03:27:38 +00:00
4f919ecd87
updated another instance of old vnconfig -u syntax.
1995-05-06 07:03:18 +00:00
f96b90209c
update other instance of old vnconfig syntax
1995-05-06 06:51:12 +00:00
fe87d0399e
Update syntax for vnconfig(8). From Greg Hudson.
1995-04-16 19:11:44 +00:00
d8d462aeea
Update revision number.
1995-04-16 19:11:21 +00:00
fa0f27fb2d
put dd on install & kc disks, as requested by John Kohl in pr 472,
...
and make sure the .o's are made (e.g. after clean), as proposed by
Rafal Boni in pr 493.
1994-10-18 21:21:34 +00:00
a63619a01c
1 floppy drive support
1994-10-18 07:02:52 +00:00
8ef840a019
print reminder about possible disks to load from, wait for return.
1994-10-02 16:07:03 +00:00
464589d6ae
oops!
1994-09-01 03:31:37 +00:00
33e0df2ca3
to hell with it, add an n.
1994-08-31 00:10:42 +00:00
e6a0c0661a
fixes for typos. from Havard Eidnes <Havard.Eidnes@runit.sintef.no>
1994-08-30 23:48:23 +00:00
hubertf