00b821d6c2
Change mips __warn_references() macro to use the ELF warning features
...
in binutils 2.6 and (patched) gcc 2.7.2. Only works with gcc in ANSI C
mode, for now.
1995-12-15 01:17:04 +00:00
76063d53bb
Reverse pk's changes from 1.57; the faked cookies are not valid,
...
and are no longer necessary now that NFS provides cookies.
1995-12-14 18:44:44 +00:00
132f58bfc5
Call doshutdownhooks() before asking for a halt keypress.
1995-12-14 18:31:20 +00:00
28db87de35
Change pixel type from u_long to u_int32_t, to match rcons.
1995-12-14 16:27:33 +00:00
9ddf72180a
add 3C590 support to all generic and install kernels
1995-12-14 01:09:59 +00:00
7e6c169434
Return actual packet length in FIONREAD (noted by Bob Smart).
1995-12-13 23:47:40 +00:00
284c0cd0b1
Make `time difference' a signed quantity explicitly.
1995-12-13 23:38:10 +00:00
b7feb4a35e
Enable interrupts; some ROM versions apparently turn them off.
1995-12-13 23:35:18 +00:00
e7aba578d3
MicroVAX III support added.
...
Dummy match/attach routines for tmscp.
Conversion of uda.c towards new config.
1995-12-13 19:02:47 +00:00
56ad9078eb
MicroVAX III support added.
1995-12-13 18:57:57 +00:00
cf6e6c6ed4
waitabit() macro removed.
1995-12-13 18:56:01 +00:00
6ab4fc540f
Prevent against multiple includes.
1995-12-13 18:55:27 +00:00
dc9996e83e
A complete SCB struct included.
1995-12-13 18:54:56 +00:00
4f22cd5a71
Type change: u_int hoppaddr to void (*hoppaddr)();
1995-12-13 18:54:03 +00:00
902fd4cddf
PG_SHIFT -> PGSHIFT.
1995-12-13 18:53:15 +00:00
3307a6f67a
CPU dependent code moved out of cpu independent modules.
1995-12-13 18:50:11 +00:00
b7d05bc287
u_int -> pt_entry_t.
1995-12-13 18:47:59 +00:00
2962c5f6d6
MicroVAX III support added; now runs on VAX 3600/3800/3900 platforms.
1995-12-13 18:45:52 +00:00
486bcce207
Remove printf() that I forgot about.
1995-12-13 14:30:29 +00:00
405ac4248f
Fix from Paul Goyette to disable linked commands on drives that
...
reject them for simple commands. Leo W. reports that this does
not work for some systems. It's better than what we have now,
though. From Paul Goyette <paul@pgoyette.bdt.com>.
1995-12-13 03:48:07 +00:00
4b2a9a582d
Update from Bill Studenmund <wrstuden@loki.stanford.edu> with some minor
...
cleanup from me. Now supports serial console.
1995-12-13 03:09:57 +00:00
37b09a913d
Double ring limits from Bill Studenmund <wrstuden@loki.stanford.edu>.
1995-12-13 03:08:12 +00:00
a5c9872c60
Unneccessary.
1995-12-12 15:40:04 +00:00
c6d3b96520
Change "OS release" to 1.1A.
1995-12-12 02:05:14 +00:00
0585b39d85
use pcvt, with PCVT_NSCREENS=1 and PCVT_24LINESDEF.
1995-12-12 01:52:39 +00:00
7bb08a12f6
Make lewatchdog() take an int, not a short.
1995-12-11 19:48:53 +00:00
1094eb5008
Oops ... missed this file in the last round of device changes.
1995-12-11 19:41:47 +00:00
540dfebf15
Rather than using individual HP300 model names, map those model names to
...
properties such as "M68040" and "M68K_MMU_MOTOROLA", used to conditionally
compile code. This is more in-line with now the other m68k ports do it,
and makes it much easier to find "common ground" among them.
In locore.s, use the MMU-type constants defined my <machine/cpu.h> rather
than "expanded" values.
Because HP300-model names are mapped to CPU/MMU combinations in
<machine/cpu.h>, no change to kernel configuration will be necessary.
1995-12-11 17:09:09 +00:00
3bf97cdb69
Fix a type-size glitch caught by gcc 2.7.2.
1995-12-11 16:32:46 +00:00
524718f597
Adapt to changed mapiodev() interface.
1995-12-11 12:45:16 +00:00
d2ae46d04e
Agree with prototype.
1995-12-11 12:44:39 +00:00
0d1981416d
Adapt to changed mapiodev() interface.
1995-12-11 12:43:14 +00:00
f840d96cfe
Adapt to changed mapiodev() interface.
...
Use new DVMA routines.
