4e045b6b43
Take 2 to get the mount order "right", taking care of possible LKM
...
loads before netstart this time.
LKMs can be loaded at 3 strategic places in /etc/rc - before netstart,
before "mount -a" and after all. "before netstart" works only if
the /usr filesystem is local (or on NFS, if root is too).
An additional field ("when") in lkm.conf controls when the LKM is
loaded.
1997-07-14 11:55:44 +00:00
93f2294467
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:29:17 +00:00
91e0832cae
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:16:59 +00:00
a6fe27dced
Back out the last two commits for now till we find a better way to fix
...
the mount problems.
1997-07-11 12:01:06 +00:00
6553fa7064
rc.lkm needs /usr/bin/ld, so try to mount it with -t nonfs before rc.lkm.
1997-07-11 09:06:59 +00:00
ce3196e8dd
Allows root to specify a MAILTO and have the security report mailed to
...
the same user as the daily output. If $USER is not root or MAILTO is
not set, MAILTO is set to root. Closes PR 2409.
1997-07-11 00:36:55 +00:00
d9dfde6362
Mount only "/" at the beginning (instead of all non-NFS filesystems).
...
This makes that the ordering of fstab is used for mounts which is
a) more intuitive and b) needed if {mfs,union,...} on top of NFS
is wanted.
1997-07-10 13:43:14 +00:00
34164c8eea
make toor's shell explicit to shut up /etc/security
1997-07-10 06:38:35 +00:00
0307359cda
Added new device entries for ipfilter: /dev/{ipnat,ipstate,ipauth}
1997-07-07 22:29:35 +00:00
a902cc2ba7
Added a new device entry for ipfilter: /dev/ipauth
1997-07-07 22:26:51 +00:00
ea18ad7974
Run ntalkd as nobody.tty
1997-06-29 19:20:20 +00:00
44de15e66c
Create ./usr/share/man/{cat,man}3/i386; from Anders Hjalmarsson
...
<Anders.Hjalmarsson@economics.gu.se> in PR misc/3794.
1997-06-26 21:20:19 +00:00
650e452081
Before disk checks are performed, do a "swapctl -A -t blk" so that
...
block-type devices are available during disk checks, which may consume
large amounts of memory if large file systems are present. Once "critical"
file systems (e.g. /usr and /var) are mounted, perform a "swapctl -A -t noblk"
to enable swapping on any swap files that may be listed in /etc/fstab.
1997-06-25 23:30:28 +00:00
790379bb6e
add man5/i386 (noted by erik fair)
1997-06-24 04:23:32 +00:00
fb34424eb0
* when checking /etc/master.passwd, read in /etc/shells for a list of
...
valid shells and then check each active account against that
* remove unnecessary ()s in a few printf's.
1997-06-24 02:32:38 +00:00
ff2ea5d139
* take advantage of xargs -0 when finding devices and set?id files
...
* use 'ls -q' in the above, so that characters that may cause problems
in the output are replaced with '?'
1997-06-24 01:16:47 +00:00
d0b6172bfe
Also check /etc/profile for setting of umask.
...
From Chris Jones <cjones@rupert.oscs.montana.edu> in [misc/3763]
1997-06-23 11:59:30 +00:00
b07aea8e1c
Ignore blank lines and comments in /etc/exports
...
From Jaromir Dolecek <dolecek@moria.ics.muni.cz> in [misc/3691]
1997-06-23 01:49:15 +00:00
f067035d68
Add output of `uptime` to report.
...
From Hubert Feyrer <feyrer@smaug.fh-regensburg.de> in [bin/3220]
1997-06-23 01:45:21 +00:00
537136a76e
add man8/sun3x, man1/i386 and man1/x68k entries.
1997-06-22 06:36:30 +00:00
9345f4e581
add man8/mvm368k directories.
1997-06-22 06:24:35 +00:00
cbb4fa0bad
add man1/atari directories.
1997-06-22 05:44:09 +00:00
4056cdf683
Add a comment that you now must have swap entries to satisfy swapctl(8)
...
and add a swap entry for sd0b (copied from the i386 fstab.sd).
1997-06-21 15:40:03 +00:00
08146f8adc
add /etc/profile
1997-06-21 06:10:03 +00:00
8736878363
add sample /etc/profile, cribbed shamelessly from csh.login. consists
...
solely of comments.
1997-06-21 06:07:38 +00:00
0ed99f5f61
Correct cdev/bdev for cd*.
