67e8cf0262
No need to include rf_sys.h.
1999-08-13 03:37:42 +00:00
ae6f518821
Garbage-collect CCDF_SWAP; no longer used, and doesn't make any sense
...
with the UVM swap code.
1999-08-11 02:44:35 +00:00
d0740fb357
Add two more options to raidctl:
...
-p check (and return) the status of the parity
-P check the status of the parity, and rebuild if necessary
Addresses PR#7494
1999-08-10 18:21:39 +00:00
cbac3515fc
xref mount_ntfs(8) in SEE ALSO
1999-08-08 04:40:18 +00:00
180bbfd871
Move two functions from rf_strutils.c into rf_configure.c, removing
...
the need for rf_strutils.c.
1999-08-07 23:48:11 +00:00
fac3e3fdcf
* put new BUGS section instead of CAVEATS, which explicitely warns NTFS
...
is experimental and should be used with extreme caution
* give credit to christos & me for the NetBSD port
1999-08-05 15:45:01 +00:00
95d53bad01
Fix PR7747: umount -R dumps core
...
(fix by Ronald Khoo from PR applied)
1999-08-02 02:40:38 +00:00
c71139914f
s/on device/in [dirname]/, to be a bit clearer...
1999-08-02 00:33:01 +00:00
398c91fa04
Adjust column-sizing code to keep output in 76 character lines, so output
...
doesn't wrap in sysinst.
1999-07-30 17:44:01 +00:00
6205a5ed9e
don't use the result of a readdir() after closedir(), from
...
Christian Groessler per PR bin/8107
1999-07-30 15:56:58 +00:00
958ed46f74
Collect all little usage-messages spread around into one place,
...
and as a side effect, print the available commands (and their
usage) if no command is given on the command line.
Approved by Jason Thorpe.
1999-07-30 02:29:04 +00:00
76a67357f0
fix alignment problem of SIOCGIFCONF, on 64bit arch.
1999-07-29 15:40:48 +00:00
47a0fd892a
sync with recent KAME.
...
- warn if net.inet6.ip6.accept_rtadv=0 (the command has no use in this case)
- conformance to RFC2461: obey declared timing constants more strictly
1999-07-29 09:57:58 +00:00
fbff06b0ef
Replace the existing version of nologin(8) with a rewrite that was done
...
according to the behaviour documented in the manual page. That way, the
copyright notice can be dropped.
I place the rewritten version into the public domain. Fixes PR 5784.
1999-07-27 03:56:13 +00:00
c483de17ca
Make the previous actually compile.
1999-07-26 19:38:36 +00:00
0717bdfdf2
cleanup error message
1999-07-26 12:00:47 +00:00
870447b902
don't allow destination addresses to be set for non-Point-to-point interfaces
1999-07-26 11:56:55 +00:00
6b8e92147e
after determining the size of a file being used as a msdosfs, seek back to
...
its start so subsequent writes go to the right places.
1999-07-26 00:28:57 +00:00
30353dfe38
s/makeing/making/ (in a comment)
1999-07-25 05:53:01 +00:00
eda6e4cca4
Address PR bin/7623: if the filesystem is so small (or segment size so large)
...
that not enough segments are available for the second superblock, or to have
MIN_FREE_SEGS free for work room for the cleaner, newfs_lfs will now exit
with an error.
1999-07-22 20:14:29 +00:00
a335a76e3b
s/atoi/strtol/ and check if argument given to -i was really a valid
...
number.
Patch submitted in PR 6456 by lha@stacken.kth.se
1999-07-22 02:04:13 +00:00
03f1e83295
Try $TMPDIR before resorting to _PATH_TMP.
1999-07-21 17:56:34 +00:00
01ec1d5609
Don't try to play games with the BSS; just make it work.
1999-07-21 03:32:53 +00:00
b1e9d43575
Add description of /proc/#/cmdline to mount_procfs.8.
...
Closes PR misc/8021.
1999-07-19 08:02:07 +00:00
9e2ce6114e
tweak IPv6 case so that "route show" does not truncate numeric IPv6 address.
...
PR: 7955
1999-07-17 06:51:27 +00:00
ea4e0f4bc9
- don't core-dump if hints file is too short
...
- unmap the space and close fd's
- bcopy -> memcpy
- stat the file to get the size to map, instead of doing multiple mmaps.
1999-07-16 22:23:29 +00:00
7fa6616468
Address PR 7412: fix newfs_lfs.8 to list all real options for newfs_lfs;
...
also fix newfs_lfs to get rid of all sorts of useless options that applied
only to newfs_ffs. Corrected reference to the FFS paper to the reference
to the BSD-LFS paper.
1999-07-15 19:09:40 +00:00
138dd70b28
From PR-7951 by Joachim Kuebart:
...
Add support for Microsoft Joliet long filename extensions to the
cd9660 filesystem.
1999-07-13 11:12:49 +00:00
d4aa58bc6c
avoid using constants, use #define'd values.