1995-12-11 12:40:20 +00:00
8f162e4e25
mapdev() now takes a `struct rom_reg' argument to get access to `iospace'.
1995-12-11 12:34:36 +00:00
2b7034a493
The return of dvma_malloc/dvma_free in a different shape.
1995-12-11 12:32:56 +00:00
528ea56588
Change mapdev() and mapiodev() to take a `struct rom_reg', enabling the use
...
of IO spaces to construct device mappings.
1995-12-11 12:31:02 +00:00
51c8280df1
Prototype dvma helper functions `dvma_malloc()/dvma_free()'
1995-12-11 12:25:17 +00:00
89f8e05c10
Trim NULs, in addition to spaces, in scsi_strvis().
1995-12-11 04:43:01 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
d51f726204
Fix typo, and eliminate some unneeded local variables.
1995-12-11 02:30:44 +00:00
333f2e0065
Make several informational messages #ifdef LEDEBUG.
1995-12-11 02:21:56 +00:00
0267460c6c
Use the MI LANCE code.
1995-12-11 01:59:17 +00:00
5c50eeb245
Prevent possible race condition in ctx_alloc().
...
Remove some bogus casts.
1995-12-11 01:27:28 +00:00
7987c7fce9
Use `def_width' and `def_height' as default values when getting rom properties.
1995-12-10 22:55:32 +00:00
8dff161947
Make sure that the motor will be turned off when a floppy is inserted.
1995-12-10 14:25:12 +00:00
494a9b9eb9
Use the MI LANCE code.
1995-12-10 10:15:06 +00:00
77fce9fe33
Change format of probe messages slightly.
...
Add work-around for LANCE rev. C bug, iff LANCE_REVC_BUG is defined.
1995-12-10 08:55:07 +00:00
9ca6a401eb
Use the MI LANCE code.
1995-12-10 08:46:05 +00:00
f183fc14f7
If __FORK_BRAINDAMAGE, continue stuffing retval[1] for the benefit of main().
1995-12-10 08:26:02 +00:00
46366f34e7
Include vm.h, rather than guessing which files we need.
1995-12-10 06:50:58 +00:00
7877aa6eb5
Use the MI LANCE code.
1995-12-10 00:49:33 +00:00
b1c7779d0a
Prevent the msgbuf from getting trashed across reboots by moving avail_end
...
back one page.
1995-12-09 07:54:19 +00:00
3a0fa6f8ee
NISA --> NISADMA, per Neil McRae.
1995-12-09 07:39:02 +00:00
862bb3adc1
Pass the correct number of arguments to readdisklabel().
1995-12-09 07:31:03 +00:00
498f9ca1e7
Include /dev/io as one of the `kmem' devices.
1995-12-09 05:53:00 +00:00
6652367efa
(1) undef various EXEC_ cpp symbols before defining them, in case
...
they're already defined for some reason (this can happen
on the alpha, for example, which needs to define EXEC_ECOFF
in the std.alpha config file).
(2) minor spacing consistency.
1995-12-09 05:34:47 +00:00
76813521bb
Return 0 in the child, not the parent pid.
1995-12-09 05:00:27 +00:00
292120bf63
Define __FORK_BRAINDAMAGE.
1995-12-09 04:41:41 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
fee1a345eb
Only expect vm_fork() to return if __FORK_BRAINDAMAGE is defined.
...
Eliminate unused third arg to vm_fork().
1995-12-09 04:28:16 +00:00
af942a9add
Only expect vm_fork() to return if __FORK_BRAINDAMAGE is defined.
...
Use splstatclock() rather than splhigh() in one place.
Eliminate unused third arg to vm_fork().
1995-12-09 04:23:07 +00:00
bcd91943f8
Remove unused third arg to shmfork().
1995-12-09 04:12:56 +00:00
feb42498e3
If we abort, make sure to free ep_emul_arg.
1995-12-09 04:11:00 +00:00
00be80b604
Add a limfree(), and use it.
1995-12-09 04:09:32 +00:00
27b9d9f436
Eliminate an extra variable.
1995-12-09 04:07:41 +00:00
018fa71167
Eliminate bogus casts.
1995-12-09 04:05:52 +00:00
812fdf80d2
Reran makesyscalls.sh.
1995-12-09 04:04:45 +00:00
9df1f90849
We don't need a private version of fork() here any more.
1995-12-09 04:01:42 +00:00
7268bf552d
When unconfiguring a ccd, only free as many interleave indices as
...
were allocated, which may not be the same as the number of components
in the ccd. From Don Lewis <gdonl@gv.ssi1.com>. Fixes PR #1820 .
1995-12-08 19:13:26 +00:00
d7cef923ac
Centralize the HP-UX file flags translation stuff.