1997-06-18 21:09:36 +00:00
0bea2a15f6
Note that you now must have swap entries to satisfy swapctl(8)
1997-06-16 00:58:49 +00:00
49e47cbf67
Build device nodes for audio device(s). Currently, only unit 0 == custom chip
...
audio.
1997-06-14 22:43:47 +00:00
277b52f964
use swapctl instead of swapon
1997-06-12 15:18:58 +00:00
7945d5eccd
Move sample configuration files for ultrix, sv4 compatiblity from
...
src/etc/etc.<emul>/ to src/share/emul/<emul>/etc/
1997-06-08 23:31:13 +00:00
10efce06ab
Sample /emul/ultrix/etc/svc.conf file for Ultrix compatiblity.
1997-06-08 09:10:21 +00:00
6360466b8b
Add ipfileter stuff.
1997-06-02 20:46:26 +00:00
830bea2938
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 7.
1997-06-01 09:23:57 +00:00
4baed972cd
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 91.
1997-06-01 09:12:02 +00:00
6806df2da7
Add ipl device
1997-06-01 01:23:36 +00:00
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
d351214af2
bug fix and improvements, mostly from Enami Tsugutomo in PR misc/3681.
1997-05-30 05:18:59 +00:00
b19dbed52b
update to version of May 19, 1997
1997-05-29 01:52:25 +00:00
7b5d0624c9
Add device for new serial port.
1997-05-27 07:05:50 +00:00
5fd7ce7066
These updates to the build allow building against include files
...
and libs in the object tree, if you use a separate object tree,
while maintaining backward compatability with other build methods.
See the notes in src/share/mk/bsd.README for full details. Note
that the `make includes' target now only installs the include files
in the build directory (if you use one--otherwise they go in DESTDIR
just like before); `make install' will install include files in
DESTDIR.
1997-05-26 03:55:19 +00:00
7f69979797
Create /dev/ttyaN device nodes for Frodo-based APCIs.
1997-05-23 11:20:27 +00:00
4112a161ec
Back out last commit; bug was fixed in 1.37, but differently.
1997-05-22 21:41:09 +00:00
ab82fdc6b5
The interface setup loop was adding every interface in `ifconfig -l`
...
to $configured_interfaces because it never checked to see if if it
actually configured that interface. For this reason it was setting
$configured_lo0 as well, so that never got configured, causing all
sorts of problems.
1997-05-22 21:29:49 +00:00
7c78d92d27
Forgot 'cat' directories.
1997-05-21 22:50:12 +00:00
768be5bb21
Added architecture dependent subdirectories to man9.
1997-05-21 22:46:08 +00:00
c7acdd0732
Change interface config test so that the loop is always continued
...
if the interface wasn't configured, so that $configured_lo0 and
$configured_interfaces won't get incorrectly set if $net_interfaces ==
DEFAULT. From enami tsugutomo <enami@ba2.so-net.or.jp> in [misc/3635]
1997-05-17 14:12:24 +00:00
1b063db228
wrap $configured_lo0 in quotes, so that it doesn't barf if it's not set.
...
noticed by Thorsten Frueauf <frueauf@ira.uka.de> in [misc/3620]
1997-05-15 02:09:27 +00:00
c20c8f0d8d
fix up minor typos in comments
1997-05-12 23:40:50 +00:00
54e2fe6d7e
provide empty settings for $hostname, $domainname and $defaultroute,
...
with comments indicating alternation locations for info
1997-05-12 11:33:31 +00:00
1775d86183
* add support for $hostname, $domainname, $defaultroute and $ifaliases_XXX
...
* only configure lo0 if not configured by the "configure interface" loop
1997-05-12 11:26:10 +00:00
1e90223347
ntpdate is not a daemon, and add comment for kerberos_server
1997-05-12 05:00:13 +00:00
0dd1ac7fc9
Make xntpd put its pid in /var/run/xntpd.pid.
1997-05-11 05:08:16 +00:00
538bd898e9
add /dev/leds
1997-05-06 18:42:27 +00:00
bf904a4665
Spawn a separate shell for netstart, making sure to check the return value
...
and exit with error if appropriate.
1997-04-29 04:58:38 +00:00
a35572dc38
Source rc.conf to pick up network-related configuration variables.
1997-04-29 04:55:05 +00:00
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00
93d6d76d2b
/usr/games/hide is owned by games.games, /usr/src has mode 755,
...