1999-07-12 20:46:15 +00:00
5c0a411355
do not modify BINGRP as there's no reason for.
...
From: tsubai@netbsd.org
1999-07-12 19:02:04 +00:00
8c46b24007
correct typo. s/LDADD/DPADD/
1999-07-12 19:00:52 +00:00
7c564a9ce6
Update to new mount arguments.
1999-07-08 03:04:39 +00:00
dd514ad75e
Incorrect integration. ctime takes a time_t value, not a long.
1999-07-06 23:15:48 +00:00
d1d8f0f73c
do not pass NULL to errx().
...
From: Chris Joness <cjones@rupert.honors.montana.edu>
1999-07-04 15:24:35 +00:00
4cd93a1723
do not bark even if ipsec policy setting for "route flushing 127.0.0.1"
...
ping socket is not successful. it usually means that the kernel is
not ipsec ready, and in that case this should be just okay.
1999-07-04 13:27:03 +00:00
b7ee9c3863
add NetBSD RCS ID.
1999-07-04 02:43:39 +00:00
fab76c80cf
be friendly with non-IPsec kernel.
...
don't exit even if ipsec policy config fails.
1999-07-04 01:11:23 +00:00
9d343b25ca
RCS Id police.
1999-07-03 19:55:03 +00:00
8bfcc5ad34
Add a new -s option to make it easier to test the link-level status
...
(i.e., 10baseT carrier/no carrier) of an interface from scripts
ifconfig -s <interface> will exit with a false status if the interface
reports its unconnected.
-s also works in conjunction with -l and -a, filtering out interfaces
which are reporting down.
Also, add -b (which shows only broadcast interfaces with -l and -a).
I find these options useful in network autoconfig scripts for mobile
systems.
1999-07-03 17:31:15 +00:00
19b055d5a7
0 -> STDIN_FILENO
1999-07-03 15:09:51 +00:00
9a6abc8c5d
s/CFLAGS/CPPFLAGS/ for -D and -I.
1999-07-03 06:26:25 +00:00
c04f585990
stop using __RCSID from UCB comment.
...
Hope this fixes PR 7892.
1999-07-02 17:52:36 +00:00
8ecadeaecd
Build fdisk on bebox and ofppc(replaced powerpc).
1999-07-02 17:48:26 +00:00
565fad43fa
write up IPv6 operations (prefixlen and others)
1999-07-02 15:45:46 +00:00
d211125175
IPv6-ready route command (-inet6 and -prefixlen are added)
1999-07-02 15:29:02 +00:00
8f071200a3
rtsol: Throw IPv6 router solicitation to request autoconfiguration
...
(to be used on end host).
1999-07-02 08:28:04 +00:00
909714f4a5
IPsec support (specify policy on ping - quite useful to test
...
if IPsec is working or not) is added.
1999-07-02 04:53:23 +00:00
011b182801
Fix some printf format problems.
1999-07-02 00:19:44 +00:00
e7d046463f
-D... belongs in CPPFLAGS
1999-07-02 00:04:53 +00:00
62d68abdad
Fix LP64 printf format problem.
1999-07-01 23:59:11 +00:00
bad54b26c6
enable -DIPSEC.
1999-07-01 20:19:35 +00:00
68ad03fe5d
ping for IPv6. try
...
ping6 ::1
on you node.
1999-07-01 19:59:59 +00:00
125cb421d5
Note the default tape device is taken from _PATH_DEFTAPE in /usr/include/paths.h
1999-07-01 19:18:47 +00:00
25eb444e29
make ifconfig IPv6-ready.
...
TODO: update manpage for new options.
1999-07-01 13:19:20 +00:00
fb88e47b54
Remove an extraneous fclose() call which would cause savecore to crash
...
if the bounds file was unwritable (e.g. because /var was read-only).
Fix supplied by Ronald Khoo in PR#7887.
1999-07-01 08:53:35 +00:00
7fe5a79110
Flesh out the manual page, add an examples section, and correct some of the
...
English.
1999-06-28 21:48:13 +00:00
f6e78dac05
Default device is nrst0 not rst0
1999-06-28 01:32:49 +00:00
8847804fc3
Regularize error reporting of mount_* commands for failure of mount(2)
...
to the form:
mount_xxx: dev on dir: reason for failure
1999-06-25 19:28:35 +00:00
9e91c8ebd7
Use ufs_daddr_t instead of u_long, so non-32-bit architectures can clean seg 0
1999-06-24 16:45:14 +00:00
6c3d02c865
Support for ping -a: beep when packet received.
...
Slightly tweaked from version submitted by andrew@untraceable.net in PR7815
1999-06-19 19:15:22 +00:00
3787c5c3d8
MAP_COPY -> MAP_PRIVATE
1999-06-17 21:09:47 +00:00
72a64c5437
add ELF support, mostly from joda@pdc.kth.se (Johan Danielsson) in PR#6149,
...
updated for the symtab support for a.out (non for ELF yet) and other cleanup
by myself. should work on the alpha as well as other ELF ports...
remove the ld(1) output by default, rather than leaving little binary turds
across the filesystem...
