6fcbc6b230
regen: Cabletron 22xx (AMD LANCE/PCnet Ethernet) addition
2002-09-03 17:42:54 +00:00
5c2a73c8d7
According to kern/17695, the Cabletron 22xx works with the NetBSD
...
Lance Ethernet driver attached to isapnp. Add it to the list.
2002-09-03 17:42:26 +00:00
7bce3285d4
put back RCS Id
2002-06-22 22:14:09 +00:00
705e75558c
regen
2002-05-31 15:38:55 +00:00
03dc556078
add usr v.everything.
2002-05-31 15:38:43 +00:00
1c66d18529
Make it possible to override the way register access is done.
...
This is needed for some really screwball attachments of the CS8900.
2002-05-21 02:47:04 +00:00
7f7ab48604
Rename the audio "bus" attribute audiobus to avoid confusion with audio
...
device.
2002-04-22 09:41:19 +00:00
ed5298eb2f
Make the LEDs work.
...
Green LED = we have a TEI assigned, yellow LED slow blinking = one B-channel
in use, yellow LED fast blinking = both B-channels in use.
2002-04-15 08:11:00 +00:00
bc96c942e9
This card issues a constant stream of interrupts (from an internal timer).
...
Make it do this only while /dev/isdn is open.
2002-04-15 06:59:51 +00:00
e4998611e9
Fix copyright notice.
2002-04-14 12:24:26 +00:00
0cdadad2cd
Defer initialization of the ISAC chip until we enable interrupts - it gets
...
into a strange failure mode if we do it with disabled interrupt. When
(re-)enabling interrupts reset transmitter and receiver and clear any
pending state.
2002-04-13 10:28:36 +00:00
71d5289a50
regen
2002-04-12 13:12:57 +00:00
9a5cce0e79
add some more devices; sorry I don't remember where they came from.
2002-04-12 13:12:40 +00:00
f12d3f51e7
Remove some redundant tries to disable interupts. We already avoided enabling
...
them.
Fix a stupid typo when enabling/disabling interrupts: we clear pending
interrupts when enabling, not disbling isac interrupts.
2002-04-10 23:51:06 +00:00
58502ab93e
Combine sc_enabled and sc_dying into one field sc_intr_valid, they are used
...
for the same purpose (ignoring invalid interrupts).
For cards that are not able to stop all interrupts (or we don't know a way
to do that in software, at least) run the clearirq callback even when
ignoring an interrupt because we are not enabled. Otherwise the card would
stop interrupting.
Reserve a driver specific callout handle and an int value in the generic
isic_softc to allow card drivers to implement fancy blinkenlights.
2002-04-08 12:20:49 +00:00
e5c92d53f8
Be a nice citizen, enable interrupts only when we are ready to talk
...
to the ISDN (i.e. when userland has /dev/isdn open).
2002-03-30 19:13:44 +00:00
ed4ba39c75
Add a command to layer 1 drivers to update LED state for controllers that
...
have status LEDs.
2002-03-30 17:54:17 +00:00
0bc69b6498
Now that we have all the pieces of the puzzle available start to unriddle
...
and move them in their proper places.
Move the BRI registry from layer 2 (duh!) to layer 4, so active cards
(which don't have layer 3 or layer 2 in their driver). Remove all remaining
hard coded controller and driver types. Remove any arbitrary hard coded
limits, at least those that show up in the internal API.
This fixes PR 15950.
2002-03-24 20:35:43 +00:00
d5f39a2d9c
Add explicit support of OPL3-SA2 (YMF711).
...
Not well tested....
2002-03-10 13:57:10 +00:00
8af2b425a2
Add a missing call to isapnp_config().
...
Do not hardcode IST_EDGE, use the type from the attach args.
Noticed by Christos Zoulas.
2002-02-22 21:26:47 +00:00
df34bbcc7a
Regen
2002-02-22 17:13:46 +00:00
5cdee96e49
PR/15701: Mike Wlodarczyk: ISAPNP data for another SupraExpress 56I SP V.90
2002-02-22 17:13:26 +00:00
f32b3f4f89
Reduce the massive code duplication regarding joy(4). Split it into
...
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 18:37:38 +00:00
f8974bfebe
Add support for ITK IX1 PnP cards.
...
Thanks to Nick Hudson for testing.
2002-01-21 12:31:42 +00:00
3835413bc1
Overhaul of the ISA autoconfiguration code to support direct
...
configuration of devices logically attached to the ISA bus:
* Change the isa_attach_args to have arrays of io, mem, irq, drq
resources.