/var/at is owned by root.wheel.
1997-04-25 06:58:52 +00:00
6b7ae36087
/dev/fd should be owned by root.wheel, mode 755 (like /dev)
...
add 'ignore' tag for /usr/src
tabify, always give uname before gname, octal modes have leading 0
1997-04-25 06:57:23 +00:00
cd9ae1f9a8
Document dc flag and use it for hardwired lines.
1997-04-24 00:35:47 +00:00
889bcd37bc
make motd update conditional on an rc.conf variable (update_motd), and
...
move it before interactive logins are possible (just in case).
1997-04-23 01:24:22 +00:00
d8dcc6580c
Don't list directories with the setuid bit set or FIFOs.
1997-04-21 17:38:39 +00:00
df1a64b9f5
Minor cleanup.
1997-04-21 11:19:57 +00:00
4a0848acd9
When doing security checks in user home directory, sort by home directory, to
...
optimize lookups a little.
Also, add some more files to the naughty lists.
1997-04-21 11:14:41 +00:00
8c70b4d638
move last items from rc.local to rc; rc.local is now actually for local stuff.
1997-04-19 03:10:57 +00:00
cae2f3b253
make /etc/aliases check a bit more discriminating: the line must be
...
uncommented, and it must contain a '|' character (forwarding to program).
1997-04-17 07:42:07 +00:00
c8f5ee730d
Add sound & mixer device nodes (Jesper Nilsson; PR#3342)
1997-04-16 23:19:25 +00:00
046720d7d4
disable decode: alias.
1997-04-16 01:36:15 +00:00
c19956dcd1
Update for recent changes to ftpd(8).
1997-04-06 07:53:20 +00:00
96ba57bbba
Also generate the wd device nodes.
1997-04-04 21:00:53 +00:00
47f9ae0ae6
mountd was moved to /usr/sbin ; pointed out by Thorsten Frueauf.
1997-04-03 11:00:16 +00:00
3deb2910ff
Add /var/log/authlog and /var/log/xferlog.
...
The permissions and especially ownerships of all the /var/log files
should be re-examined -- bin:bin really isn't right for these files.
1997-04-02 05:23:49 +00:00
1470f854b3
Move network interface config after programs run on boot-up, to match
...
the order this actually happens in at boot time.
1997-04-02 01:59:04 +00:00
680e326705
Change the way interfaces are configured on startup.
...
We no longer do /etc/hostname.* files, we do /etc/ifconfig.* files
instead, which contain lines each of which is fed to
ifconfig in turn. A new variable, net_interfaces, controls which
interfaces get brought up, by default, ifconfig -l is used to find a list.
1997-04-01 19:36:17 +00:00
6f6e264129
Use a shell loop to build fd/*, rather than an awk script.
1997-03-31 21:28:24 +00:00
736a7ada1e
Unroll the pty creation loop.
1997-03-31 21:23:34 +00:00
640697a2be
Flush old filter rules and enable ipf again after the fix for
...
src/sys/netinet/ip_fil.c revision1.7
1997-03-30 19:08:14 +00:00
a38935b7bf
/etc/netstart doesn't need to be executable.
...
use four digits for all of the modes.
1997-03-26 07:41:55 +00:00
9e2aafedeb
remove chroot on pwd_mkdb -- use -d option instead
1997-03-24 18:10:00 +00:00
7819184cce
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 07:57:24 +00:00
1d27905d84
fix bogon in the ImageDisk entry, add an entry for 3.5" floppies (useful
...
for making floppy images w/vnd).
1997-03-18 19:55:00 +00:00
80dde71f07
Add assigned numbers for ipsec and ipv6 protocols
1997-03-18 03:49:39 +00:00
2c8588d217
Add the "se" device.
1997-03-18 01:43:51 +00:00
ec30dbdca7
Added mopd.
1997-03-17 00:02:02 +00:00
064ae677a0
Use 8 bits by default.
1997-03-14 20:41:51 +00:00
a8e367fd64
renamed to NetBSD.dist
1997-03-13 04:34:14 +00:00
9eac259efc
mtree/4.4BSD.dist -> mtree/NetBSD.dist
1997-03-13 04:32:11 +00:00
7f3db6ce0d
add cat8/pmax and man8/pmax
1997-03-13 03:36:59 +00:00
100297bdf2
Eliminate another `X'.