1999-06-13 12:54:40 +00:00
bb880545b1
Fix a typo.
1999-06-12 17:17:16 +00:00
eb2854e11b
Use pidfile(3).
1999-06-06 02:00:32 +00:00
a895e91016
Make BSDLFS a EXT2FS-like filesystem, that is, dont print or parse the cpg
...
field.
According to disklabel.h, its LFS semantics are "segment shift" (log2(segment
size)), but in the code it is used nowhere, and there are even plans to
allow non-poweroftwo segment sizes, so it won't ever work.
While at this, simplify the disktab-like output routine... here, currently,
BSDFFS, BSDLFS, EX2FS and ADOS do the same, so don't duplicate the code.
1999-06-04 19:02:34 +00:00
7d344bb51b
Make sure the boot selector actually gets updated if you only change
...
the timeout and/or the default menu choice.
1999-06-04 18:59:15 +00:00
37cb96a063
Print bsize and fsize in disktab-format output also for LFS and ADOS.
1999-06-03 21:15:49 +00:00
85270790c6
Print/parse block size, fragment size and cpg for FS_BSDLFS and FS_ADOS.
...
(cpg has different semantics for LFS and ADOS, but is in use.)
XXX The disktab reading/disktab format output writing needs still to be done.
1999-06-03 20:59:04 +00:00
50f0c49606
On NetBSD/alpha, go out of the way to read the boot area's contents if -r
...
is specified, so that the boot blocks aren't clobbered when writing labels.
1999-06-03 01:58:51 +00:00
a54ad4c40d
kill some bogus comments about -r: it _does not_ cause the boot area to
...
be clobbered. since 4.4-Lite(?) disklabel.c has gone to extra effort
to avoid clobbering the boot area when using -r, but the 4.4-Lite manual
pages were apparently not updated to note that!
1999-06-03 01:49:58 +00:00
9526bd4df7
Patch for PRs 5124, 5535: correctly interpret the gid mapping file, rather
...
than using the last uid map entry for every gid map entry.
1999-06-01 19:16:49 +00:00
3d882ef79b
Remove non-existant option -t from usage.
1999-05-28 10:10:25 +00:00
6f14acdddf
If -c not set on command line and the partition has a non-zero cpg
...
value, use it for the number of cylinders per group. So now the value
in the disklabel does something. :-)
1999-05-19 00:25:59 +00:00
e9d0bd756d
Fix a slight braino in last.
1999-05-18 18:01:08 +00:00
7d4047e4bc
Use the system search path for ntfs headers.
1999-05-17 16:44:53 +00:00
52971adece
Don't force `inet' on status display; get all address families that have
...
configured addresses. From Jun-ichiro itojun Hagino, PR #7593 .
1999-05-17 16:00:05 +00:00
64a1f3885d
Add NOTES section. Indicate that fstype in disklabel should be set to 4.2BSD.
1999-05-16 20:58:49 +00:00
6735cc1a4c
Make newfs's spare superblock output nicer. Figure out how wide the
...
largest block number will be, and make the columns wide enough for it. Then
make enough columns to fit in an 80 character window.
Samples: small end & faked up values:
super-block backups (for fsck -b #) at:
32, 176, 272, 416, 512, 656, 752, 896, 992, 1136, 1232, 1376, 1472,
1616, 1712, 1856, 1952, 2096, 2192, 2336, 2432, 2576, 2672, 2816, 2912, 3056,
3152, 3296, 3392, 3536, 3632, 3776, 3872, 4016, 4112, 4256, 4352, 4496, 4592,
For a 155 GB fs we have:
super-block backups (for fsck -b #) at:
128, 65792, 131456, 197120, 262784, 328448, 394112,
459776, 525440, 591104, 656768, 722432, 788096, 853760,
919424, 985088, 1050752, 1116416, 1182080, 1247744, 1313408,
1379072, 1444736, 1510400, 1576064, 1641728, 1707392, 1773056,
...
317462144, 317527808, 317593472, 317659136, 317724800, 317790464, 317856128,
317921792, 317987456, 318053120, 318118784, 318184448, 318250112, 318315776,
318381440, 318447104, 318512768, 318578432,
Now it actually looks like someone's thought about making large fs's. :-)
1999-05-14 22:36:50 +00:00
17371dd632
Make this compile...
1999-05-06 16:08:54 +00:00
0dd3286354
Add mount_ntfs
1999-05-06 16:05:26 +00:00
67e9632a62
Import yesterday's FreeBSD mount_ntfs source
1999-05-06 16:05:21 +00:00
3a1d0ae5c7
Avoid byte overflow in block estimate for large files
1999-05-05 16:53:46 +00:00
563aff8153
Add a 'chain' command in interactive mode that allows you to vary the
...