* Add a "pnpnames" and a linked list of "pnpcompatnames" to the
isa_attach_args. If either of these members are non-NULL,
direct configuration of the bus is being performed. Add an
ISA_DIRECT_CONFIG() macro to test for this.
* Drivers are not allowed to modify the isa_attach_args unless
direct configuration is not being performed and the probe fucntion
is returning success.
* Adapt device drivers -- currently, all driver probe routines return
"no match" if ISA_DIRECT_CONFIG() evaluates to true.
2002-01-07 21:46:56 +00:00
70e238a1bc
PR/15049: Katsuomi Hamajima: fix memset re-definition.
2001-12-25 14:03:15 +00:00
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
b2dc60987f
add isapnp frontend for cs driver.
2001-11-27 12:23:31 +00:00
e9dd0249c8
regen for IBM EtherJet ISA.
2001-11-27 12:21:49 +00:00
dcb7807cbe
add IBM EtherJet ISA.
2001-11-27 12:20:39 +00:00
bdb84bd0cd
Regen
2001-11-16 18:34:08 +00:00
d10a585999
add another USR modem.
2001-11-16 18:33:35 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
9d2580ff16
add RCSID
2001-11-13 07:56:39 +00:00
4be2902b43
regen for RCSID
2001-11-13 07:54:18 +00:00
6f230ccce0
add RCSID to generated .c file
2001-11-13 07:52:41 +00:00
1339e88a86
Add a new optional method, dev_ioctl, to the audio hardware driver interface.
...
It is called when an unrecognized ioctl() is performed on a device,
thus allowing ioctl()s that frob the hardware driver (like loading
microcode).
2001-10-03 00:04:47 +00:00
0cf4cbfa39
Use ISACF_*_DEFAULT rather than *UNK.
2001-09-26 01:17:16 +00:00
f532a911f0
Chipset is CORKSCREW for the 3c515.
2001-07-27 02:13:26 +00:00
f9616582f4
Regen -- added 3c515 for the ep driver.
2001-07-27 02:12:57 +00:00
d3ee9bd16e
Add the 3c515 for the "ep" driver.
2001-07-27 02:12:19 +00:00
3d98de578f
Remove unnecessary include files. From Onno van der Linden.
2001-07-08 17:55:50 +00:00
b5e1e7d8ab
add #include <net/if_ieee80211.h> to make it compilable.
2001-06-21 14:02:56 +00:00
d62038a18e
Add Aztech sound card found in HP Kayaks.
2001-04-15 03:31:37 +00:00
372e5956ef
Only install headers which are actually used by our userland. This
...
saves about 2.2MB under /usr/include/dev/. Discussed on tech-kern@
recently.
I HOPE to get the list right. The headers I left in are ones
used for MI tools and those whose usage I discovered by grep over tree sources.
Feel free to put needed includes back in if you encounter anything which
should not be removed from lists.
2001-04-11 07:42:31 +00:00
5171d409a5
First step to cleanup the hardware driver <-> upper layers interface.
...
This now provides slightly more functionality than the FreeBSD layer1-newbus
interface. It was meant to be a simple change to one header and a few
c files, but the change rippled all through various stuff.
To prevent a change to the kernel<->userland interface right now the kernel
is now lying about card types to userland (but who cares). This will be fixed
when the userland interface changes, after layer 3 <-> layer 4 has been
fixed.
Functional changes:
Provide a clean interface for hardware drivers to attach to the upper
layers. This will need another small change in the B-channel handling
when a similar change to the layer 3 <-> layer 4 interface happens.
Avoid passing indices into global arrays of pointers around, instead pass
the pointers itself. Don't code hardware driver types by predefined magic
numbers (think LKM). Prepare for detachable drivers (think pcmcia).
While there remove some sets of function pointers always pointing to the
same function (meant to be the configurable set of D channel protocol
handlers). It is unlikely another supported D-channel protocol will fit into
that (maximal layer interface) abstraction. When we get support for another
protocol, we will need to come up with a workable interface. Besides, the
old implementation was, uhm, strange.
2001-03-24 12:40:29 +00:00
76ea3fcb82
regen
2001-02-24 20:13:53 +00:00
e6583ce243
add ESS wd controller.
2001-02-24 20:13:33 +00:00
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
f0d6660cf4
Filename cleanup: remove i4b_ prefixes outside sys/netisdn, last round.
...