1995-12-08 07:54:43 +00:00
b0ca4831ea
Check in two changes I apparently overlooked the last time. "oops"
1995-12-08 07:45:31 +00:00
63a836a44a
Check return value from sendrecv so that ARP timeout does not cause
...
garbage to be entered into the ARP table. Also fix ARP_DEBUG code.
1995-12-08 04:12:53 +00:00
63e145ebd7
Correct error which caused truncation of port number on i386 (PR#1823)
1995-12-08 04:10:28 +00:00
5c482e804d
Don't forget to flush the cache in vunmapbuf().
1995-12-07 22:18:54 +00:00
1cd2ca323b
Remove a couple of now unneeded assignments.
1995-12-07 21:54:24 +00:00
b6c6d46a82
In sdminphys(), add a comment about the semantics of the "length" field
...
in a 6-byte read/write cdb (namely, length == 0 really means 256), and
that we handle this conservatively by limiting the transfer to 255 blocks.
*sigh* One just never knows how a pre-scsi-1 device is going to behave.
1995-12-07 19:46:00 +00:00
c9895db015
In both cd.c and sd.c:
...
If the read or write request can fit into a 6-byte cdb, then
use a 6-byte cdb, otherwise use the 10-byte as before.
In sd.c:
In sdattach(), make a note if the device is "ancient" (i.e.
inqbuf.version & SID_ANSII == 0).
Implement sdminphys(): if the device is "ancient", shorten the
transfer so it will fit into a 6-byte cdb.
These changes have eliminated the rejected read/write requests on my
Sun 3/60 with 2 ESDI disks behind an Emulex MD21.
1995-12-07 19:11:32 +00:00
c13dbbd1b4
Update the To.Do list.
1995-12-07 07:55:11 +00:00
65806fd730
When converting from termios to sgtty, if RAW is set, use the previous\
...
settings of LITOUT and PASS8, since these cannot be determined from the\
termios modes.
1995-12-07 00:53:29 +00:00
480398f38e
dvma_malloc => malloc/dvma_mapin. (not the most elegant solution, but it'll
...
have to do for now).
1995-12-06 22:40:22 +00:00
f6a3272e25
DVMA space is described by the variables `dvma_start' and `dvma_end'.
...
Prototype dvma_map*() routines.
1995-12-06 22:35:54 +00:00
7299c7a6c0
Have v[un]mapbuf() allocate from plain kernel map instead of dvma space.
...
Remove dvma_malloc/dvma_free; drivers should allocate kernel memory and
use dvma_mapin/dvma_mapout to double map it in DVMA space.
Make the resource map `dvmamap' responsible for all DVMA allocation.
The VM map `physmap' only serves the role of placeholder in the VM system.
1995-12-06 22:33:49 +00:00
87206673fb
Keymap for the Swedish HIL keyboard, from Tomas Tengling <ltt@cd.chalmers.se>.
1995-12-06 22:13:23 +00:00
785c98a0cc
Oops.
1995-12-06 00:38:11 +00:00
210b4d80ec
Make pmap_prefer() also return a preferred virtual address when there's no
...
associated physical page.
1995-12-05 23:01:39 +00:00
801712f01a
Extend use of vm_object_prefer() to vm_allocate_with_pager().
...
Make vm_object_prefer() call MD aligner for "pageless" objects too,
so we can have more control over the virtual address to be used.
Implementation could be simpler if we by-pass the object to mapped, but
we'd loose the ability to adapt alignment to objects that were previously
mmap'ed with MAP_FIXED on.
1995-12-05 22:54:36 +00:00
9c784e07c1
Fix the integer overflow problem in pmap_init() when the user PT map is
...
allocated, as noticed by Chuck Cranor. In addition to re-arranging
the assignment as suggested by Niklas Hallqvist, check to see if maxproc
is higher than the number of available user PTs. If it is, lower maxproc
to that value, the rationale being that it's much more desirable to have
fork() return EAGAIN than to have your system wedge.
XXX note that root can still raise maxproc with sysctl(2) later. It's
probably worth having further discussion about this issue, but until
everyone has time to think about it, this seems like an acceptable solution
for the time being.
1995-12-05 20:01:54 +00:00
e159767fed
Repeating my mistakes twice... I used sc-> in the pci probe routine
...
again, and it turned NetBSD in ostype[] to N^CtBSD... Thanks Charles (again)
Also call epstop() in the attach routine to make sure that the pci card
gets reset properly.
1995-12-05 03:30:15 +00:00
31f199d4e6
Added earlier forgotten MACHINE_ARCH, pointed out by Arne Henrik Juul.
...
Cleaned up a bit.
1995-12-04 22:32:53 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
fc587cf917
Something forgotten in the namespace changes.
1995-12-03 14:34:24 +00:00
70875fa68f
Return a more sensible errno when someone is trying to set the unsupported
...
mdmbuf option.