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
1999-05-03 09:45:01 +00:00
6a2c64449b
Sanity check the drive number in %dl and use it instead of blindly
...
assuming disk 0.
1999-05-02 13:48:30 +00:00
7d18a1432b
Tighten check for bad drive numbers to avoid passing garbage to the
...
2nd stage loader.
1999-05-02 12:20:01 +00:00
c0042f7871
Because of space constraints, error messages got shortened. Reflect this
...
in the manual page.
1999-05-02 12:18:40 +00:00
cbf8e59c01
Make check if we need int13 extensions for the bootselector more correct.
1999-05-02 12:17:48 +00:00
5a48cda98a
Remove confusing entry about cylinder boundaries.
1999-05-02 12:17:13 +00:00
255793452f
Since fdisk/mbr contains a man page, we need to descend into it regardless
...
of which ${MACHINE} we are.
1999-05-02 04:42:47 +00:00
69741f8d3d
Fix typo.
1999-05-01 20:04:14 +00:00
855480012b
Invert the meaning of -s, from "don't load symbols" to "load symbols".
...
Document that this is expensive (and why) in the BUGS section.
1999-04-30 18:32:01 +00:00
8eeaf82ae4
- Use the proper multiply instructions so that we don't get truncated.
...
- Fix comparison, which did not work before.
1999-04-30 15:29:44 +00:00
e8dacca7c3
STRICT_ALIGNMENT only applies to the start of partitions, not length.
1999-04-30 04:46:50 +00:00
144e7d3345
Remove duplicate paragraph. Closes PR/7498 by Geoff C. Wing.
1999-04-29 21:53:08 +00:00
e312a3c208
Fix disklabel -t to work with disks that don't end on a cylinder. Before it
...
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.
Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
1999-04-29 19:12:07 +00:00
a6f7895b92
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.
Change the mbr manualpage to reflect some shorter error messages.
1999-04-28 23:27:01 +00:00
2969961420
Allow partitions to extend to the end of the disk, even when
...
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
1999-04-26 02:05:46 +00:00
ae3b9e217c
add a -D line to usage().
1999-04-26 01:02:25 +00:00
4a22f0e03d
Fix entry point parsing if output file specified to modload (PR7352)
1999-04-23 17:47:02 +00:00
6d094b5b76
Copy code across from newfs so that 'fsck sd0a' and similar will work.
1999-04-22 04:20:53 +00:00
fb524f3e3b
one-line copyright message
1999-04-17 17:55:13 +00:00
48c1c25ba5
Make the bootselector configurable by fdisk. Add a -B flag to this
...
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
1999-04-17 01:38:00 +00:00
6299fb0813
Correct nokerninfo tty flag being left set in most error cases.
...
Closes PR/7388 by Dave Huang <khym@bga.com>.
1999-04-17 01:17:15 +00:00
8b4801d18a
change wording slightly.
1999-04-16 23:56:22 +00:00
8920adf7b2
add lmcctl.8
1999-04-16 23:40:52 +00:00
7adcf112ca
Add a manual page describing the MBR and the bootselector.
1999-04-15 22:35:19 +00:00
fa9bff9be1
Add and build a bootselecting MBR (i386).
1999-04-15 22:31:23 +00:00
e524714ca8
Update for sparc64.
1999-04-09 16:01:34 +00:00
de8c37eadc
Update a pasto-ed comment.
1999-04-09 16:00:17 +00:00
3cf54e49e9
If checklabel() failed, the label has not been written, so exit(1).
1999-04-09 10:06:18 +00:00
51ec106561
Plug a file descriptor leak.
1999-04-09 07:29:43 +00:00
d55756227f
!silent -> verbose, to make it compile again (there is no "silent")
1999-04-08 19:19:57 +00:00
92003e043a
If there is no /etc/ld.so.conf, it is not a fatal error. Correct the return
...
value from the function so that the exit value to the shell is correct.
1999-04-08 13:27:38 +00:00
1cd395375d
1, 2, 3 and.. 4!
1999-04-06 20:24:37 +00:00
b22750720f
change:
...
.Sh "SEE ALSO"
to:
.Sh SEE ALSO
The doc macros check for the latter (actually just for 'SEE' as the first
argument to .Sh) to set the section header SEE ALSO flag, which modifies
some behaviour (e.g. references done with .Rs/.Re).
1999-04-06 04:54:19 +00:00
9164307eaf
instead of coding an alpha boot block checksum routine here, use
...
the macro now provided by disklabel.h
1999-04-05 02:50:52 +00:00
8d5d550e54
Define __POOL_EXPOSE for this nlist-groveling program.
1999-04-01 09:12:21 +00:00
20a608fe88
revert the previous changes that removed special cased ioctls for ISO
...
stuff.
1999-04-01 08:12:23 +00:00
f9daa9044a
Correct data checksum to take ifile indirect block into account, if it exists
1999-03-30 19:04:50 +00:00
479f35bc93
Make the usage string match the man page.
