Fix cursor sprite for X11 startup/exit:
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
tech-kern. Reported by Sean Davidson to cause erroneous doubling of
keyboard input on a 5000/50 under load.
Increasing the DELAY() from 2 to 30 doesn't help. Remove it for the
1.3 release. May cause problems with low-speed serial input, but
console keyboards work properly.
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
* Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
size and required users to mount `a' partition, breking raw-device
access like "disklabel rz?".
* Avoid possible divide-by-zero call to howmany() from rzstart(),
on removable media that aren't ready at device-open time.
Verified to work on rrz42.
until a proper fix is available:
Perpetuate the 4.4bsd design even further. Change keyboard-driver
open routines to check for an active raster console. If active, set the
keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
* add includes for sys/dev/scsipi headers.
* cut-and-paste mode_sense and disk-geometry sense code from sd.c,
with name changes sd -> rz.
* Write `rz_command()' to send SCSI sense commands based on
existing rz size-sensing code.
* get geometry info with page 4 and page 5 mode sense.
* use resulting geom info for default label, fake label, and when
using ultrix labels. (ultrix labels have no geometry info).
Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
* Check for a disklabel matching the known values in an install diskimage.
If found, update incore disklabel's RAW_PART with the size reported
by the disk, clobbering the size used by vnd(4).*
* If geometry info is bogus or /missing, supply a fake geometry
(as in sd.c). Saves readdisklabel() and sysinst from divide-by-zero errors.
* lint: RAWPART -> RAW_PART.
(_BYTE_ORDER, _BIG_ENDIAN, _LITTLE_ENDIAN).
Define old names from the ANSI ones if not _POSIX_SOURCE.
* Define _QUAD_HIGHWORD and _QUAD_LOWWORD properly when
_BYTE_ORDER == _BIG_ENDIAN.
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
by renaming "netbsd" to "netbsd.elf", and then creating an a.out image
called "netbsd".
Instead, create _both_ ECOFF and a.out versions of the kernels, named
"netbsd.ecoff" and "netbsd.aout" respectively, and drop the ".elf"
from the ELF kernel.
(And, with any luck, the a.out hack will go away completely Very Soon.)
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
Compute CPU speed(MHz) and loop multiplier for DELAY() based on
counting empty loop between mcclock ticks. New global: cpu_mhz.
Change pmax/pmax/machdep.c to build baseboard model names from cpu_mhz.
Set 'cpuspeed' for more realistic DELAY() on mips3 models.
Mips CPU constants, testing, and calibration from D. Sean Davidson
<davidson@zk3.dec.com> and Simon Burge <simonb@telstra.com.au>.
* Move clockvar.h (header file for generic clock code) to sys/dev/dec.
* Move if_le_dec.c with DEC padded LANCE-dma (pmax/pmax, ioasic, vax 3400)
to sys/dev/dec. Remove from sys/dev/tc.
* Declare attribute le_dec_subr in /sys/dev/dec/files.dec,
use if_le_dec.c when it's defined.
* Move IOCTL asic declaration from pmax and Alpha MD machine
files to sys/dev/tc/files.tc.
* move TurboChannel and ioasic if_le attachments from pmax and Alpha machine
config files to /sys/dev/tc/files.tc. Add le_dec_subr attribute.
* Add if_le_dec attribute to if_le_ibus (pmax ds3100 pmax) LANCE attachment.
Add DDB interface to /sys/arch/mips/mips..
Rework heuristic stack traceback to work with DDB.
Add hooks to print exception log from DDB.
Add hooks from pmax console drivers: call Debugger()
after break from serial console, or 'DO' key from LK-xxx.
newly-exec()ed user-land process for the new dl*-capable crt0:
a0 stack pointer (points to onstack argc)
a1 rtld cleanup (filled in by dynamic loader)
a2 rtld object (filled in by dynamic loader)
a3 ps_strings
From Jason Thorpe (thorpej@nas.nasa.gov).
* cpuregs.h:
rename remaining VMMACH_xxx TLB macros to MIPS_TLB_xxx.
Add compile-time MIPS3-only, compile-time MIPS1-only, and
runtime (both) definitions for number of TLB ASIDs (tlb pids)
and shift count to extract a TLB pid.
* locore.h:
Delete unused vector slot for indexed TLB writes.
mips1 and mips3 TLBs are different enough that we have
to break them out at the caller anyway.
* Add compile-time MIPS3-only andcompile-time MIPS1-only
macros to call locore functions directly by name.
Use the existing method table only if
* mips/mips_machdep.c, mips/trap.c, mips/pmap.c, pmax/machdep.c:
Use MIPS3_ or MIPS1_ specific names for TLB pids in
mips3 and mips1 specific code paths (e.g., creating the kernel stack
for process 0).
Add `options MIPS3' to pmax/conf/GENERIC.
* cpuregs.h:
Delete unused VMMACH_ names (e.g., duplicates of PTE bits in pte.h).
Change remaining VMMACH_xxx names to MIPS1_xxx or MIPS3_xx.
Fold remaining compile-time definitions into a single #ifdef MIPS3.
* Use MIPS1_ names in locore_r2000.S, mips3_ names in locore_r4000.S
* Garbage-collect MachHitFlushDCache()
* psl.h:
use MIPS1_, MIPS3_ symbolic names for Cause register bits.
change _R3K to MIPS1_, _R4K to MIPS3. Conditionalize for mips1 only,
mips3 only, or when both are defined, use runtime CPUISMIPS3 test.
similar design and code by Jason Thorpe and Jonathan Stone.