1997-03-12 19:23:32 +00:00
2564c9e659
When displaying the names for statd and lockd, include the `rpc.'.
1997-03-12 19:21:26 +00:00
773a52a313
Add . GC , which isn't used.
1997-03-12 19:15:16 +00:00
0e6463ba0a
Do the DEFAULT thing with mountd_flags. Don't output an extra
...
newline for statd and lockd.
1997-03-10 10:15:11 +00:00
814cb67087
Minor cleanup.
1997-03-10 09:45:58 +00:00
40202c2514
Minor cleanup.
1997-03-10 09:34:59 +00:00
2069c0127b
If foo_flags is DEFAULT, run the program with a default set of flags. Most
...
users will use this, and therefore will never have to worry about flags
changing between releases. It's also a bit less error-prone.
1997-03-10 09:16:13 +00:00
ba3dca973c
Add configuration flags for lockd/statd, and start them if an
...
NFS server or client is configured and the flags are not NO.
1997-03-10 06:32:37 +00:00
8a50dcb5df
eliminate dangling references to config.old;
...
from Klaus Klein in PR misc/3295.
1997-03-06 23:41:22 +00:00
d015ce73e5
GENERIC{AHA,OTHER} have been merged into GENERIC; fixes PR port-i386/3274.
1997-03-04 06:30:01 +00:00
bd39709bf4
undo last change; we do use krb4 and we do need these files.
...
add RCSID to README.
1997-02-26 05:37:04 +00:00
4c965051fa
clean up remnants of kerberosIV from Lite2. we use kerberos5, which
...
lives in src/domestic.
1997-02-26 05:04:45 +00:00
1e59980d14
merge in 4.4BSD-Lite2 changes. only SCCS IDs were changed, since all
...
of the lite1-lite2 differences were either already present or
inappropriate.
1997-02-25 07:37:19 +00:00
a22d6abc89
import 4.4BSD-Lite2
1997-02-25 07:12:42 +00:00
cf4d64cd22
add a couple more useful entries
1997-02-24 17:31:31 +00:00
724ccf9f91
Merge in some changes from Lite-1:
...
- send mail.crit to console
- add comment re: authpriv
- add sample line for UUCP (commented out)
1997-02-21 09:04:26 +00:00
57a32a3776
merge lite-1 changes (ftpwelcome, .klogin perms).
...
also eliminate redundant copy of motd.
1997-02-21 08:14:08 +00:00
60474c3689
Whoops. That's asc0, rather than simply asc.
1997-02-19 07:53:42 +00:00
94dd59b832
Update to Jan 22, 1997 version from InterNIC
1997-02-18 19:38:10 +00:00
4f1732c6e0
remove leftovers from lite-1 merge.
1997-02-16 08:17:22 +00:00
1861a56874
Add /dev/ipl.
1997-02-15 10:28:13 +00:00
ef538c3176
cleanup Lite-1 merge
1997-02-15 10:02:07 +00:00
ae06cfb1cf
import 4.4BSD-Lite
1997-02-15 05:27:21 +00:00
5b5eddafe2
Don't leave logs in /etc/mtree; from Andrew Wheadon in PR misc/3106.
...
Also fixed some comments.
1997-02-14 08:52:05 +00:00
6b91a6b891
Add asc device
1997-02-11 08:01:03 +00:00
e55f4e99bf
Missing `)'.
1997-02-10 00:19:08 +00:00
ffabdc3a7a
oops; use $savecore_flags. from kilbi@rad.rwth-aachen.de
1997-02-07 08:59:18 +00:00
4ffaf6dd1c
Add device nodes for DL11.
1997-02-04 19:24:36 +00:00
5e3479c300
clean up slightly, add wd and fd (even though they don't have drivers in
...
the kernel yet).
1997-02-03 20:11:09 +00:00
77a2b28277
Add disktab entry for mdroot and miniroot.
1997-02-03 02:51:51 +00:00
b4891ddaae
don't need -E to ipf.
1997-01-28 06:33:36 +00:00
3fb4736258
ipl is device major 35, not 36.
1997-01-26 08:11:21 +00:00
c794772836
PTY Master is 5, slave is 4. This has been wrong for a long time. How?
1997-01-22 19:31:37 +00:00
85e2541022
install namedb files from subshell so distribution target will work
...
with -j; from PR misc/3116
1997-01-22 04:10:42 +00:00
84250ffb70
Turn off echo, discard, and chargen by default.