1999-03-30 17:32:44 +00:00
efffe046a2
Move COPTS to CPPFLAGS. Nuke some no-longer needed compile options.
1999-03-26 00:46:05 +00:00
c2408285ae
Nuke unused code.
1999-03-26 00:45:01 +00:00
6b8114413a
Enable lmcctl
1999-03-25 04:08:29 +00:00
07c2411233
Add lmcctl, to configure lmc driver. Reason it belongs in /sbin is that
...
it might need to be run before /usr is mounted.
1999-03-25 04:05:36 +00:00
22f9ed8d9b
Make it work for both elf and a.out
1999-03-24 16:02:41 +00:00
68d6f4bf44
Remove spurious .ne's.
1999-03-24 06:27:49 +00:00
66902a3cfd
Remove blank lines.
1999-03-24 06:14:18 +00:00
210c7f5748
printf format fixes for Alpha.
1999-03-24 05:32:23 +00:00
491d912f59
Implement a read cache, as announced on tech-userlevel. Default is 32k
...
read buffer size, 512 buffer or 15% of the user memory. Can be changed
with the -k and -s options.
1999-03-23 14:22:59 +00:00
cc2c568d66
Revert cast to (int) that caused core-dumps.
1999-03-22 10:25:23 +00:00
9dbddb5d81
Add "-l" to "SYNOPSIS" section and use same order as "slattach" when
...
printing command line usage.
1999-03-19 21:18:32 +00:00
d5c144cf97
"LFS" really stands for "Log-*structured* File System"
1999-03-19 17:29:44 +00:00
14c9d1eedb
Fixes for newfs_lfs on partitions that would require writing an indirect
...
block on the Ifile (>~4Gb with standard block/segment size).
1999-03-19 17:28:19 +00:00
8ca743b6f3
Goodbye: newlfs
...
Hello: newfs_lfs, fsck_lfs
1999-03-18 21:54:47 +00:00
0a849c918b
Change name of newlfs to newfs_lfs.
1999-03-18 17:18:04 +00:00
9f7f3ce5d6
wrong order of initializations fixed
1999-03-18 07:14:53 +00:00
369e9cadf8
Initial checkin of fsck_lfs. This version cannot do any repair (-p flag
...
does nothing, and one of -p or -n is required) but can be useful as a
diagnostic tool.
1999-03-18 02:02:18 +00:00
f2c170eda0
Modify newfs so that the root node (and lost+found dir, if created)
...
of the new fs has uid.gid equal to the euid.egid of the process
which made it. This change permits users who have write access to
a device (say a floppy) to create a filesystem that, when mounted,
they have write access to.
This change closes PR bin/5990 from jbernard@ox.mines.edu , and is also the
change requested in PR bin/6276 from "Charles M. Hannum" <mycroft@netbsd.org>
1999-03-16 21:52:34 +00:00
d6f9f0986b
Remove some extra spaces.
1999-03-15 23:20:23 +00:00
988bdf8e19
Modify how the byteswapping of the cylinder summaries is handled. If we
...
need to swap, allocate a buffer for the swapped summaries rather than using
writebuf. The latter is fixed at 64k, which is only enough room to hold
4096 summaries. Creating an fs with more results in a buffer overrun.
First noted by Matt Jacob mjacob@netbsd.org , and fixed by Albeaus
Bayucan, bayucan@nas.nasa.gov . Minor mods by me.
1999-03-11 20:23:58 +00:00
fa45851f9b
Add missing .El line.
1999-03-10 05:14:51 +00:00
97bbd0e85a
Changes corresponding to new kernel LFS. Changed default block/frag sizes
...
to 8k/1k. Allow the possibility of writing larger filesystems by writing
the on-inode indirect block of the Ifile.
1999-03-10 00:43:33 +00:00
95086b8941
Add missing .El
1999-03-10 00:08:33 +00:00
1746034b3e
Handle "nodump" flag on directories, by not dumping any files or directories
...
under it. Based on some parts of PR 6705 by Brian Grayson.
In the Makefile, add (commented out) debug options that can be turned on.
1999-03-09 17:25:52 +00:00
4656cdfb18
Add a [-n] option, which allows to examine a fs without altering it.
...
Add a 'blks' command, which lists the blocks address of a file.
1999-03-09 16:11:47 +00:00
79b9ef47d2
Don't bother doing stddev calculation when n==1, since that results in
...
a computation of 0.0/0.0.
On IEEE systems you get a NaN from this; non-IEEE systems probably
give you a SIGFPE.
1999-03-08 01:16:20 +00:00
f6590b22cd
Clean up SYNOPSIS formatting.
1999-03-07 11:02:05 +00:00
17ab98299b
Fix minor formatting error.
1999-03-06 11:57:20 +00:00
4300219122
Fix minor formatting error.
