everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding. Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes. Place items described
by the SCSI Primary Commands document into scsi_spc.h.
If the number of logical blocks exceeds the maximum value that is able to be
specified in the RETURNED LOGICAL BLOCK ADDRESS field, the device server
shall set the RETURNED LOGICAL BLOCK ADDRESS field to FFFFFFFFh. The
application client should then issue a READ CAPACITY (16) command (see 5.11)
to retrieve the READ CAPACITY (16) parameter data.
Implement this in scsipi_size().
First issue in kern/28514.
calling scsipi_make_xs() and scsipi_execute_xs(), instead push these into
scsipi_command. Make bustype_cmd and PHOLD/PRELE be called from
scsipi_execute_xs(). This allows us to create a xfer structure -- possibly on
the stack -- and call scsipi_execute_xs() directly.
scsipi_done() from their scsipi_request().
For this, add a struct scsipi_xfer * argument to scsipi_command().
If not NULL scsipi_command() will use this to enqueue this xfer, otherwise
it'll try to allocate a new one. This scsipi_xfer has to be allocated
and initialised by scsipi_make_xs() or equivalent.
In xxstart(), allocate a scsipi_xfer using scsipi_make_xs(), and if not NULL,
dequeue the buffer before calling scsipi_command(). This makes sure that
scsipi_command() will not fail, and also makes sure that xxstart() won't
be called again between the BUFQ_PEEK() and BUFQ_GET().
Fix "dequeued wrong buf" panics reported by Juergen Hannken-Illjes in
private mail and Andreas Wrede on current-users@.
Thanks to Jason Thorpe and Chuck Silver for review, and Andreas Wrede for
testing the patch.
OS needs such a hack, and the same drive works fine on Suns -- and is much
more likely to be a bug in the host adapter driver (which is corroborated by
the PQUIRK_NOLUNS).
ready. This avoids gratuitously starting the motor on floppy and CD-ROM
drives, and eliminates the need for the audio playing test in cdopen().
Therefore, also remove PQUIRK_NOSTARTUNIT.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
fine at U2W, but barf at U160, with different controllers. Unfortunately
sometimes just being initialized at U160 does the trick, so setting them
to lower speed in the BIOS may also be needed.
This eliminates problems where the underlying interrupt handler isn't the
specific layer calling scsipi_complete() for a given scsi transaction.
This avoids deadlocks where the kthread that called the autoconf routines
to configure a scsibus shouldn't be the one put to sleep waiting on a
scsipi_complete (only the scsibus's kthread should be doing that).
To avoid jitter this will force the scsibus's to probe in the order they
run through autoconf (so machines with multiple bus's don't move sd* devices
around on every reboot).
Set this to dv_xname for scsibus and atapibus.
Set the name of the kernel thread to chan_name instead of controller's
name:channel number (so that we can use this name for controller-specific
threads).
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
using the ahc driver hang when probing scsi devices. The problem may be in
the ahc driver and not in this change, but back it out until this has been
fixed anyway.
called via a callout, kick the completion thread to run it for us (uses
a new flag, SCSIPI_CHAN_KICK).
If we've received BUSY status and we haven't started the completion
thread yet, don't freeze do a callout to scsipi_periph_timed_thaw which
then will try and kick the completion thread- instead treat the command
as if it were a polled command and just call delay for 1 second.
If DIAGNOSTIC is defined, and the periph qfreeze count is less than
zero, panic because some HBA has corrupted the periph structure's
accounting.
not present" don't print any message but still return ENODEV.
Use this in cd driver to allow open of character raw partition even if
the drive is empty (older drives fails at LOAD_UNLOAD time, newer
ones fail at TEST_UNIT_READY time).