1997-01-20 06:10:24 +00:00
7bc37e3777
Turn off expire_news and run_fsck by default.
1997-01-20 06:08:36 +00:00
b61dacb453
Fixed typo. pointed out by MINOURA Makoto.
1997-01-18 11:18:05 +00:00
e022bb3040
close 3095 from Andrew Wheadon -- prefix dummy entries with .
1997-01-18 04:11:06 +00:00
21e443a885
mail.rc now installed by 'make distribution' -- fixes pr-3015
1997-01-16 23:10:16 +00:00
9781227389
Add ipl device.
1997-01-13 23:38:43 +00:00
d511e1bc80
update to match reality; PR misc/1075.
...
also added new files in /etc.
1997-01-11 07:28:34 +00:00
81e84482e0
Add missing "\".
1997-01-09 06:38:16 +00:00
a4b0df8ac6
fix typo
1997-01-09 05:44:46 +00:00
51e8626508
RFC 1597 has been obsoleted by RFC 1918.
1997-01-09 05:33:14 +00:00
4dcb246ef0
add files related to the new rc world order.
1997-01-08 23:59:50 +00:00
2fadfb1a2f
add 'ipl' device node entry, for ip-filter.
1997-01-07 08:04:19 +00:00
9d9af955fb
The Kerberos server host should run kadmind, so users can change their passwords!
1997-01-07 04:35:50 +00:00
09920ad438
add /var/cron/tabs/root.
1997-01-07 03:56:47 +00:00
45d3ac17e1
add 'ipl' device node entry, for ip-filter.
1997-01-07 00:10:07 +00:00
2595ae2af9
Added ipl ip filter device.
1997-01-06 02:56:36 +00:00
629c24fcf4
Add "ipl" device.
1997-01-05 21:32:17 +00:00
e83414c602
Use shell arithmetic rather than expr(1), per Charles Hannum. (Wow,
...
a major speed improvement on an hp319!)
1997-01-05 21:21:43 +00:00
c3bbca084b
add /usr/sbin to PATH.
1997-01-05 20:42:57 +00:00
e26b100bee
create ipl device.
1997-01-05 20:41:01 +00:00
3896082c5a
Add rd, sd, cd, md, st, ss, uk, ch and ipl device entries.
1997-01-05 18:49:12 +00:00
8607697348
create ipl device.
1997-01-05 13:49:32 +00:00
3b98afb4c5
move start-time configuration from netstart, rc, rc.local into
...
the new /etc/rc.conf. this also includes the following changes:
netstart: ifaliases now includes a netmask, to ensure
aliases work.
rc/rc.local: make _everything_ based on configuration
in rc.conf. also move things around such that DNS and
YP are started early enough that other daemons needing
their services also exist. move ldconfig from rc.local
here, and also make it use /etc/ld.so.conf if it exists.
run /etc/rc.lkm if it exists, a boot time.
1997-01-05 12:01:54 +00:00
52a5311c49
add rc.lkm and lkm.conf, to be run from /etc/rc.
1997-01-05 11:47:53 +00:00
a9efb63860
add configuration file for security, as security.conf.
...
the file allows each action taken by security to be
turned on or off.
1997-01-05 11:46:12 +00:00
016b324a94
add configuration file for daily, weekly, montly, as
...
daily.conf, weekly.conf and montly.conf. the file
allows each action taken by all scripts to be turned
on or off.
1997-01-05 11:21:09 +00:00
4731be4264
add local, R5 and R6 whatis directories.
1997-01-04 14:04:59 +00:00
8708ba6659
remove redundant path directories.
1997-01-04 14:04:34 +00:00
7f44e3e76e
add new files.
1997-01-04 14:04:09 +00:00
9d18dd7b36
comment localised configuration.
1997-01-04 14:03:32 +00:00
4bb3612c55
Device rename: `rd' => `md'
1997-01-01 23:46:17 +00:00
ca69bed024
turn off internal udp services, and log rshd connections; ideas from openbsd.
1996-12-29 03:32:44 +00:00
bdfb38a243
comment some localised entries; idea from openbsd
1996-12-29 03:30:09 +00:00
e7ebd3975e
add nfs and ircd
1996-12-29 03:25:34 +00:00
702d0ff147
add /bin/ksh
1996-12-29 03:23:07 +00:00
160f67a956
add ftp-bugs; idea from openbsd.