1999-03-06 11:51:48 +00:00
f4609c553d
Typo fixed
1999-03-04 03:03:15 +00:00
4c1c1b0439
Slightly more useful error messages
1999-03-04 03:02:43 +00:00
53d349a107
Update for recent changes: component labels, clean bits, adding hot
...
spares, and rebuilding components in-place. Re-arrange the
letters/options to make more sense (and make better use of the alphabet).
1999-03-02 03:13:59 +00:00
91d6272def
flags and type are seperate now
1999-02-28 17:42:37 +00:00
c805ae93c2
Crash dumps should *not* be world readable.
1999-02-27 20:40:30 +00:00
bce8ed1c8e
Once more around the hickory shrub. Faster and simpler stddev calculation from
...
Bill Studenmund.
1999-02-25 19:07:15 +00:00
c650920100
LP64 tweaks.
1999-02-25 11:03:22 +00:00
57f33ecab4
LP64 tweak in printf(3) instance
1999-02-25 10:56:47 +00:00
1b92119539
Fix calculation of standard deviation. From Brian C. Grayson <bgrayson@orac.ece.utexas.edu>
1999-02-25 03:35:34 +00:00
12711b010a
Add code from Daniel Hagerty <hag@ai.mit.edu> to print standard deviation
...
when printing out final statistics line.
Closes PR bin/6198
1999-02-24 19:31:38 +00:00
d3c740d725
Code to check if a cooked device was specified was failing even if the
...
cooked device was opened successfully. Also fix a typo.
Fixes second part of PR bin/6883 for Soren S. Jorvang <soren@t.dk>
1999-02-24 18:51:39 +00:00
14fe747212
Code to check for cooked device names was failing even if it succeeded in
...
opening the cooked device. Also some typos.
Fixes part of PR bin/6883 from Soren S. Jorvang.
1999-02-24 18:49:14 +00:00
ae9b468dbe
Clean things up a bit. Teach raidctl a little about component labels
...
and hot-adding of spares. New code is there, but not enabled (yet).
1999-02-24 00:03:12 +00:00
bdadd56346
add a new fstab type "dp" for the user-specified dump device.
...
change swapctl -A to see this and add it via swapctl(2). also
add a new swapctl -D <device> to change the dump device on the
fly.
1999-02-23 17:00:53 +00:00
ca98b383fd
Oops remove WARNS=1
1999-02-23 10:51:53 +00:00
756b1291db
Resolve conflicts.
1999-02-23 10:47:39 +00:00
9a58d580cd
Add note about LD_PRELOAD
1999-02-22 23:07:16 +00:00
73b35dd2b4
fix typo
1999-02-18 07:54:33 +00:00
1bb2b4dd78
Properly handle FIFO (linux seems to puts something in the block addr fields
...
here) and a new field that can be different in the master superblock and
its first copy. From Tim Shepard.
1999-02-17 13:11:19 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
9a8b75daeb
add BeOS entry, from URA Hiroshi, PR 6974
1999-02-09 19:11:46 +00:00
4a3cd0cce2
Make quoted strings work. (don't set the high bit of each character)
1999-02-09 08:55:24 +00:00
f0a4bb6818
Use the drive parameter from the partition table
...
to support booting from the second disk.
1999-02-08 21:52:43 +00:00
0c92f24ea3
Numbers 0..9 must be treated as keysyms depending on context. Allow
...
`unknown_%d' for keysym with value `%d' so wsconsctl may read its own
output. Closes PR 6888.
1999-02-08 11:08:23 +00:00
67b7e0e590
Do not create more then LFS_MAXNUMSB superblocks.
...
Do not modify superblock fields after computing its checksum.
Write the last two superblocks to disk, too.
1999-02-04 22:47:48 +00:00
b86771c393
Use off_t where appropriate. Mostly from PR 5257 by Kazushi (Jam) Marukawa.
1999-02-04 22:25:22 +00:00
068fe3dab2
Add missing NetBSD RCS ID's! Thanks to SAITOH Masanobu (msaitoh@netbsd.org)
...
for pointing this out.
1999-02-04 14:50:31 +00:00
521469b010
Xref wscons wsconscfg wsfontload
1999-02-03 21:05:14 +00:00
62b7296fa5
Eliminate unused period.
1999-02-01 23:43:43 +00:00
c3d84360ae
Check malloc's return value before using the pointer.
1999-02-01 15:20:14 +00:00
507f116754
s/.Ic/.Cm/
1999-01-31 02:56:39 +00:00
0287662346
Add the ldconfig SUBDIR for all platforms so ldconfig(8) is available on
...
a shared /usr/share directory.
src/sbin/ldconfig/Makefile has allready an check to build the ldconfig
programm only on a.out platforms.
1999-01-30 21:16:33 +00:00
00e131aa47
Fix some roff bugs.
...
We should use 'Ic' for internal command.
1999-01-30 10:22:45 +00:00
faf59c0aba
Initialize drive number in DL (not done by some BIOSs).
...
If you want to use 32-bit addresses, be sure to init the high bits, too.
Some additional register saves around BIOS calls (just in case).