Renamed in sys/dev/ic:
i4b_hscx.c -> hscx.c
i4b_hscx.h -> hscx.h
i4b_ipac.h -> ipac.h
i4b_isac.c -> isac.c
i4b_isac.h -> isac.h
i4b_isic.c -> isic.c
i4b_isicbchan.c -> isic_bchan.c
i4b_isicl1.c -> isic_l1.c
i4b_isicl1.h -> isic_l1.h
i4b_isicl1fsm.c -> isic_l1fsm.c
2001-02-20 22:24:31 +00:00
40db0102c3
Filename cleanup police (per discussion with Soren S. Jorvang):
...
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c
2001-02-18 09:24:49 +00:00
043e519d55
Adjust the way that media is initialized on DP8390-compatible
...
chips. The dp8390_softc now has media_init and media_fini
function pointers that do the work.
2001-02-12 18:49:03 +00:00
cf9b8e8210
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem device ID.
2001-01-26 11:04:20 +00:00
2b15bcc35b
Contribution by Ryoji Kato: I-O DATA IFML-560 56K modem support.
2001-01-26 11:02:18 +00:00
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
aaad4d0284
Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq
...
being set in pnp mode.
2000-12-19 01:09:15 +00:00
324ff9ac52
Regen
2000-12-19 01:08:13 +00:00
a006fdf328
Correct ALS100+ entry.
2000-12-19 01:07:52 +00:00
e2372c3a0b
Regen
2000-12-18 17:00:44 +00:00
ca4a96b3da
Add Avance Logic ALS100+
2000-12-18 16:55:46 +00:00
19c3f4691f
ISAPnP front-end for the Aironet 802.11 cards. Note this is currently
...
untested.
2000-12-17 20:34:40 +00:00
5b67bb41a2
Regen; added Aironet 802.11.
2000-12-17 20:17:20 +00:00
8c28f8f467
Add Aironet ISAPnP device ID.
2000-12-17 20:16:03 +00:00
cfe0892ed3
NBPG -> PAGE_SIZE
2000-11-14 18:42:55 +00:00
a020e8fbb5
regen
2000-08-28 17:44:33 +00:00
8b242e878a
add entry for SupraExpress 56i Sp V.90, as sent in kern/10902
2000-08-28 17:43:59 +00:00
261538ecac
remove include of <vm/vm.h>
2000-06-28 16:39:25 +00:00
a4f554c4ac
Add CS4235 MPU id.
2000-06-06 18:08:51 +00:00
63649c5744
Make the frontend print a newline.
2000-06-06 16:27:49 +00:00
d4bcd03b81
PR/10154: Antti Kantee: ignore 0 length resource(s)
2000-05-23 17:50:53 +00:00
df1f794536
Reflect version 1.13 of i82365_isa.c. Untested.
2000-02-23 17:22:11 +00:00
8613a0edaa
Regen.
2000-02-08 06:36:46 +00:00
a87f862d24
Add Allied Telesyn AT-1500, lance ethernet.
2000-02-08 06:36:29 +00:00
52a2804a5c
Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns
...
the maximum transfer size for the specified DMA channel. Make all clients
of ISA DMA use this call to determine their maximum transfer size.
2000-02-07 22:07:27 +00:00
d8e72e215d
implement probing for available irqs on non-cirrus pcmcia controllers
...
including cardbus controllers running in pcic mode
2000-02-01 22:39:51 +00:00
387644d34d
regen
1999-12-15 05:49:44 +00:00
5e4e92603b
add another modem; from Dan J Fraser
1999-12-15 05:49:33 +00:00
df56622ada
regen
1999-11-27 09:02:22 +00:00
3de779c46a
Add support for CS4235 codec as found on Intel KU440EX motherboard.
1999-11-27 09:02:13 +00:00
559f1ca662
re-generating isapnpdevs.c isapnpdevs.h
1999-11-17 02:03:10 +00:00
1e396f9b0b
Support for Adaptec AVA-1502P
...
kern/8804 patch by NAKAGAWA, Yoshihisa
1999-11-16 05:10:54 +00:00
040891d3e1
regen
1999-10-27 15:12:28 +00:00
c48725b28e
PR/8692: maximum entropy: Recognize Creative SB Awe 64 joystick.
1999-10-27 15:11:56 +00:00
80b776d037
Use NMPU instead of NMIDI so that it can compile without mpu attachment.
...
Requested by Izumi Tsutsui.
1999-10-18 05:11:39 +00:00
1fa3147269
Add support for "opl at ym" and "mpu at ym" attachment.