1996-12-29 02:41:23 +00:00
d9ec74b797
MAKEDEV
...
- Add ch and uk devices.
- Add ttyC devices nodes for the A2232 board (msc*).
- Remove expr calls.
- Change the ss device number from 25 to 37,
ATTENTION: you need to rerun /dev/MAKEDEV to update your devices files.
1996-12-20 17:24:45 +00:00
977de7d51c
Add rtc-device.
1996-12-16 21:30:37 +00:00
c82951e68c
add inetd_flags, mostly from <jbernard@tater.Mines.EDU> in pr#2987
1996-12-04 12:55:33 +00:00
f355fafa1d
AUTHPRIV syslog messages go to /var/log/authlog instead of /var/log/secure
...
(in line with other systems)
1996-12-04 05:10:42 +00:00
840a8b60a9
add floppy formatting table
1996-11-29 16:31:54 +00:00
ff62bb6144
Fix missing continuation char for added su# line.
1996-11-28 09:08:14 +00:00
5bffc0a5e9
* Add copy of Alpha RZ25 disktab entry, modified to pmax-size partitions.
...
* Add :su#: entry for the RZ58, which uses ZBR and is larger than
multiplying out ns, nt, nc would suggest.
* Add some entries for locally-popular third-party disks, again
adding :su#: entries, as examples..
1996-11-28 03:22:34 +00:00
ae3ad75501
Eradicate all the expr goo by following Charles' example with the i386
...
MAKDEV.
1996-11-23 04:22:45 +00:00
d4f266fe78
Add missing generic devices, and avoid expr(1) in the way that
...
Mycroft did in the i386 MAKEDEV.
1996-11-21 08:28:44 +00:00
b06fb1f02b
- send authpriv to /var/log/secure only (not to console or /var/log/messages)
...
(closed [misc/574])
- send ftp to /var/log/xferlog
- prevent anything that goes to a restricted file (e.g., /var/cron/log)
ending up in /var/log/messages
- rotate /var/lgo/secure
- install the default logs with permissions consistant with those
set by newsyslog.conf (and commonsense)
1996-11-20 04:33:24 +00:00
c27ed88032
Deal with missing `cgtwo', `uk' and `ss' devices.
1996-11-12 00:00:45 +00:00
618f2d5911
Eliminate lots of expr(1) calls, as suggested by Charles.
1996-11-11 22:34:51 +00:00
032c652e4f
Update name of KVM database.
1996-11-11 06:38:00 +00:00
6fda3d6fa9
add lp
1996-11-09 04:01:32 +00:00
6f26fca547
updated MAKEDEV based on i386 version (as requested by mycroft)
1996-11-08 22:32:11 +00:00
7ecf22ab74
add directories for alpha-specific manual pages in {cat,man}{4,8}
1996-11-07 21:04:36 +00:00
b4769d94fa
* Speed up MAKEDEV by using the changes from etc.i386/MAKEDEV.
...
* MAKEDEV now knows about ch, ss, uk and rtc devices.
1996-11-07 07:47:53 +00:00
fade7cfdf7
The floppy minors are shifted. This in expectation of the Hades floppy driver.
1996-11-06 13:32:21 +00:00
85ac030199
Move vax-specific microcode install stuff into etc.vax.
1996-10-26 08:12:09 +00:00
18a4f7f093
change rd* target to produce rd?[abc] and rrd?[abc] devices.
...
add "ramdisk" target which is basically floppy + rd0, needed for
new install system.
1996-10-21 19:58:25 +00:00
cb9edbe5f6
slight clean up of that last (fix some major numbers)
1996-10-18 21:53:27 +00:00
f753842b39
sync with conf.c: kill mmclock; add rd, audio, ss, and uk.
1996-10-18 21:16:39 +00:00
d7e3f85045
remove obsolete doc/smm/01.setup/{vax,tahoe}.
1996-10-18 07:04:24 +00:00
871c9c08af
Use ${INSTALL}.
1996-10-18 02:37:51 +00:00
a052e07196
removed most tahoe references
1996-10-17 04:38:49 +00:00
dd0b341ac0
removed most tahoe references
1996-10-17 04:29:14 +00:00
d98e97aa8a
New and improved fstab samples, now with examples of procfs, kernfs
...
and cd9660 file systems, an mfs mounted /tmp, an example swap
partition, correct fsck scheduling, and even comments pointing users
at man pages for more information. I'm still not sure we need these
sample files at all, but at least they are now useful to the new user.