1999-01-28 14:14:04 +00:00
fe8e643590
Use <sys/disklabel_mbr.h>
1999-01-27 22:04:51 +00:00
3a6110fd02
Use <sys/disklabel_mbr.h>.
1999-01-27 21:41:31 +00:00
e8d64a5862
Never used, and certainly no longer needed.
1999-01-26 02:46:26 +00:00
543c143bd8
Take care of a few minor things due to the major RAIDframe cleanup.
...
Again, no functionality changes.
1999-01-26 02:40:02 +00:00
eab4c5009b
Add a -y flag to "bim" to assume a yes response to any questions bim might
...
ask the user. For use in sysinst, and other scripts.
1999-01-25 22:42:11 +00:00
3117e34c17
Add /proc/#/map.
1999-01-25 03:35:47 +00:00
832bb22922
Enable non-cylinder-aligned partition warning on sparc[64] & sun3.
...
See also PR#6853.
1999-01-21 11:58:00 +00:00
dbba3dce54
update for changes to the ccd_softc.
1999-01-21 08:48:46 +00:00
257673aaae
Include "disktab.h" to get prototype for getdiskbyname().
1999-01-19 22:23:36 +00:00
3ef6c36461
Include "disktab.h" to get prototype for getdiskbyname().
1999-01-19 19:34:50 +00:00
593d6c65b9
Add '-f disktab' option to disklabel, via lib/6623 from
...
Greg A. Woods <woods@most.weird.com>. (Very) slightly tweaked disklabel.8
1999-01-19 06:24:08 +00:00
482f72a42c
no need for CWARNFLAGS; ../Makefile.inc sets WARNS=1
1999-01-18 04:48:01 +00:00
3740dde63b
Allow CFLAGS to be set in /etc/mk.conf
1999-01-17 18:53:59 +00:00
3e3f9c7795
#include machine/bswap.h and remove -lutil.
1999-01-15 13:32:05 +00:00
0c70fedcac
Allow modload to load symbols for use by DDB.
1999-01-13 23:07:30 +00:00
93bf4aae36
recover from errno.h changes
1999-01-12 22:58:10 +00:00
48ff43e0e2
Add an EXAMPLES and ERRORS section to the manpage to partially fix
...
PR# 6121 by Charles M. Hannum. Someone else will have to do the
fixing to mountd's diagnostics.
1999-01-12 08:55:58 +00:00
ea086c5c52
Update for changes to ccdvar.h
1999-01-12 00:22:00 +00:00
d89ed08e6d
Make keysym.h depend on dev/wscons/wsksymdef.h.
1999-01-10 18:05:49 +00:00
8305a06f33
Fix tpyo.
1999-01-10 01:34:37 +00:00
5b05a0328e
s/1998/1999/
1999-01-03 14:33:44 +00:00
2faa2d1ff5
add support for '-L label', which file(1) and restore(1) can extract from the
...
header. mostly based on [bin/6715] from Brian Grayson <bgrayson@ece.utexas.edu>
old filesystems don't have fs_qbmask and fs_qfmask set in the superblock;
fudge them as per code in /sys/ufs/ffs/ffs_vfsops.c::ffs_oldfscompat().
bug and suggested fix from Robert Elz <kre@munnari.OZ.AU> in [bin/6610]
XXX: there may be other variables required as well...
1999-01-03 02:17:46 +00:00
21ae292644
add support for '-L label', which file(1) and restore(1) can extract
...
from the header.
mostly based on [bin/6715] from Brian Grayson <bgrayson@ece.utexas.edu>
1999-01-03 02:17:45 +00:00
75ea7b3f7e
user friendly enhancments.
...
reworked from [bin/6710] by Brian Grayson <bgrayson@ece.utexas.edu>
1999-01-03 01:50:34 +00:00
f274a1c1c5
Update for the 1990s: don't try to pass an integer in a pointer in ksym2name().
...
Makes this build on the alpha.
1999-01-02 19:01:12 +00:00
46ce633a7b
Add reference to "st(4)" as suggested by Brian Grayson in PR bin/6713.
1999-01-02 16:28:39 +00:00
a971be193b
Add USB keyboard type.
1998-12-30 19:15:11 +00:00
44df4dcc85
Add a wscons display type `unknown' that the generic VGA driver can
...
return until someone fixes it for real.
1998-12-30 13:54:03 +00:00
0ae031028d
Add a special wsmouse type for USB mice.
1998-12-30 13:14:21 +00:00
aa68ddf736
Remove a slight ambiguity in the flag description.
1998-12-30 12:59:58 +00:00
2eb5d54614
Display usage information if called without arguments.
1998-12-29 22:40:20 +00:00
6ac29b4d09
Add subdir wsconsctl.
1998-12-28 14:03:27 +00:00
04ee2ece33
wsconsctl(8) - a program to manipulate wscons devices.
...
- lacks wsdisplay support (driver needs work on ioctls).
- man page needs work.
1998-12-28 14:01:16 +00:00
5f22ea3a31
fix estimate of blocks for subsets.
