pr_input is currently called in softint. Some pr_input such as ICMP, ICMPv6
and CARP can add/delete/update IP addresses and routing table entries. For
example, icmp6_redirect_input updates an a routing table entry and
nd6_ra_input may delete an IP address.
Basically such operations shouldn't be done in softint. That aside, we have
a reason to avoid the situation; psz/psref waits cannot be used in softint,
however they are required to work in such pr_input in the MP-safe world.
The change implements the workqueue pr_input framework called wqinput which
provides a means to defer pr_input of a protocol to workqueue easily.
Currently icmp_input, icmp6_input, carp_proto_input and carp6_proto_input
are deferred to workqueue by the framework.
Proposed and discussed on tech-kern and tech-net
- Don't hold softnet_lock in some functions if NET_MPSAFE
- Add softnet_lock to sysctl_net_inet_icmp_redirtimeout
- Add softnet_lock to expire_upcalls of ip_mroute.c
- Restore softnet_lock for in{,6}_pcbpurgeif{,0} if NET_MPSAFE
- Mark some softnet_lock for future work
See the following descriptions for details.
Proposed on tech-kern and tech-net
Overview
--------
We protect the routing table with a rwock and protect
rtcaches with another rwlock. Each rtentry is protected
from being freed or updated via reference counting and psref.
Global rwlocks
--------------
There are two rwlocks; one for the routing table (rt_lock) and
the other for rtcaches (rtcache_lock). rtcache_lock covers
all existing rtcaches; there may have room for optimizations
(future work).
The locking order is rtcache_lock first and rt_lock is next.
rtentry references
------------------
References to an rtentry is managed with reference counting
and psref. Either of the two mechanisms is used depending on
where a rtentry is obtained. Reference counting is used when
we obtain a rtentry from the routing table directly via
rtalloc1 and rtrequest{,1} while psref is used when we obtain
a rtentry from a rtcache via rtcache_* APIs. In both cases,
a caller can sleep/block with holding an obtained rtentry.
The reasons why we use two different mechanisms are (i) only
using reference counting hurts the performance due to atomic
instructions (rtcache case) (ii) ease of implementation;
applying psref to APIs such rtaloc1 and rtrequest{,1} requires
additional works (adding a local variable and an argument).
We will finally migrate to use only psref but we can do it
when we have a lockless routing table alternative.
Reference counting for rtentry
------------------------------
rt_refcnt now doesn't count permanent references such as for
rt_timers and rtcaches, instead it is used only for temporal
references when obtaining a rtentry via rtalloc1 and rtrequest{,1}.
We can do so because destroying a rtentry always involves
removing references of rt_timers and rtcaches to the rtentry
and we don't need to track such references. This also makes
it easy to wait for readers to release references on deleting
or updating a rtentry, i.e., we can simply wait until the
reference counter is 0 or 1. (If there are permanent references
the counter can be arbitrary.)
rt_ref increments a reference counter of a rtentry and rt_unref
decrements it. rt_ref is called inside APIs (rtalloc1 and
rtrequest{,1} so users don't need to care about it while
users must call rt_unref to an obtained rtentry after using it.
rtfree is removed and we use rt_unref and rt_free instead.
rt_unref now just decrements the counter of a given rtentry
and rt_free just tries to destroy a given rtentry.
See the next section for destructions of rtentries by rt_free.
Destructions of rtentries
-------------------------
We destroy a rtentry only when we call rtrequst{,1}(RTM_DELETE);
the original implementation can destroy in any rtfree where it's
the last reference. If we use reference counting or psref, it's
easy to understand if the place that a rtentry is destroyed is
fixed.
rt_free waits for references to a given rtentry to be released
before actually destroying the rtentry. rt_free uses a condition
variable (cv_wait) (and psref_target_destroy for psref) to wait.
Unfortunately rtrequst{,1}(RTM_DELETE) can be called in softint
that we cannot use cv_wait. In that case, we have to defer the
destruction to a workqueue.
rtentry#rt_cv, rtentry#rt_psref and global variables
(see rt_free_global) are added to conduct the procedure.
Updates of rtentries
--------------------
One difficulty to use refcnt/psref instead of rwlock for rtentry
is updates of rtentries. We need an additional mechanism to
prevent readers from seeing inconsistency of a rtentry being
updated.
We introduce RTF_UPDATING flag to rtentries that are updating.
While the flag is set to a rtentry, users cannot acquire the
rtentry. By doing so, we avoid users to see inconsistent
rtentries.
There are two options when a user tries to acquire a rtentry
with the RTF_UPDATING flag; if a user runs in softint context
the user fails to acquire a rtentry (NULL is returned).
Otherwise a user waits until the update completes by waiting
on cv.
The procedure of a updater is simpler to destruction of
a rtentry. Wait on cv (and psref) and after all readers left,
proceed with the update.
Global variables (see rt_update_global) are added to conduct
the procedure.
Currently we apply the mechanism to only RTM_CHANGE in
rtsock.c. We would have to apply other codes. See
"Known issues" section.
psref for rtentry
-----------------
When we obtain a rtentry from a rtcache via rtcache_* APIs,
psref is used to reference to the rtentry.
rtcache_ref acquires a reference to a rtentry with psref
and rtcache_unref releases the reference after using it.
rtcache_ref is called inside rtcache_* APIs and users don't
need to take care of it while users must call rtcache_unref
to release the reference.
struct psref and int bound that is needed for psref is
embedded into struct route. By doing so we don't need to
add local variables and additional argument to APIs.
