Commit Graph

119223 Commits

Author SHA1 Message Date
jdolecek
46bdb9f87e target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again
2003-10-19 17:22:42 +00:00
jdolecek
7c7f293c24 add platform MAKEDEV config file for unified MAKEDEV, based on info
from platform MAKEDEV script
2003-10-19 17:06:30 +00:00
jdolecek
e66b4221b3 add major for ksyms, and add the comment about MD major range 2003-10-19 16:51:04 +00:00
bouyer
0ca33bf011 Better late than never, add the chip-specific PCI ide controllers. 2003-10-19 15:41:23 +00:00
ragge
9cbcd57e32 Add lcspx. 2003-10-19 15:04:08 +00:00
ragge
90f561b5ff Add lcspx console device driver. 2003-10-19 15:03:25 +00:00
ragge
a893520c07 Add console text device driver for the LCSPX framebuffer. Really dump,
cannot change colours, and is really slow; I haven't found how to buffer
writes to the console yet.
2003-10-19 15:02:17 +00:00
ragge
9fb208fc0a Avoid the pvtable when devices are mapped. Fixes panics when unmapping
framebuffers.  Set aside space in kernel map for framebuffer on VS4k.
2003-10-19 14:58:22 +00:00
ragge
836c5d5ec4 Allow mmap() of /dev/mem. 2003-10-19 14:56:28 +00:00
ragge
89d60ed8ea Fetch SCSI controller ID from nvram for VS4k90 also. 2003-10-19 14:54:24 +00:00
lukem
d4a55392c2 Support MAKEVERBOSE.
Use BUILDSYMLINKS instead of home-grown equivalents.
2003-10-19 14:52:03 +00:00
he
848e3bb5cf Make the documentation match the source, and excise instances of
the RUNNING flag which existed in an earlier draft implementation.
Also, now that callout_stop() no longer clears INVOKING, reflect
that as well.
2003-10-19 14:37:12 +00:00
lukem
094017b449 add _MKMSGCREATE.m 2003-10-19 14:23:02 +00:00
lukem
252bf981a7 support MAKEVERBOSE and use ${HOST_SH} 2003-10-19 14:20:28 +00:00
lukem
e7cffe140c implement MAKEVERBOSE 2003-10-19 14:10:13 +00:00
lukem
87700a22c8 Implement MAKEVERBOSE.
Rework a bunch of make .for loops into sh for loops.

(XXX: This stuff could be implemented in a more efficient manner that
does a lot less of  SOMEMAKEVAR!=some shell command  , etc etc)
2003-10-19 14:08:50 +00:00
fredb
663be81e89 Allow for a syntax extension for "ntp.conf" with ntp 4.2.0. 2003-10-19 13:31:28 +00:00
fredb
b703c0fa68 Use "$command", instead of hard-coded "ntpdate", so that the user can
override the path using the usual mechanisms.
2003-10-19 13:23:57 +00:00
he
5e5a2bb96f Make this compile as a tool; we need to pick up the target's
sys/bootblock.h header in that case.
2003-10-19 11:34:27 +00:00
tsutsui
8d36037f37 Utilize bus_dma(9) functions more efficiently.
pcscp(4) is the first device driver I wrote about five years ago,
but I still have to learn about bus_dma(9) implementation...
2003-10-19 10:25:42 +00:00
lukem
fa6713d480 use the correct comment style... 2003-10-19 09:47:40 +00:00
wiz
b03b9579a7 Add MAKEDEV(8) for ibmnws. 2003-10-19 09:12:32 +00:00
wiz
21069b6a1b Add man8.ibmnws and MAKEDEV(8) for ibmnws. 2003-10-19 09:12:00 +00:00
wiz
a5e3bdad73 Add ibmnws {cat,html,man}8. 2003-10-19 09:08:40 +00:00
wiz
5e43ad3add Add 1.4.1 and 1.6.2. 2003-10-19 08:58:52 +00:00
wiz
ec09eb497f New sentence, new line. 2003-10-19 08:54:20 +00:00
wiz
8034863446 Add RCS Id. 2003-10-19 08:54:13 +00:00
manu
d77ec799a5 Support Darwin static binaries (I should say: support the only Darwin
static binary: otool). Dynamic binaires have a pointer to the Mach-O
header on the top of the stack, static binaries don't have this, and
having it produced a crash.

