ragge
431121d46f
Fixes for new config.
1995-02-13 00:44:21 +00:00
mycroft
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
pk
e560d77223
Another Maxtor botch.
1995-02-09 10:23:14 +00:00
mycroft
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
mycroft
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
mycroft
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
mycroft
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
mycroft
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
mycroft
d8743f51a2
Add Exabyte 8200 to the list.
1995-02-01 09:37:54 +00:00
mycroft
c937d3b9f2
Patch from Wolfgang to fix a missing spl.
1995-02-01 09:32:45 +00:00
mycroft
52bacd79d6
Fix invocation of scsi_scsi_cmd(), per John Kohl.
1995-01-30 15:54:42 +00:00
mycroft
1076165d07
All revisions of the TDC 3600 are rogues.
1995-01-30 15:39:33 +00:00
mycroft
7639253b70
Finish last change.
1995-01-30 11:50:23 +00:00
mycroft
321b00bd07
Some drives don't grok START with LoEj=1, either.
1995-01-30 11:47:56 +00:00
mycroft
0ece1143f6
Set the LoadEject bit when issuing a START.
1995-01-30 11:37:17 +00:00
mycroft
9085638020
Some devices really do require the START before the PREVENT. This makes no
...
sense.
1995-01-30 11:34:25 +00:00
cgd
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
cgd
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
cgd
87ed227cb4
include files from the correct places.
1995-01-27 05:44:29 +00:00
mycroft
1611df6ae0
Update copyrights.
1995-01-26 12:05:49 +00:00
mycroft
b76a328caa
Redo the `wait for spin up' code. The Mach 3 method clearly doesn't work.
...
Also, rearrange the first open sequences a bit; SDEV_OPEN is no longer magic.
1995-01-26 11:56:51 +00:00
mycroft
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
mycroft
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
cgd
95afef4f1d
kill _PATH_VNTAB; it's no longer used by anything.
1995-01-25 04:46:30 +00:00
mycroft
66785ec427
Clean up deleted files.
1995-01-25 04:45:41 +00:00
cgd
d9f7c9f9be
vn -> vnd renaming, for consistency
1995-01-25 04:45:38 +00:00
mycroft
726fa4e94f
Do the PREVENT before the START.
1995-01-23 18:17:22 +00:00
mycroft
feb5b29596
Remove old, misleading comment.
1995-01-23 17:56:26 +00:00
mycroft
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
mycroft
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
mycroft
3dddacd1ce
Rearrange tests so offline' has higher priority than out of paper'.
1995-01-22 00:12:39 +00:00
mycroft
68c1a35cd9
Initialize host_stat and target_stat properly.
1995-01-18 04:20:16 +00:00
mycroft
52f079131b
Incorporate recent changes from Wolfgang. Recognize the 815.
1995-01-16 21:48:35 +00:00
mycroft
a6e7fe0d2a
If the disk reports a block size of 0, assume it really meant 512.
1995-01-16 21:40:17 +00:00
mycroft
4a1e51751b
Trivial simplification.
1995-01-16 21:34:10 +00:00
mycroft
e71e917e9d
Remove unused macros.
1995-01-16 21:31:34 +00:00
mycroft
85532dd4ce
Don't clear the debug flags when copying the prototype scsi_link.
1995-01-16 21:13:40 +00:00
mycroft
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
mycroft
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
mycroft
28775a6a5d
Add a DIAGNOSTIC check.
1995-01-13 14:38:13 +00:00
mycroft
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
mycroft
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
mycroft
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
mycroft
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
mycroft
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
mycroft
83a1c4799e
Add two more broken devices.
1995-01-12 10:25:44 +00:00
pk
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
mycroft
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
mycroft
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
mycroft
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