However this adds another constraint to psref other than
reference counting one's; holding a reference of an rtentry
via a rtcache is allowed by just one caller at the same time.
So we must not acquire a rtentry via a rtcache twice and
avoid a recursive use of a rtcache. And also a rtcache must
be arranged to be used by a LWP/softint at the same time
somehow. For IP forwarding case, we have per-CPU rtcaches
used in softint so the constraint is guaranteed. For a h
rtcache of a PCB case, the constraint is guaranteed by the
solock of each PCB. Any other cases (pf, ipf, stf and ipsec)
are currently guaranteed by only the existence of the global
locks (softnet_lock and/or KERNEL_LOCK). If we've found the
cases that we cannot guarantee the constraint, we would need
to introduce other rtcache APIs that use simple reference
counting.
psref of rtcache is created with IPL_SOFTNET and so rtcache
shouldn't used at an IPL higher than IPL_SOFTNET.
Note that rtcache_free is used to invalidate a given rtcache.
We don't need another care by my change; just keep them as
they are.
Performance impact
------------------
When NET_MPSAFE is disabled the performance drop is 3% while
when it's enabled the drop is increased to 11%. The difference
comes from that currently we don't take any global locks and
don't use psref if NET_MPSAFE is disabled.
We can optimize the performance of the case of NET_MPSAFE
on by reducing lookups of rtcache that uses psref;
currently we do two lookups but we should be able to trim
one of two. This is a future work.
Known issues
------------
There are two known issues to be solved; one is that
a caller of rtrequest(RTM_ADD) may change rtentry (see rtinit).
We need to prevent new references during the update. Or
we may be able to remove the code (perhaps, need more
investigations).
The other is rtredirect that updates a rtentry. We need
to apply our update mechanism, however it's not easy because
rtredirect is called in softint and we cannot apply our
mechanism simply. One solution is to defer rtredirect to
a workqueue but it requires some code restructuring.
This change makes struct ifaddr and its variants (in_ifaddr and in6_ifaddr)
MP-safe by using pserialize and psref. At this moment, pserialize_perform
and psref_target_destroy are disabled because (1) we don't need them
because of softnet_lock (2) they cause a deadlock because of softnet_lock.
So we'll enable them when we remove softnet_lock in the future.
Note that we leave the old list just in case; it seems there are some
kvm(3) users accessing the list. We can remove it later if we confirmed
nobody does actually.
Having a pointer of an interface in a mbuf isn't safe if we remove big
kernel locks; an interface object (ifnet) can be destroyed anytime in any
packet processing and accessing such object via a pointer is racy. Instead
we have to get an object from the interface collection (ifindex2ifnet) via
an interface index (if_index) that is stored to a mbuf instead of an
pointer.
The change provides two APIs: m_{get,put}_rcvif_psref that use psref(9)
for sleep-able critical sections and m_{get,put}_rcvif that use
pserialize(9) for other critical sections. The change also adds another
API called m_get_rcvif_NOMPSAFE, that is NOT MP-safe and for transition
moratorium, i.e., it is intended to be used for places where are not
planned to be MP-ified soon.
The change adds some overhead due to psref to performance sensitive paths,
however the overhead is not serious, 2% down at worst.
Proposed on tech-kern and tech-net.
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
IN_IFF_DETATCHED to mimic the IPv6 address behaviour.
Add SIOCGIFAFLAG_IN ioctl to retrieve the address flag via the
ifreq structure.
Add IPv4 DAD detection via the ARP methods described in RFC 5227.
Add sysctls net.inet.ip.dad_count and net.inet.arp.debug.
Discussed on tech-net@
KAME_IPSEC, and make IPSEC define it so that existing kernel
config files work as before
Now the default can be easily be changed to FAST_IPSEC just by
setting the IPSEC alias to FAST_IPSEC.
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.
from the forwarding table's users:
Introduce rt_walktree() for walking the routing table and
applying a function to each rtentry. Replace most
rn_walktree() calls with it.
Use rt_getkey()/rt_setkey() to get/set a route's destination.
Keep a pointer to the sockaddr key in the rtentry, so that
rtentry users do not have to grovel in the radix_node for
the key.
Add a RTM_GET method to rtrequest. Use that instead of
radix_node lookups in, e.g., carp(4).
Add sys/net/link_proto.c, which supplies sockaddr routines for
link-layer socket addresses (sockaddr_dl).
Cosmetic:
Constify. KNF. Stop open-coding LIST_FOREACH, TAILQ_FOREACH,
et cetera. Use NULL instead of 0 for null pointers. Use
__arraycount(). Reduce gratuitous parenthesization.
Stop using variadic arguments for rip6_output(), it is
unnecessary.
Remove the unnecessary rtentry member rt_genmask and the
code to maintain it, since nothing actually used it.
Make rt_maskedcopy() easier to read by using meaningful variable
names.
Extract a subroutine intern_netmask() for looking up a netmask in
the masks table.
Start converting backslash-ridden IPv6 macros in
sys/netinet6/in6_var.h into inline subroutines that one
can read without special eyeglasses.
One functional change: when the kernel serves an RTM_GET, RTM_LOCK,
or RTM_CHANGE request, it applies the netmask (if supplied) to a
destination before searching for it in the forwarding table.
I have changed sys/netinet/ip_carp.c, carp_setroute(), to remove
the unlawful radix_node knowledge.
Apart from the changes to carp(4), netiso, ATM, and strip(4), I
have run the changes on three nodes in my wireless routing testbed,
which involves IPv4 + IPv6 dynamic routing acrobatics, and it's
working beautifully so far.