1996-10-16 15:20:12 +00:00
c1436aa832
restore snap_md target (sigh...)
1996-10-16 02:25:08 +00:00
a49720ce9d
add a comment documenting what the NOOBJ variable is here for.
1996-10-16 01:30:11 +00:00
f306045ae7
remove md tahoe conditionals -- we don't need them.
1996-10-15 23:59:32 +00:00
187216b4e6
removed obsolete garbage associated with obsolete snapshot
...
functionality. Snapshots are built with tools in src/distrib
1996-10-15 17:45:31 +00:00
7739c57905
Remove obsolete snapshot functionality (which is now in
...
/usr/src/distrib) -- Makefile.inc is now a no-op. I chose not to
remove it completely because port specific stuff might show up someday.
1996-10-15 17:43:57 +00:00
b1dfe12b2f
Remove very obsolete kernel copy floppy construction tools -- these
...
are all now in /usr/src/distrib/i386
1996-10-15 17:30:58 +00:00
865cba4567
RCS ID Police
1996-10-15 03:57:02 +00:00
725b03db3a
RCS ID police
1996-10-15 03:42:50 +00:00
9df6319a29
merge in 1.2 branch
1996-10-09 00:40:33 +00:00
c8abf2609b
Nuke use of 'expr' and add ch/ss/uk devices as suggested by Charles Hannum.
1996-10-04 06:52:52 +00:00
b0119cdb4c
add dhcpd startup; disabled by default
1996-10-03 07:11:35 +00:00
d58b878498
Fix PR/1024: Add /usr/local/{s,}bin to the path and the gnu sources to
...
cdpath. I think that adding /usr/local to the path is ok: everyone does
it, and it is part of mtree.
1996-09-30 17:33:21 +00:00
67af0bc1f0
RCS id police
1996-09-17 21:45:53 +00:00
6cf64bc50d
* Add target for all, needed for 1.2 distributions and installation.
...
* Add entries for fb? generic framebuffer pseudo-device.
* comment in entries for lkm.
1996-09-17 04:00:00 +00:00
4ecb59bd55
fixed rd entry and cleanup slightly
1996-09-16 20:56:24 +00:00
82f8d6bb4b
added ccd(blk)/ch/uk device
1996-09-16 20:08:56 +00:00
fc7d845dfa
Added missing SCSI scanner entry (ss).
1996-09-10 23:19:43 +00:00
21784a56b6
Correct char device major number for `rd'.
1996-09-08 03:33:55 +00:00
69b13f156d
Document `ch'.
1996-09-08 03:16:28 +00:00
838bd1a7ae
Add `ss' and `uk'. Sync `all'. General cleanup. (No more expr!)
1996-09-08 03:12:23 +00:00
161e3370d0
Remove nis from the search path since it does not work.
1996-09-01 16:33:07 +00:00
fd85e20138
Create /usr/share/man/{cat4,man4}/pmax/
1996-08-30 05:13:21 +00:00
80f46e929a
add /usr/lkm
1996-08-28 22:16:42 +00:00
1986672399
move rpc daemon startup to after network startup so that if the machine is a DNS server and wants to resolve via itself, one doesn't have to wait for all the DNS queries to time out as each rpc daemon starts. This was particularly ugly with mountd.
1996-08-26 06:02:21 +00:00
b86b695240
add Advanced Power Management driver
...
Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-25 23:38:57 +00:00
1dafc7f44c
ooops... forgot to back out after generating the dir
1996-08-16 17:26:30 +00:00
160408037c
ooops... forgot to back out after generating the dir
1996-08-16 17:25:28 +00:00
9689b5cfe8
Changes for new groff -- new device directory
1996-08-16 17:22:53 +00:00
7143a7612e
Quote the YP daemon flags variables.
1996-08-09 16:07:42 +00:00
d82cbdfb69
Create /var/yp and /var/yp/binding.
1996-08-09 10:32:45 +00:00
2dfaa56a79
Change how the YP daemons are started. Previously, ypbind was always
...
started if the directory /var/yp exists. Now, ypbind, ypserv, and
rpc.yppasswdd are started like other daemons; there are flags variables
for these programs. To disable them, set the variables to "NO", otherwise,
their contents are passed as flags.