1995-12-03 14:32:39 +00:00
99e494a984
Fix from Niklas Hallqvist / Chuck Cranor / Michael Hitch / OpenBSD to avoid
...
integer overflow in initial pmap setup. Triggerred by high values for
maxusers.
1995-12-03 13:52:50 +00:00
52ec09e420
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
1995-12-02 18:21:49 +00:00
deb00c27b3
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to
the softc rather than a unit number.
Pointers to hardware and software constructs are now stored per port
in each instance of the softc (one softc per board) rather than indexed
by minor number.
1995-12-02 18:18:50 +00:00
41cf6f071f
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to the
softc rather than a unit number.
1995-12-02 18:15:50 +00:00
3ac76475ea
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting drivers prepared for new config.
1995-12-02 18:11:21 +00:00
de5ce5f48c
Change "hilloop" to "hilsoftc" and make slightly more new config-friendly.
...
Remove all uses of curproc.
1995-12-02 02:48:47 +00:00
b618522128
Make the DMA controller driver a little more new config-friendly. Still
...
more work to do, but this is a step in the right direction.
1995-12-02 02:46:45 +00:00
5f2ab2109f
Use files.fpe
1995-12-01 19:53:07 +00:00
ca1cc64e20
Remove forgotten #endif
1995-12-01 19:51:53 +00:00
45d824de05
DELUA/DENUA & DELQA/DEQNA Ethernet adapters converted to new config.
1995-12-01 19:37:55 +00:00
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
3fbc1f7e9b
Enable flock(2).
1995-12-01 07:26:58 +00:00
8a1606d530
Don't return `XS_DRIVER_STUFFUP' too easily; this can hose buffer cache
...
writes. Say XS_TIMEOUT in stead so the scsi code will retry.
1995-12-01 01:00:55 +00:00
fe934606c7
NBPG may not be computable by the preprocessor. Make "do clustered io"
...
a run-time decision. Note: the compiler can optimize it away.
1995-12-01 00:47:33 +00:00
e267646321
KNF-ify
1995-11-30 21:55:01 +00:00
291d8cbf3a
Add kernel option for separate {stat,prof}clock
1995-11-30 21:52:46 +00:00
10ebaa7036
Don't overwrite dirclust, it's needed later on
1995-11-30 19:00:57 +00:00
9dd5549e5d
Fix thinko with block boundaries in directories
1995-11-30 17:50:26 +00:00
c069674663
Handle PRU_CONTROL (David Maltz; PR#1664).
1995-11-30 16:42:18 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
7a7ca00077
Add quirk for Exabyte 8200/rev. 263H (from Paul Goyette; PR#1797).
1995-11-30 10:12:04 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
a2a4da4874
Merge changes from sun3 port; per Gordon.
1995-11-29 23:43:42 +00:00
ee08e9085b
Extend the size of the "soft" FIFOs which reportedly reduces the number
...
of FIFO overflows on high baud rates.
However, doing so on all 4 ports would cost a whopping 64KB (at 4096 entries
per FIFO) of kernel memory. So, the FIFOs are now allocated at attach time
allowing the size for the keyboard and mouse ports to be reduced (to 128)
which should be adequate for the 1200 baud they use.
1995-11-29 23:41:31 +00:00
3b2862c858
Make it work on little-endian monochrome buffers; per Ted.
1995-11-29 22:12:58 +00:00
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
f4d1bdb04f
Fix thinko in last
1995-11-29 18:28:51 +00:00
debbf2f60e
- Add support for Win'95 separate creation/modification/access timestamps
...
- Re-introduce lowercase filenames for non-Win'95-filesystems
1995-11-29 15:08:32 +00:00
87093145ce
Use bzero() instead of memset(..., 0, ...).
1995-11-29 06:12:08 +00:00
6e53c6a5fd
In probe[gs]et() there's no need to check against KERNBASE, as pointed
...
out by David Jones and Chris Torek.
1995-11-29 01:52:41 +00:00
e9a919b88f
Code from Jason to better configure /dev/fb.
1995-11-29 01:45:36 +00:00
ce474272f1
Prevent synch negotiation on ESP100 chips
1995-11-28 22:49:31 +00:00
9bf3251e46
Lots of major and minor bug fixes and changes.
...
- properly do MSG_IN handshaking, so we can actually receive multi-byte msgs.
- do synch negotiation (now that the above works).
- handle disconnects.
There are a few trial-and-error bits at points where the docs I have are
particularly ambiguous about the state of chip and/or SCSI bus.
Things to do:
- more cleanup
- deal with MSG_OUT phase better
- keep some "config reg 3" bits per target (ie. FASTCLK and FASTSCSI).
