expect those where at least one of the language variants isn't built,
and those that are known not to have enough space (i386 ramdisk-tiny).
Files added to list.sysinst, list.sysinst.en is used when these files
cannot be added.
This might hit a size limit on another build - but I have no (sane) way of
testing it.
DISTRIBVERDEP in Makefile.distrib, and make both sysinst and
distribution notes use that information so that they rebuild
if the kernel version changes.
Distribution notes didn't have this before, sysinst had a private
(now outdated, since sys/sys/param.h now determines version) copy
of this.
* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.
* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices
* Remove /usr/etc from $PATH; not needed anymore.
* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode
* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).
This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)
Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
Change name of target build from xxx.mk from 'all' to xxx.crunched to avoid
picking up baggage from bsd.own.mk and bsd.prog.mk.
Fixes toolchain/21563 (with new crunchgen binary)
Explicitly check times on built targets so to stop make rebuilding
the later targets.
nbmake in src/distrib/i386/floppies/ramdisk-big (etc) will now
pick up changes to source files that make the crunched binary.
64 bit block pointers, extended attribute storage, and a few
other things.
This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.
Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.
to set MAKE for the subshell that's used to populate the work tree.
It needs to be the the correct make (in the cross build case: nbmake +
args) so that when makeobsolete is run it can pickup this value.
Otherwise makeobsolete defaults to the host's make is used which might
not understand some of NetBSD make's constructs.
This fixes, mostly, the build of NetBSD/hpcmips on a FreeBSD-current
system.
character, use that as the path to the kernel to use, rather than
using the default of "${KERNOBJDIR}/${KERNEL}/netbsd".
(Using this feature means that FILENAME == "-" isn't useful. such is life...)
computers, by appending appropriate boot file systems to the image and
then creating a disklabel using sunlabel(8).
Inspired by distrib/utils/mksunbootcd, except that this is a shell script
instead of being a C program that would have needed to become a host tool.
Use /var/db/obsolete instead of /etc/obsolete
etc/Makefile:
Create separate target "install-obsolete-files" to populate
/var/db/obsolete, instead of using "install-etc-files".
Makefile:
Add do-obsolete target, to run "cd etc && make install-obsolete-files",
and add this to BUILDTARGETS.
This moves the "obsolete files" creation from "distribution" to "build".
Per discussion with Andrew Brown.
or the command with an interactive question. (This also prevents
weird problems if a directory element of '-f path' is missing and
'make -j N' is being used).
There's two variables added to Makefile.crunch:
SMALLPROG If 1, add SMALLPROG=1 to CRUNCHENV. [default: 1]
This can be used by various Makefiles to
determine if a `small' version of the program
is required.
SMALLPROG_INET6 If 1 and SMALLPROG == 1, add SMALLPROG_INET6=1
to CRUNCHENV. [default: 0]
This can be used by various Makefiles to
determine if the `small' version has INET6
support enabled.
Only enable SMALLPROG_INET6 for programs on the ramdisks that have INET6 in
the appropriate kernel, and cleanup INET6 setting.
(Note: this means that sysinst won't get INET6 support if the kernel
it's running on doesn't have it).
This change saves a fair bit of space on various install images
(including i386 ramdisk-{ps2,small,tiny}) that didn't have INET6 in
the kernel but were unconditionally getting INET6 support in their tools.
- for COPYDIR, use perms of 0444 for files
- set perm to crunchgen program to 0555
- for mode=populate, add `` || exit 1'' after `` ( ... ) '' to
ensure that sh -e correctly exits upon failure...
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target
rather than the previous ".fs").
- add support for (optional) FLOPPYSUFFIX in Makefile.tarfloppy, and
use appropriately
- remove (now unnecessary) custom release targets in alpha/instkernel/*
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}
MDEXTRA_SUFFIXES.${KERNEL} -> MDSET.${FILENAME}.suffixes
${KERNEL.${_K}}.post -> MDSET.${FILENAME}.post
This allows "default" rules for for MDSETTARGETS with FILENAMEs of "-"
by defined MDSET.-.post & MDSET.-.suffixes
- Document the above
- Use the above appropriately in various Makefiles
- Be a be quieter when building these kernels
- Add .WAIT syncs so that multiple kernels aren't built in parallel, because
the temporary filename is the same, and it also avoid hairy magic in
syncing the targets generated from MDSET.${FILENAME}.suffixes with
the master target for that ${FILENAME}
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename
The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.
- improve comments
- provide a general purpose variable replacement; replace contents of ${FOO}
with ENVIRON["FOO"].
- deprecate @MACHINE@ and @MACHINE_ARCH@ in favour of using ${MACHINE}
and ${MACHINE_ARCH} instead
- add errx() function; like err(), but doesn't print the line number
- invoke this script with various variables defined via PARSELISTENV
*/Makefile*
- use PARSELISTENV instead of POPULATEENV, and add variables like DESTDIR
- other minor tweaks
*/list*
- replace @MACHINE@ with ${MACHINE}
remove dist/*, now that they're not needed.
if MAKEDEVTARGETS is set, use MAKEDEV.wrapper and makedev2spec.awk to
create an mtree specfile containing the devices that would be made with
"etc/etc.${MACHINE}/MAKEDEV $MAKEDEVTARGETS".
otherwise, copy etc/etc.${MACHINE}/MAKEDEV to dev/MAKEDEV (via list.makedev)
- add mtree.common; contains directories used by all images, and optional
entries for dist/*
- add support for passing variables to parselist.awk that are used to replace
text in each line of the lists. currently supported strings:
text variable
---- --------
@MACHINE_ARCH@ MACHINE_ARCH
@MACHINE@ MACHINE
generate list of commands from provided MAKEDEV script with
given arguments, to feed into makedev2spec.awk
makedev2spec.awk
take output of MAKEDEV.wrapper and generate an mtree(8) specfile.
catting these together with "/unset all" between each file.
- when populating the tree (${WORKBUILT} rule), depend upon ${WORKSPEC}
rather than ${MTREECONF}
- support ${MAKEFS_FLAGS} as optional flags for ${MAKEFS}
- use CLEANFILES to remove files
comprising of:
Makefile.crunch
build a crunchgen(1)ed binary from the provided lists
Makefile.image
build a tree from the provided lists, and
build an ffs file system image from that tree using makefs(8),
without requiring root privileges
parselist.awk
parse list files generating different output:
crunchgen config
mtree specfile
sh commands to populate a tree
dsl