1996-08-09 10:29:44 +00:00
a8ea317ed4
keymap -> keymaps
1996-07-15 06:24:07 +00:00
667d9ae775
Put in mt additions. Remove tms.
1996-07-14 13:58:38 +00:00
4371fb2956
Comment out code which traverses the directory hierarchy and removes
...
files, as the ``find . ... -exec rm'' used to do so can be subverted
and used to remove arbitrary files.
1996-07-02 23:10:35 +00:00
50334a801c
Set the /dev/reload protection after creating it, not the /dev/mem one.
...
Thanks to Carsten Hammer for pointing this out.
1996-06-24 18:44:28 +00:00
19bc17a97d
Add a directory to store the atari keymaps
1996-06-22 20:31:24 +00:00
05b852e890
Add directory for Amiga binary keymaps.
1996-06-21 22:13:54 +00:00
d5a4ec3087
Add tcx framebuffer.
...
Add rd memory disk device.
1996-06-20 20:26:53 +00:00
c893f3f107
{,r}cd0c's minor number was wrong; fix. Make all device nodes for
...
'cd', just like for 'sd', 'vnd', and 'ccd'.
1996-06-18 00:35:43 +00:00
342179751f
added entry for install floppy
1996-06-17 02:28:39 +00:00
49919b46dc
add a no-op 'includes' target for completeness. make 'make distribution'
...
do a 'make includes' as well as install, so that distribution trees will
contain includes.
1996-06-05 21:55:13 +00:00
54b0562c1e
Add alias floppybt -> miniroot
1996-05-27 15:56:40 +00:00
1bc171a451
Added man4/x68k & man8/x68k.
1996-05-22 15:49:45 +00:00
efd38e0ffd
create usr/include/g++/std
1996-05-22 01:46:42 +00:00
102584d38e
don't put bogus info in here.
1996-05-22 01:36:12 +00:00
ae9c1a8712
install mrouted.conf, networks and rbootd.conf. pr#2288
1996-05-22 01:27:34 +00:00
2bc04b57a8
ignore setgid on dirs.
1996-05-22 00:51:08 +00:00
68188bee78
check DESTDIR. Added 'snap_md' rule.
1996-05-21 15:15:18 +00:00
905ffab8e0
add /usr/share/vi/catalog
1996-05-20 04:59:29 +00:00
4be4e41eb4
import rd stuff from sun3
1996-05-20 01:40:42 +00:00
86f6358f46
add ramdisk, clean
1996-05-20 01:35:48 +00:00
faf417775b
MAKEDEV: updated for grf6 and ttye6
...
ttys: new entry for ttye6
1996-05-19 21:03:49 +00:00
8fa11797a2
/etc files for NetBSD/x68k
1996-05-19 12:35:18 +00:00
86fd52c9eb
RCS id police.
1996-05-12 23:30:23 +00:00
119686fe4f
A master.passwd has mode 0600 (PR#1405).
1996-05-08 21:30:18 +00:00
61c2c31c31
Make permissions on several /usr/include/* directories consistent
...
with the way `make includes' treats them (PR#358,PR#717).
1996-05-08 21:23:06 +00:00
ecfa4355a6
RCS id police.
1996-05-08 17:19:17 +00:00
590d520dc2
Sync legend with man page (Hubert Feyrer; PR#2310).
1996-05-07 22:25:55 +00:00
4d9f29c4ff
RCS Id police.
1996-05-07 20:33:53 +00:00
cf35beca6c
Added creation of the iic and rtc character device files.
1996-04-26 20:10:24 +00:00
103e63b59a
Fix the snap_md target to use the correct kernel names; GENERICAHA and
...
GENERICBT were replaced with GENERICADP and GENERICOTHER some time ago.
XXX The kc_* targets here are still broken, but aren't currently used
XXX anyhow. This change allows one to at least do a "make snapshot".
1996-04-23 17:39:39 +00:00
c4212ae7de
the amiga uses the c-partition for the whole cdrom disc and not the
...
d-partition which is used by the i386 port
don't forget to update the device nodes in /dev before you try cd-audio
players like xmcd2.0
1996-04-13 01:02:18 +00:00
bc56857b49
help "make distribution" along
1996-04-12 22:51:00 +00:00
2429048059
add rawip, ticlts, ticots, and ticotsord
1996-04-11 12:59:45 +00:00
ef2af437ba
SMM '03.fsck' has been renamed '03.fsck_ffs'
1996-04-05 01:52:24 +00:00
drochner