NOTE: the kernel-stack-switching code and cacheflush() calls in
locore.S still use #ifdef MIPS3 and need more work.
mips/include/cpu.h:
Add CPUISMIPS3 for run-time tests of what CPU architecture level
we're running on.
mips/include/locore.h:
Add declarations of locore cache-size variables for ref/def toolchain.
mips/include/mips1_pte.h:
mips1 TLB bit definitions.
mips/include/mips3_pte.h:
mips3 TLB bit definitions.
mips/include/pte.h:
define accesor macros for TLB bits (e.g., mips_pg_m_bit(),
that expand to CPU constants if only one CPU arch is configured,
or to inline functions if both MIPS1 and MIPS3 are configured.
mips/mips/locore_r2000.S:
Use MIPS1_PG_xxx constants inside mips1-specific code.
mips/mips/locore_r4000.S:
Use MIPS3_PG_xxx constants inside mips3-specific code.
mips/mips/locore.S:
Use MIPS1_PG_xxx constants inside mips3-specific code.
Use MIPS1_PG_xxx constants inside mips1-specific code.
(Needs more work!)
mips/mips/{pmap.c,vm_machdep.c,trap.c}, pmax/pmax/machdep.c:
Use MIPS3_PG_xxx constants inside mips3-specific functions,
and MIPS1_PG_XXX inside mips1-specific code.
Otherwise, use mips_pg_XXX_bit() macros where they apply,
and use "if (CPUISMIPS3) { ... } else {... }" where they don't.
mips/mips/mips_machdep.c:
Import Michael Hitch's fixes from the pmax locore-init code
into mips_vector_init().
pmax/pmax/machdep.c:
Use generic mips_vector_init() locore vector-init function.
Move mips-specific pmap definitions (PMAP_PREFER for mips3, declaratin
of pmap_bootstrap() for the system-specific machdep.c) from
arch/pmax/include/pmap.h to arch/mips/include/pmap.h.
* Move declaration of locore communcation variables (CPU family,
cache sizes, etc) to mips/include/locore.h. Delete from
pmax/include/cpu.h and older versions from pica/include/cpu.h.
* Move definitions of CLKF_BASEPRI, CLKF_USERMODE to mips/include/cpu.
* Delete duplicate definitions in pica/include/cpu.h, pmax/include/cpu.h.
Change pmax/include/psl.h to just do #include <mips/psl.h>.
pmax/include/psl.h would go away completely if it wasn't stil required
by compat/common/kern_exit_43.c.
recovering from a possible race condition in sii_intr, read the active
target from the destat register, and set the softc state pointer
`state' appropriately. (This warning is in a block that prints a
warning message, and the warning message has _never_ been seen. The
bug is probably innocuous.)
Also addresses the `more thought needed' in the log message for rev. 1.12.
respectively), so console setup code can test forconfiguration of the
correct front-end (via NDC_DC and NDC_IOASIC, respectively).
Delete 'needs-flags' from dc.c. GC obsolete uses of NDC, "dc.h".
> revision 1.33
> date: 1997/05/15 02:15:55; author: thorpej; state: Exp; lines: +8 -4
> - In sccmatch(), check any user-specified offset, allowing scc unit numbers
> to be nailed down. From Ken Hornstein <kenh@cmf.nrl.navy.mil>, PR #3626,
> slightly modified to allow wildcarded offsets.
> - Blow away the cf->cf_unit check in sccmatch(); it's bogus.
Also gc usused references to NSCC and #include "scc.h"
(The operator-precdence changes in 1.11 were pulled up in rev 1.14).
* If the chip asserts a SCSI-bus error (SII_BER) in sii_intr,
reset the SII_BER bit instead of ignoring it.
XXX SII_BER May need checking and resetting elsewhere.
Fixes broken blitting from rcons.
* Put back old 4.4bsd range test on cursor movement. 1.2 code is broken.
* Disable screensaver, it reportedly never comes back on properly.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
needed. When sfbattach() initializes the fbinfo data, it was corrupting
data past the struct device data actually allocated. This does not appear
to have caused a problem in the past, but causes a problem with the new
setroot() changes by Jason.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
* kill scc_tty[] and needs-count.
* Add usable-when-cold version of sccparam().
* Add pre-autconf() console initialization entrypoint.
* remove lint for gcc -Wall
* wbflush() -> tc_mb()
all but the last of which have been fed through cgd and committed to the
Alpha scc driver.
mips_r2000_, mips_R2000_ -> mips1_
mips_r4000_, mips_R4000_ -> mips3_
(which are also, for mnemonic reasons, consistent with gcc flag usage,
rather than using mipsI_ and mipsIII_).
Where CACHED_TO_HYS() is still needed for kernel-virtual-to-physical
or physical-to-uncached mapping (fb drivers), replace with
`#include <mips/cpuregs.h>'.
* dcparam() with normal tty t_param interface, which calls
* cold_dcparam() called with explicit dc7085 register address
and flags, which does the work and is also callable when cold,
to set up console (or kgdb) line parameters.
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
NetBSD-current changes:
* change include paths to be relative to the kernel-source tree
(e.g., `/sys') instead of arch/pmax/conf.
* add explicit options for exec packages (EXEC_ELF32, EXEC_ECOFF
for COMPAT_ULTRIX)
* comment out references to still-unsuppoted MI scsi.
DEC dc503 cursor chip) into Decstation 2100,3100 cfattach front-end
and ``machine-independent'' back-end.
pm_ds.c: pmin/pmax cfattach front-end
pm.c: bt478, 503 back-end
pmvar.h: declarations of back-end normal and console attach
entry points.
fair