1995-11-28 20:49:12 +00:00
def161af38
Careful with signed chars (caddr_t *!).
...
Merge in 1.1 changes.
1995-11-28 20:26:59 +00:00
da66c0a255
Enable COMPAT_HPUX.
1995-11-28 08:48:18 +00:00
38b63746fb
Note the new status of COMPAT_HPUX, but keep is disabled by default.
1995-11-28 08:47:38 +00:00
0d02785d6c
Re-ran makesyscalls.sh; syscalls.conf and syscalls.master chagned.
1995-11-28 08:43:58 +00:00
0ec193c9b2
Get COMPAT_HPUX partially working on the hp300. Notable improvements:
...
* It compiles (and links).
* Make use of "/emul/hpux" where applicable.
* Untangle a bit, pulling some funtions from the monolithic
hpux_compat.c into hpux_file.c, hpux_exec.c, etc.
* Fix a couple of bugs.
Yet to do:
* Move hp300-specific functions into hp300/hp300/hpux_machdep.c.
* Make everything work properly (you laugh...)
These changes are sufficient to run some simple HP-UX 9.x executables,
including ls(1) (which will read password and group information from the
YP server correctly, albeit slowly), a simple "hello world", uname(1),
and a few other odds and ends. Dynamically linked executables work, and
demand-paging _seems_ to work properly. Major problems:
* socket and/or signal handling appears to need some work yet.
* 99% sure I didn't do exactly the right thing adjusting for the
fact that "kstack" is gone now.
* ktrace(1)'ing some executables (HP-UX telnet(1) is what I tried)
causes the HP-UX executable to dump core with a SIGSEGV for an
as of yet unknown reason.
This is mostly meant as a checkpoint/snapshot, to make it easier for others
to track progress on this code, and hack on it themselves. It's certainly
better off now than before.
1995-11-28 08:39:45 +00:00
de437ed1b6
Setup the stack gap for COMPAT_HPUX, too.
1995-11-28 08:16:47 +00:00
63b0022b86
Update a #include for the "new" location of HP-UX emulation code.
1995-11-28 08:12:37 +00:00
ffcccc41bd
Compile compat/hpux/hpux_exec.c and compat/hpux/hpux_file.c if COMPAT_HPUX
...
is defined.
1995-11-28 08:10:09 +00:00
a5d3f68110
Add hooks for COMPAT_HPUX.
1995-11-28 08:07:25 +00:00
29d9eeabd1
kill these. they're no longer used.
1995-11-27 23:28:00 +00:00
e2baea19f3
Make sure vt_coldinit() is called before vt_coldmalloc().
1995-11-26 21:01:16 +00:00
55980119ec
Remove some cruft
1995-11-25 10:39:57 +00:00
8b29652e06
Fix colormap initialization for monochrome pmax framebuffer
1995-11-25 10:38:42 +00:00
db99c1a30b
Provide compiler tool definitions for cross compilation.
1995-11-25 05:55:38 +00:00
afc45b4ab7
pull in ECOFF exec code with EXEC_ECOFF
1995-11-25 01:34:38 +00:00
93a78af882
no DDB
1995-11-25 01:32:34 +00:00
e6dc5f55db
update for am7990var.h, am7990.c changes
1995-11-25 01:31:09 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
57dc31272e
pull in ecoff_exec.c with 'options EXEC_ECOFF', as well as with compat
...
options, so that it can be used in kernels (e.g. alpha) w/o need for
compat options.
1995-11-25 00:37:39 +00:00
523c12167c
fix definition of nullcnpollc, and add a prototype for it.
1995-11-25 00:03:35 +00:00
540ab1b88d
since 'long's in this code are meant to be exactly 32-bits wide, use
...
'int32_t's instead, so that this code is usable on the alpha.
1995-11-24 23:50:51 +00:00
13bf4371ae
delete extra (blank) line in comment block
1995-11-24 23:45:40 +00:00
f5655b153b
fix paste-o
1995-11-24 22:13:08 +00:00
deb4082f80
wholesale update from my NetBSD/Alpha source tree. Includes:
...
Support for AXPpci CPUs,
Support for AlphaStation 600 CPUs,
new boot block structure, which requires an 'installboot'
program and works a lot like the NetBSD/sparc boot blocks.
1995-11-23 02:33:17 +00:00
5cd2526d5c
db_lastsym (cast from pointer) should be long not int. db_maxoff -> db_expr_t
1995-11-23 01:42:08 +00:00
b69dc1f62c
move ../sys/syscallargs.h out of the way when making new version,
...
just like we do for init_sysent.c, syscalls.c, and ../sys/syscall.h.