1999-10-05 03:47:20 +00:00
fcc61fbac4
PR/8443: Yamano-uchi, Hidetoshi: Missing register in IODESC.
1999-09-23 16:09:58 +00:00
12bad24883
Add opl at wss for isapnp devices w/o MAD chip.
1999-09-06 18:31:45 +00:00
5cfe8783f9
Regen.
1999-08-24 12:47:20 +00:00
416c42cc34
Add AdLib MSC 32 Wave PnP board (wss audio device).
1999-08-24 12:46:55 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
a6a09bcdd6
Add support for ES18[67][89]. From PR #7427 by AW9K-NNK@asahi-net.or.jp,
...
Nonaka Kimihiro.
1999-06-18 20:25:23 +00:00
8d38841260
Make it possible for this driver tp work again.
...
From Thomas Klausner - wiz@danbala.tuwien.ac.at
1999-05-18 16:41:07 +00:00
8fb6c6124b
From Onno van der Linden:
...
Reorganise the driver some what.
Rename tr_reset() to the more appropriate tr_stop().
Create a common tropic reset routine and use it in the frontends.
Move the code in tr_config() which is only used in the card attachment
routines into a new tr_attach() function.
Take adapter off the ring through tr_shutdown() in a shutdown hook.
This simplifies the bus-specific frontend.
1999-04-29 15:47:02 +00:00
fe72ae262f
Rebuilt from 'isapnpdevs'.
1999-04-18 13:21:01 +00:00
690bd69d3e
Add Diamond Supra 336i to device list.
1999-04-18 00:35:30 +00:00
4622761326
Enable workaround for isapnp assigning already used interrupts to pnp
...
cards by masking them out with a "options ISAPNP_ALLOC_INTR_MASK=..."
in kernel config.
1999-04-12 19:31:27 +00:00
29ddb0a0af
regen
1999-04-07 08:21:42 +00:00
7fdc304a14
Add another USR modem
1999-04-07 08:21:25 +00:00
cadb84965d
Use complete sentences in the generated comments.
1999-04-06 23:03:44 +00:00
17c3351354
Regen.
1999-04-06 23:02:31 +00:00
31f94ae97e
Add Leopard 56k PnP, from PR 7330.
1999-04-06 23:02:09 +00:00
c45bee7307
Regen.
1999-03-29 21:36:00 +00:00
05eae31620
Now that he ESS 1868 and 1869 are working, enable them here.
1999-03-29 21:35:19 +00:00
a4e508928f
Oops. RcsID police.
1999-03-22 23:01:36 +00:00
e09c06e04d
Regen.
1999-03-22 22:36:49 +00:00
579b0fce1b
Recognise IBM and 3COM Token-Ring PnP cards and associate them with the tr
...
driver.
1999-03-22 22:36:10 +00:00
ce0465b40f
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-22 22:33:35 +00:00
2c16793ee5
Chipset driver for TROPIC based Token-Ring cards.
...
Frontends for IBM and 3COM ISA cards.
By Onno van der Linden <onno@simplex.nl>.
1999-03-22 22:21:26 +00:00
41d5307e95
One minor change to previous.
1999-03-22 14:32:59 +00:00
f887d74c45
Nuke sc_iooffs from orbit. This is exactly what bus_space_subregion() is for.
1999-03-22 14:29:14 +00:00
6ada3afd8b
Reject variant numbers which are too large (so that a new version of isapnpdevs
...
with an old driver will not lose mysteriously).
1999-03-22 10:00:09 +00:00
2cccf3bd4a
Update callers of isapnp_devmatch().
1999-03-22 09:44:12 +00:00
cbd5623c72
Add support for switching Aztech chips into WSS mode.
1999-03-22 09:43:12 +00:00
86d586012a
Regen.
1999-03-22 09:41:58 +00:00
8e0df99c1e
Add variants numbers, and Aztech AZT2320 bindings.
1999-03-22 09:41:10 +00:00
77274e73c6
Add a `variant number' to the tables, so we can handle slight variations in
...
the chipset without doing something substantially more gross.
1999-03-22 09:38:57 +00:00
878708a06b
Adjust for MPU attachment change.
1999-03-22 07:41:36 +00:00
fd400e0ddc
Add a kluge to ignore I/O and memory ranges with a size of zero, so we don't
...
blow up in bus_space_{map,unmap}(). At least one card uses this to `disable'
a logical device.
(XXX There's probably a better way to do this.)
1999-03-22 07:40:57 +00:00
ccbad3061c
Add a mpu_isapnp attachment.