...
fix from Brian Grayson <bgrayson@ece.utexas.edu> in [bin/6607]
1998-12-28 13:38:29 +00:00
f7514cc95c
typo: should be loose source routing
1998-12-22 16:36:41 +00:00
6f35df7bfe
Only build ldconfig on a.out platforms. Everyone else still builds the
...
manual page.
1998-12-17 22:23:44 +00:00
abccd09fe5
Adapt to new location in `src/sbin'.
1998-12-15 22:49:42 +00:00
8b230a2eff
Build ldconfig on non-ELF platforms.
1998-12-15 22:45:16 +00:00
fc2f406a64
Pull in proper headers; deal with compiler warnings; miscelleneous KNF.
1998-12-15 22:27:14 +00:00
fd4d2bc838
Typo
1998-12-15 16:07:24 +00:00
484162b815
Do this for ext2fs as well, because Manuel said so.
1998-12-02 16:15:10 +00:00
7171fafd1d
Add support for a new flag: "nodevmtime". This sets the MNT_NODEVMTIME mount
...
flag.
1998-12-01 23:20:43 +00:00
f53f6fbf73
Add mknod <name> p which creates a named pipe. There is no real reason for
...
a separate mkfifo program and there is prior art.
1998-11-24 22:56:26 +00:00
f95d18485e
- document 'p' file type.
...
- fix stale documentation about the location of the major/minor device
tables in the kernel.
1998-11-24 22:55:23 +00:00
2e09168cb1
Implement a new command: "checkpower". Returns the current power management
...
mode of an ATA device.
1998-11-23 23:02:58 +00:00
da5f0873c9
fix compile errors on the alpha.
1998-11-23 00:18:40 +00:00
73c0a4420d
s/ and and / and /
1998-11-22 22:27:32 +00:00
1bb90faab4
testo. We want to source /etc/rc.shutdown.
...
Fixes PR #6474 .
1998-11-22 19:13:45 +00:00
1074143fcc
Fix a warning that shows up on big-endian machines.
1998-11-20 18:27:40 +00:00
d5b0705044
wdctl -> atactl
1998-11-19 23:54:59 +00:00
ca505b6b88
Build wdctl(8).
1998-11-19 19:52:25 +00:00
5700b6e15f
wdctl(8) - A command for manipulating WD/IDE/ATA devices.
...
Currently only understands "identify" and the power management command set.
Code has been liberally borrowed from scsictl(8).
1998-11-19 19:50:31 +00:00
91395a8690
delete .TP (because this document is written in "mdoc" format)
1998-11-17 21:02:38 +00:00
f6f55150e7
document ipf change at securelevel >= 2
1998-11-14 07:47:36 +00:00
88aaa797c9
reflect new securelevel 2 changes
1998-11-14 07:25:35 +00:00
566ff31cb7
When downgrading from 'highly secure' mode (securelevel >= 2) to 'insecure' mode (securelevel 0) and the root password is set, always require it before giving a shell on the console. Reasoning: if an attacker has access to the machine console, he doesn't necessarily have access to the hardware itself; on a 'highly secure' machine, we may as well make his life hard.
1998-11-14 07:17:58 +00:00
78aeeb96c6
Fix typo 'with routing loop' to 'with a routing loop'
1998-11-13 22:06:56 +00:00
ed77a60f62
Oops. Forgot the man-page for 'raidctl' when the rest of 'raidctl' went in.
1998-11-13 13:16:46 +00:00
0abf7b19d0
Added raidctl to the list of things to build.
1998-11-13 04:35:04 +00:00
f675e35d77
RAIDframe, version 1.1, from the Parallel Data Laboratory at
...
Carnegie Mellon University. Full RAID implementation, including
levels 0, 1, 4, 5, 6, parity logging, and a few other goodies.
Ported to NetBSD by Greg Oster.
raidctl is our userland configuration tool for RAIDframe.
1998-11-13 04:34:02 +00:00
f023958a87
CCDF_MIRROR is nuked from orbit.
1998-11-13 00:27:04 +00:00
7b57bf6d78
Adjust for DKTYPENAME changes.
1998-11-12 16:19:47 +00:00
c1425134ae
Simple support for formatting a SCSI disk. This will be enhanced in
...
the near future.
1998-11-12 01:16:08 +00:00
9fe4d42638
Set otherwise-unused global variable `disksectors' to disklabel.d_secperunit.
...
Change fdisk -S to emit disksectors as DLSIZE (for benefit of sysinst.)
1998-11-08 00:29:08 +00:00
7f1ed758a3
char -> unsigned char
1998-11-06 16:52:42 +00:00
00c4adc933
Explicitly zero "node" before we start using it.
1998-11-03 18:14:55 +00:00
7404107445
Run /etc/rc.shutdown when the final shutdown time has come.
...
Thanks to Ted Lemon for helping with my English.
1998-10-29 20:12:56 +00:00
oster