1995-11-22 23:11:32 +00:00
a321588516
update for new syscalls.master
1995-11-22 23:09:26 +00:00
a2ce90f34c
change definition of profil() to make it 64-bit friendly. This has
...
no practical consequence on 32-bit systems. old prototype was
int profil(char *, int, int, int), and new one is int profile(char *,
size_t, u_long, u_int). the size_t is the size of the buffer,
and the u_long is the 'starting offset'. (I changed the last int
to u_int, because it's treated as a u_int everywhere, and isn't
logically a signed value.)
1995-11-22 23:07:19 +00:00
895c6508ee
represent profiling size, scale more correctly (as size_t, u_int, resp.)
1995-11-22 23:01:53 +00:00
93d836857c
RAMDISK stuff.
1995-11-21 05:06:28 +00:00
447b897889
Define DST and TIMEZONE
1995-11-21 05:05:51 +00:00
e5a588356f
Small RAMDISK kernel.
1995-11-21 05:02:02 +00:00
369e3de013
Get rid of obsolete time specs.
1995-11-21 05:00:34 +00:00
f9ba6adcd7
Add rd_root.c from sun3.
1995-11-21 04:53:20 +00:00
0d91c3ff0b
Back the sccClkConst off to 115200 for several classes of machines.
1995-11-21 04:00:43 +00:00
9afe66efa5
Add rd support at the same address as the Sun3.
1995-11-21 03:39:45 +00:00
dfad729a16
make netinet work on systems where pointers and longs are 64 bits
...
(like the alpha). Biggest problem: IP headers were overlayed with
structure which included pointers, and which therefore didn't overlay
properly on 64-bit machines. Solution: instead of threading pointers
through IP header overlays, add a "queue element" structure to do
the threading, and point it at the ip headers.
1995-11-21 01:07:34 +00:00
0917ae9d17
define M_IPQ, for IP queue (IP reassembly queue, TCP sequence queue) entries.
1995-11-21 01:00:25 +00:00
c20292b01b
fix casts; should cast pointers to longs, not ints.
1995-11-20 20:43:33 +00:00
b92924680d
Garbage collect some stuff that isn't used. Rename the relocation info
...
structure to be consistent with the other m68k ports. XXX that struct needs
to move to an m68k common file.
1995-11-20 01:15:26 +00:00
22ab83eff0
We don't have, and have never had, a kern/exec_hpux.c
1995-11-20 01:01:05 +00:00
df59198ddc
Put doshutdownhooks() in the right place. Pointed out by cgd.
1995-11-20 00:58:54 +00:00
8272af3168
Re-arrange boot() a bit; call doshutdownhooks(), if we're rebooting, say so,
...
etc. Modeled after the alpha port's boot().
1995-11-19 23:24:15 +00:00
8122bc0e33
Prevent the ITE_ACTIVE bit from being cleared in iteoff() if the ITE_ISCONS
...
bit is set. Works around the fact that the last process to have the
console open exits, the bit is cleared, and "syncing disks...", etc. is
not seen if the system is rebooted with reboot(8). Fixes PR #1455 .
1995-11-19 23:14:22 +00:00
31430a5279
Cosmetically change one #include directive.
1995-11-19 22:32:38 +00:00
905cb9dda1
Re-arrange things such that we can print out disk geometry regardless of
...
COMPAT_NOLABEL.
XXX One day when the world doesn't assume DEV_BSIZE bytes/sector, we'll be
able to actually use the stuff sensed from the drive, rather than a table.
1995-11-19 19:07:18 +00:00
d0e01feb5c
Do an indirect driver a little more like an indirect driver would like to
...
be done. Set up a structure filled with function pointers in the
controller-specific probe routines, and jump through them, instead of
if()'ing our way though each operation.
Be a little more discriptive; print out the controller type found
during the probe in a way that's somewhat meaningful.
1995-11-19 17:57:15 +00:00
97fc3b8321
get size of softc right
1995-11-17 23:33:34 +00:00
86f10d8343
Switch to ncr_si (will just do PIO for now) and cleanup
1995-11-17 23:31:11 +00:00
0ee10ff487
Give translated label a valid magic number
1995-11-17 23:30:19 +00:00
c01eb77976
cosmetic
1995-11-17 23:29:30 +00:00
5d5c8d0d4b
Latest, greatest version of the new NCR driver.
...
DMA works! Interrupts work! Disconnect/reselect works!
To be paranoid, leave that all disabled for now...
1995-11-17 23:27:41 +00:00
6b20139b41
Add copyright
1995-11-17 23:24:56 +00:00
92b8a2d9e5
just cleanup
1995-11-17 23:23:44 +00:00
ce0b404f4e
fixup copyright notice before the release
1995-11-17 06:47:27 +00:00
e9ef628234
don't link against libkern, so that boot blocks will work properly.
...
(pulled down from 1.1 release branch.)
