packets due to wrong buffer size computations. The corrupted
mbufs could lead to a panic.
Fix computation of link mtu where the link mtu itself is unspecified.
Limit ICMP error packets for IPv6 to MMTU as required by RFC4443. This
also avoids dropped errors when the length exceeds the link mtu.
using an EXTERN_INLINE definition for functions that are defined as
inline but provide an externally callable reference.
(these are externally called in ipftest)
pfs(8) is a tool similar to ipfs(8) but for pf(4). It allows the admin to
dump internal configuration of pf, and restore at a latter point, after a
maintenance reboot for example, in a transparent way for user.
This work has been done mostly during my GSoC 2009
No objections on tech-net@
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
Note: the ipf code contains a lot of ifdefs, some of them for NetBSD
versions that are no longer maintained. It won't make the code more
readable, but we should consider removing them.
Pfsync interface exposes change in the pf(4) over a pseudo-interface, and can
be used to synchronise different pf.
This work was part of my 2009 GSoC
No objection on tech-net@
http://git.moblin.org/cgit.cgi/acpica/commit/?id=26a2eea9f4a18acb0ba2a92070d945d9835df948
I uncovered the bug by having the console flooded with:
ACPI Error (evgpe-0896): No handler or method for GPE[ 0], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 1], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 2], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 4], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 5], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 6], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 7], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 8], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ 9], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ A], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ B], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ C], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ D], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ E], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[ F], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[10], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[11], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[12], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[13], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[14], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[15], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[16], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[17], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[18], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[19], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1A], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1B], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1C], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1D], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1E], disabling event [20080321]
ACPI Error (evgpe-0896): No handler or method for GPE[1F], disabling event [20080321]
and with breaking into ddb:
ACPI Error (evgpe-0899): No handler or method for GPE[ 0], disabling event [20080321]
fatal breakpoint trap in supervisor mode
trap type 1 code 0 rip ffffffff8020c1fd cs e030 rflags 296 cr2 0 cpl 8 rsp ffffffff80f32c98
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x5: leave
breakpoint() at netbsd:breakpoint+0x5
AcpiEvGpeDispatch() at netbsd:AcpiEvGpeDispatch+0x9f
AcpiEvGpeDetect() at netbsd:AcpiEvGpeDetect+0x136
AcpiEvSciXruptHandler() at netbsd:AcpiEvSciXruptHandler+0x46
Xresume_xenev6() at netbsd:Xresume_xenev6+0x55
With this merged fix console is no longer flooded and I get in dmesg:
ACPI Exception (evevent-0165): AE_BAD_ADDRESS, Unable to initialize fixed events [20080321]
acpi0: unable to enable ACPI: AE_BAD_ADDRESS
Upstream fix pointed out by jmcneill@, merged fix ok'd by joerg@.
2031730 4.1.31 Nat drops fragmented packets after the first
http://ipfilter.cvs.sourceforge.net/viewvc/ipfilter/ipfilter/ip_nat.c#rev1.2.2.48
Fixes problems on UDP NFS with ipnat as mentioned in PR kern/38773 and
PR kern/41074. Tested on several slow NFS clients and an i386 server
running ipnat.
Should be pulled up to 5.0.
has been changed from m0 to *mpp. But as *mpp has been set to NULL just
before the call, we end up calling ether_output() with a NULL mbuf,
leading to a NULL pointer dereference. Revert back to using m0 here.
The issue show up when using 'return-rst' or 'return-icmp' in ipf6.conf.
Problem discovered and fix tested on ftp.fr.netbsd.org.
When a link-layer address changes (e.g., ifconfig ex0 link
02🇩🇪ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
rmind