One bugfix: the EXEC_MACHO code assumes that entry = NULL means that
the entry point has not been found in the load commands seen so far.
Therefore we need to initialized entry to NULL if we want a static binary
to discover it. (dynamic binaries were forced to iscover it because when
the intepreter load command is found, entry is updated whatever its
value was before).

One hack: Both COMPAT_MACH and COMPAT_DARWIN are willing to run Mach-O
binaries. COMPAT_MACH fails for dynamic binaries because it cannot find
the interpreter in /emul/mach. For static binaires, it will accept them
(and for Darwin static binaries, this will cause a failure). Until we
rite a test for matchinf Darwin static binaries, just swap the order of
COMPAT_MACH and COMPAT_DARWIN in the exec switch so that COMPAT_DARWIN
is tried first (this will have the advantage of speeding up program
startup). EXECSW_PRIO_{FIRST_LAST} does not seem to work...
2003-10-19 07:52:22 +00:00
scw
175f717bf5 Be more careful about validating the user-specified geometry, otherwise
it's too easy to specify a geometry which will cause a divide by zero
elsewhere in the disklabel code.
2003-10-19 07:41:19 +00:00
christos
87b62b5af0 KNF:
- ansify
- no breaks after returns
- statics where needed
- no exit after errx
2003-10-19 07:34:38 +00:00
christos
52215a07e7 add rl_catch_signals 2003-10-19 06:28:35 +00:00
lukem
e08f429064 Add definitions for NetBSD versions:
1.4.1  1.4.2  1.5.1  1.5.2  1.5.3  1.6.1  1.6.2  2.0
2003-10-19 06:20:20 +00:00
lukem
8233be784c support MAKEVERBOSE 2003-10-19 06:12:07 +00:00
lukem
a414e34de5 support MAKEVERBOSE and use ${HOST_SH} 2003-10-19 06:11:38 +00:00
lukem
b606e4ebf0 support MAKEVERBOSE 2003-10-19 06:10:41 +00:00
lukem
6672bff7fc rework how cfparse.y is generated 2003-10-19 06:09:17 +00:00
lukem
eae82b3d06 #define _PATH_BIN_RCMD in common_source/pathnames.h rather than using
wacky Makefile rules to compile rcmd.c
2003-10-19 05:51:44 +00:00
lukem
8545f3b03c Switch back to using YHEADER instead of custom yacc rules.
We use build.sh to support hosting on older NetBSD releases...
2003-10-19 05:30:30 +00:00
lukem
d931e2e741 support MAKEVERBOSE 2003-10-19 05:24:53 +00:00
lukem
4afe0be65c support MAKEVERBOSE for .txi.info .texi.info .texinfo.info 2003-10-19 04:54:53 +00:00
lukem
ddff99b7f4 rework to use the newer _MKMSGCREATE (et al) macros 2003-10-19 04:45:01 +00:00
lukem
c545cc169d support MAKEVERBOSE 2003-10-19 04:30:30 +00:00
lukem
a694177df5 support MAKEVERBOSE and use ${HOST_SH} 2003-10-19 04:25:00 +00:00
lukem
87755a0463 support MAKEVERBOSE and use ${HOST_SH} 2003-10-19 04:05:01 +00:00
lukem
bef75a2e23 add _MKMSGINSTALL.m 2003-10-19 03:53:33 +00:00
matt
daa035e3e8 Teach build.sh about the ibmnws port. 2003-10-19 03:37:36 +00:00
matt
a9baced49d NWDO for ibmnws. 2003-10-19 03:37:16 +00:00
matt
14573b928a Add ibmnws specific files. (XXX someone should checkout MAKEDEV and make
it complies with how MAKEDEV is done now).
2003-10-19 03:36:45 +00:00
matt
10c0014b94 Add host tool version of ncdcs 2003-10-19 03:35:30 +00:00
matt
8d6789fc05 Add ncdcs utility (for ibmnws port). Calculates and writes the NCD checksum
used in kernel files.  Only built for ibmnws port.
2003-10-19 03:34:59 +00:00