1995-11-16 22:38:16 +00:00
b2f1fb085b
Fix transposed copyin() args, from Niklas Hallqvist <niklas@appli.se>.
1995-11-16 18:42:05 +00:00
bd4a0a45ea
note that COMPAT_OSF1 requires ECOFF, in a comment.
1995-11-15 05:42:17 +00:00
0c031adc76
Not all v2 proms understand the `mac-address' word (from Theo).
1995-11-14 15:04:01 +00:00
83604dcbd6
Add call to doshutdownhooks() before we attempt to reboot.
1995-11-14 04:05:49 +00:00
d125a07adb
My previous changes broke the pcmcia support. For now assume that all non
...
PCI cards look identical to ISA cards.
1995-11-13 20:50:22 +00:00
7a68425190
Don't use the softc at probe time on pci devices because it has not been
...
allocated yet. Thanks Charles...
1995-11-12 20:55:26 +00:00
826b97635f
No longer needed; interrupt vectors now dynamic allocated.
1995-11-12 15:19:49 +00:00
bfc2ca40b8
Function call definition on stack. (calls frame)
1995-11-12 15:07:30 +00:00
763fd0a011
Macros for locore mapping added.
1995-11-12 14:41:41 +00:00
d96cac4b8e
pt_entry_t now struct pte. cleanup.
1995-11-12 14:40:26 +00:00
e6db353726
extern struct scb *scb; added.
1995-11-12 14:38:31 +00:00
7aac03e745
11/750 specific things moved to ka750.h
1995-11-12 14:37:18 +00:00
2a23f39e82
struct ivec_dsp for interrupt vector allocation added.
1995-11-12 14:33:11 +00:00
7edc899fdd
ffs -> ufs
1995-11-11 22:00:15 +00:00
c7d1d39b3e
dk_device => device in controller structure (noted by Jason Thorpe).
1995-11-11 21:12:50 +00:00
fbecb8d22b
Remove the gratuitous code to check for a disc at boot time.
1995-11-11 20:07:57 +00:00
70065d9d16
Fix a comment while I'm here...
1995-11-10 22:05:52 +00:00
01655dec81
Need to define KERNTEXTOFF for kvm_mkdb
1995-11-10 22:04:48 +00:00
3dcdca7c52
Allow unit != 0
1995-11-10 21:59:30 +00:00
e4c4e9cb07
Add support for the 3c59x (pci) cards in the 3c5x9 driver. In addition
...
add the necessary bits for the 3c589 (pcmcia) card without adding any
of the pcmcia framework.
1995-11-10 19:39:21 +00:00
ffa8bfeda1
pcidevs was changed
1995-11-10 19:36:29 +00:00
c3ae59171a
- pcidevs: add 3c590 and adaptec ultra
...
- aic7xxx.c: fix the probe routines to use pcidevs.h
1995-11-10 19:36:08 +00:00
c0aaa86553
Add a config line for 3c590 ethernet cards
1995-11-10 19:34:54 +00:00
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
d16c357ab9
A couple of CPU specific defines moved away.
1995-11-10 19:14:43 +00:00
c9be4b2e09
Removed some warnings.
1995-11-10 19:09:56 +00:00
42edf9d2b4
_idsptch added, _physcopypage removed.
1995-11-10 19:08:59 +00:00
eca544e6fc
sysarch() -> sys_sysarch.
1995-11-10 19:07:16 +00:00
ae0f1d45d8
Allow for dynamic allocation of interrupt vectors.
...
COMPAT_RENO removed.
Handle memory errors.
uap->sigcntxp -> SCARG(uap, sigcntxp)
1995-11-10 19:05:46 +00:00
33bd27fa3c
Major rewriting of pmap_bootstrap; CPU dependent allocations moved
...
to related file.
1995-11-10 18:52:54 +00:00
d3c61be30b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 05:01:05 +00:00
38a7c4b007
Correct the format of some diagnostics.
1995-11-10 04:41:58 +00:00
d8f6a1896b
Convert IRQ, DRQ, and port numbers to int.
1995-11-10 04:30:36 +00:00
051bb183e3
Same as in 1.1 branch.
1995-11-09 08:40:51 +00:00
7a34e263d7
"goto start" after sleeping for locked iso_node in cd9660_lock, like
...
in ufs_lock.
1995-11-08 22:26:24 +00:00
c2cd05605d
UFS => FFS conversion.
1995-11-08 09:09:20 +00:00
3c996d6b06
ufs ==> ffs
1995-11-07 23:01:40 +00:00
dd962ebbf6
Make sys_mount accept "ufs" as an alias for "ffs"
1995-11-07 22:41:02 +00:00
883be4be3a
ufs ==> ffs
1995-11-07 22:27:21 +00:00
54ec9fb697
Correct test for sun4 machines (thanks Chuck).
