13499203a2
Two changes submitted by Sergey Svishchev <svs@ropnet.ru>:
...
- Don't send START UNIT upon open if the drive is playing audio (PR 11768).
- If we receive sense indicating that the media changed, retry (PR 8326).
2001-08-20 11:31:10 +00:00
ab54b70cae
Cosmetic change.
2001-08-20 11:20:51 +00:00
52449ef3bf
Medium Not Present has number of defined ASCQs. Pointed out by Sergey
...
Svishchev <svs@ropnet.ru> in PR 8326.
2001-08-20 07:47:01 +00:00
d861b4992a
Add descriptions for Medium Not Present ASCQs.
2001-08-20 07:41:14 +00:00
75ed9ccf7f
fix scsipi_target_detach with wildcard target.
2001-08-19 14:05:13 +00:00
0cbe02398a
Add support for smaller sector sizes so we can mount ffs filesystems.
2001-08-15 22:21:01 +00:00
f2cacede49
Adn scsipi_target_detach() and scsipi_thread_call_callback() as discussed
...
on tech-kern. scsipi_target_detach() accept wildcard target/lun as requested.
2001-07-18 20:19:24 +00:00
aafd882086
bcmp -> memcmp
2001-07-18 18:27:08 +00:00
38bdc75312
bcopy -> memcpy
2001-07-18 18:25:41 +00:00
03746a443a
bzero -> memset
2001-07-18 18:21:04 +00:00
c399f05222
scsipi_set_xfer_mode(): issue a ADAPTER_REQ_SET_XFER_MODE request to adapter
...
only if we succesfully attached at last one device for this I_T.
2001-07-13 20:00:23 +00:00
cc0b68092e
Correct various misspellings of 'transfer' and inflected forms.
2001-07-08 18:06:42 +00:00
f54fe9f3b1
compile tweak for non-SCSIVERBOSE
2001-06-27 23:14:26 +00:00
6a91469e6d
Some ATAPI CD occasionally reports "ATA illegal indication length" for
...
a request sense command, but the sense is properly transfered anyway.
Ignore the error for this case.
2001-06-27 13:22:36 +00:00
4fadc33006
Better diagnostic when a REQUEST SENSE is terminated with CHECK CONDITION.
2001-06-27 13:21:30 +00:00
90d0e67408
Add a XS_CTL_SILENT_NODEV flag: if the sense info is "not ready, medium
...
not present" don't print any message but still return ENODEV.
Use this in cd driver to allow open of character raw partition even if
the drive is empty (older drives fails at LOAD_UNLOAD time, newer
ones fail at TEST_UNIT_READY time).
2001-06-26 15:32:02 +00:00
f47d097cf5
Make it compile with SCSIPI_DEBUG
2001-06-26 12:46:56 +00:00
15223234d7
Fix some typos in comments.
2001-06-24 10:18:13 +00:00
b7f8c7eb86
delint
2001-06-19 10:43:26 +00:00
49ed2592ce
Add my copyrigth and remove the older ones. None of the original authors of
...
the st driver wrote something in this file.
2001-06-18 09:41:06 +00:00
0a63f01fef
Snapshot of ATAPI tapes support. Known to be able to read/write to tape with:
...
st0 at atapibus0 drive 1: <Seagate STT8000A, , 5.51> type 1 sequential
removable
Major changes may still happen in order to properly support other ATAPI
tape drives.
2001-06-18 09:05:05 +00:00
4bc5a3b295
Add explicit support for IDE and SCSI adaptors which don't support interrupts.
...
On such adaptors, all transfers are done in polling mode.
OK'ed by Manuel on tech-kern.
2001-06-13 18:17:38 +00:00
b9e61207ff
Add nolun/nosync quirk for "IBM CDRM00201 !F"
...
See PR#13031.
2001-06-11 13:58:18 +00:00
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
708bb529d3
uninitialised variable (from Krister Walfridsson):
...
in st_cmprss(), init flags to 0 (never changed, but this should change soon
anyway, for ATAPI tapes support)
2001-05-30 20:28:17 +00:00
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
ffcbc851a0
fix some problems in sddump() with uninitialized variables.
2001-05-29 01:02:39 +00:00
72b4ba8aed
In scsipi_channel_thaw(), if the count drops to 0, call scsipi_run_queue().
2001-05-23 15:50:32 +00:00
fae4d6d720
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 02:16:19 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
3462fe5d99
Remove reference to adapter_q in scsipi structure. Comment about the
...
usage of channel_q.
2001-05-21 15:50:46 +00:00
2ed6d9dbf7
PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size
...
CDB (16 instead of 12).
2001-05-20 21:07:58 +00:00
5c9dc5b0d0
When abusing structs to describe on-wire (or in-hardware) data structures,
...
they need to be packed. (Without this, breaks on at least m68k.)
2001-05-18 21:11:43 +00:00
e4334b830d
Don't capitalize the word sync or async. It's inconsistient with other
...
messages.
2001-05-18 16:25:07 +00:00
8b5bf22895
Workaround for broken drives (explained to me by Chris G. Demetriou):
...
some devices can't handle tag number larger than some values and always
reject commands with QUEUE FULL if the tag number is larger than this.
Under some circonstances the scsipi system may not decrease periph_openings
(as a workaround of other odd behavior) and we may end up requeuing the command
with a hight tag value again, and the driver could loop on this.
Workaround: in case of queue full, decrease periph_openings to
min(periph_active - 1, periph_openings - 1) so that, after some iteration,
periph_openings is less than the max tag value acceptable by the device.
Solves the problem with tagged queuing on ncr53c9x for me.
2001-05-18 12:56:28 +00:00
7ddcb8122d
SDEV_DB -> SCSIPI_DB
2001-05-17 20:02:56 +00:00
b6b83e2ec3
delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size
2001-05-15 14:03:27 +00:00
13a9902fc6
delint: can't have an empty case item at the end of a switch; need a ; at least
2001-05-15 13:53:20 +00:00
bc980d7eba
Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define
...
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
2001-05-14 20:35:27 +00:00
06fc2f85cc
Since __HAVE_OLD_DISKLABEL, DISKMINOR(u, p) isn't continuous over "p"
...
anymore. So we can't pass a range to vdevgone() but have to loop over the
partitions explicitely.
(otherwise the next device unit will be killed)
2001-05-06 18:30:56 +00:00
3446a61cb3
Fix a typo from thorpej_scsipi merge. No-sense information with retval == 0
...
should only print if SCSIPI_DEBUG is defined.
2001-05-06 11:31:08 +00:00
27155d9a6d
Add an ATAPI front-end to the st driver. Completely untested for now,
...
but st at scsi should still work :)
2001-05-04 07:48:56 +00:00
28d47d8db3
Use same type for first field of struct ata_atapi_attach and struct
...
scsipi_channel, so umass has better chances of working on big-endian systems.
2001-05-02 09:47:45 +00:00
85772a1cef
remove some lint
2001-04-30 02:34:58 +00:00
862125c057
Don't forget to set XS_CTL_DATA_OUT (that was removed in previous).
2001-04-28 09:33:25 +00:00
335ac52a5b
Use simple tags for read and write, unless B_ORDERED is set, in
...
which case we use an ordered tag.
2001-04-28 04:11:31 +00:00
74b15b27a2
Don't forget to call psw_done() !
2001-04-27 21:36:58 +00:00
ad