...
Since uname currently does not allow to discriminate different sparc
models, we use `sysctl.hw.cpumodel' to do this somewhat heuristicly:
if the returned strings starts with "SUN4-" a sun4 architecture is
assumed. This information is used to determine whether or not to strip
the a.out header off the 1st-stage bootblocks.
1995-11-07 11:45:24 +00:00
3b8542c63a
The Falcon needs a delay after writing the dma_data register (Thomas Gerner)
1995-11-06 21:13:38 +00:00
20783f6b85
Bring in several changes from the ccd:
...
* Be a bit better with prototypes
* Use struct dkdevice in vnd_softc.
* Prevent the unit from being unconfigured while open.
* Implement a simple locking mechanism and use it for sanity's
sake.
Still needs more work; needs to support disklabels and the like.
1995-11-06 20:28:09 +00:00
664cb04670
Fix a race condition where if a process is asleep waiting on an
...
exclusive lock of a ccd device while another process is unconfiguring
that same device, the first process would never awaken (unless interrupted).
1995-11-06 19:58:01 +00:00
29fff9256a
Don't forward credentials to bread, it makes nfs panic
...
(Of course, nfs shouldn't rely on the credentials not being referenced)
Don't give directory entry to deget, it could result in a deadlock
Use device blocks, not clusters for logical block numbers
1995-11-05 18:47:48 +00:00
f028be21e6
Update from Ken Nakata.
1995-11-05 04:23:00 +00:00
8b79bcb9e7
Fixes from Ken Nakata. Mainly renaming debug_level to fpu_debug_level.
1995-11-05 00:35:09 +00:00
77daf1e361
Fix cookie handling
1995-11-03 19:36:41 +00:00
e0f9d74ef5
Really don't generate long names when mounted with -s
1995-11-03 17:29:53 +00:00
996526aa02
Make error recovery actually work, i.e. don't hang on SCSI bus resets
...
and re-synchronize before re-scheduling pending operations.
Things seem to be a fair bit stabler now.
1995-11-03 16:47:43 +00:00
bbdb422873
Stop DMA before resetting
1995-11-03 16:34:12 +00:00
3095b6514c
No need anymore.
1995-11-03 14:34:52 +00:00
46e32a9703
No need for this file anymore; it's defines moved to other places.
1995-11-03 14:29:23 +00:00
cc272f90a1
Add in NetBSD id string.
1995-11-03 04:51:51 +00:00
5b38a18f42
include files.fpe instead of just fpu_emulate.c--to get the new fpe code.
1995-11-03 04:50:21 +00:00
526615e592
Add NetBSD id string and update instructions.
1995-11-03 04:48:22 +00:00
fc8793fb3d
Still incomplete, but much more complete FPE from Ken Nakata
...
<kenn@remus.rutgers.edu>. This emulator does not yet emulate
the following functions:
FSINH, FETOXM1, FTANH, FATAN, FASIN, FATANH, FSIN, FTAN,
FETOX, FTWOTOX, FTENTOX, FCOSH, FACOS, FCOS, FSINCOS
It is sufficient, however, to allow programs like df, w, and newfs,
to run to completion with correct results.
Portions of this code were based on the sparc fpe and on initial
work by gwr.
1995-11-03 04:46:55 +00:00
f85819bc44
In ccdstart(), only translate the block number from partition-relative
...
to absolute if part != RAW_PART.
1995-11-03 02:35:54 +00:00
3074f94137
Remove ser1 from init list.
1995-11-01 04:59:31 +00:00
9a1fb2674a
Fixup error/debugging message.
1995-11-01 04:59:03 +00:00
c587e77144
Remove bogus assignment.
1995-11-01 04:58:21 +00:00
819cd49aa7
Remove -fno-builtin
1995-11-01 04:53:34 +00:00
4d13774bbc
Rearrange a bit. bpfilters -> 16 and ae0/ae1 -> ae*.
1995-11-01 04:52:46 +00:00
680ada5add
port-mac/1707: mac68k mouse drag problems with Cmd+arrow keys
...
from Ken Nakata <kenn@remus.rutgers.edu>
1995-11-01 04:40:21 +00:00
8d78a257c0
More rogues.
1995-11-01 01:15:07 +00:00
5d67fa8cb9
Taking out the trash.
1995-10-31 18:03:39 +00:00
8218c4005c
Pull in all but one of Leo's changes from the atari copy.
1995-10-31 15:32:35 +00:00
7ff18ba0a2
The xy goes on VME16, not VME32.
1995-10-30 21:15:40 +00:00
1195faa6f4
Add the function isbad(), needed by xd/xy drivers.
1995-10-30 20:59:27 +00:00
jonathan