1999-03-22 07:39:33 +00:00
1f2cf84892
pull isapnp_machdep.h in from machine/
1999-03-19 03:24:19 +00:00
270a41c358
We only have one IRQ.
1999-03-19 01:21:24 +00:00
43b95688fe
regen
1999-03-18 17:07:51 +00:00
f5489c46e2
aic at isapnp is reported to work with AVA-1505A boards too
...
(by "Elephant's Root" <root@elephant.nervana.montana.edu>,
PR kern/7179),
add the device id and the compat id used by this board
1999-03-18 17:07:09 +00:00
4bd7ef0241
Adjust for structure name changes.
1999-03-17 22:19:35 +00:00
ce18d4bd84
corrected the "generated from" lines by running make -f Makefile.isapnpdevs
...
AFTER committing isapnpdevs.
1999-03-17 21:11:57 +00:00
16ef4e3349
Add entries for USR Sportster 14.4K and 33.6K
1999-03-16 22:58:17 +00:00
729bfc4dd7
undo commit made in error
1999-02-28 19:03:11 +00:00
c1ab1c57fb
don't collect or estimate on network devices by default
1999-02-28 19:01:30 +00:00
46e61f2db1
regen to correct "generated from" as pointed out by Matthias Drochner, thx!
1999-02-24 18:26:37 +00:00
5ff2e5a369
Add entry for Terratec AudioSystem EWS64 CoDec.
1999-02-24 15:37:34 +00:00
281bba9355
Update for minor changes in the ad1848 back end.
1999-02-23 21:16:27 +00:00
fad6371a16
Update for recent changes in wssvar.h.
1999-02-23 09:14:05 +00:00
71eb5693e6
Use DMAMODE_DEMAND.
1999-02-22 03:24:33 +00:00
4822d3d0b0
Move IRQ setup into frontend. Need to move DRQ handling as well.
1999-02-19 16:10:44 +00:00
74028ea9fd
Regen.
1999-02-18 22:32:27 +00:00
b71baddba7
Add ID for MagicRam SwapBox PCMCIA controller card.
1999-02-18 22:31:32 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
e8690f9bd1
Fix ESS/SB confusion for 1868 and 1869 chips: because isapnpdevs is parsed by an awk script, you *must* comment out each line separately, which is why ess was still trying to attach chips it couldn't cope with. Note that this leaves isapnp ess with no matches -- shouldn't the 188X be in here? Also, add another isapnp PCIC.
1999-02-08 22:10:09 +00:00
eade8dcad9
Don't use ess driver for ESS186[89], it doesn't work.
1999-02-05 01:15:01 +00:00
ddb8209b40
XXX Add a disgusting hack to make the CS sound chips work in PnP mode.
...
XXX Read about it in isapnp.c.
1999-01-10 10:23:24 +00:00
363ea8b7ff
Regen.
1999-01-04 22:41:58 +00:00
67e990eed1
Add USR 56K Faxmodem, from jbernard@ox.mines.edu in PR 6729.
1999-01-04 22:39:42 +00:00
ce816d0c65
Regen
1998-12-21 07:57:17 +00:00
e0bd7401e6
PR/6619: Rick Byers: Add Motorola ModemSurfr
1998-12-21 07:57:00 +00:00
981a2987e6
Regen
1998-12-20 18:54:52 +00:00
b8041892e9
Add another modem.
1998-12-20 18:54:37 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
a5d7ea15aa
Regen.
1998-12-02 09:43:15 +00:00
8692433023
add the compat id for the aha-1542cp
1998-12-02 09:42:57 +00:00
246a68a003
Add support for `AdLib NSC 16 PNP' as wss, joy.
...
Record source selection needs work.
1998-11-26 21:45:13 +00:00
9726cfd1fb
Make the copyright header conform to the NetBSD template.
1998-11-25 22:17:06 +00:00
3ebca7fd4e
regen
1998-11-23 20:49:20 +00:00
bb7d20f01a
add adaptec aha attachment
1998-11-23 20:48:34 +00:00
f2bd402051
add adaptec aha attachment.
1998-11-23 20:47:51 +00:00
c312dc3f08
Avoid looping forever with cards that can only use one I/O address,
...
and specify a 0 alignment.
1998-11-21 23:38:11 +00:00
3e38051bc5
in wdc_softc: access the per-channel data via a pointer array instead of
...
an array of fixed-sized channel_softc elements. This way IDE controllers
which more than 1 channel (pciide) can extend the channel data easily
for private needs.
To avoid the double dereference at runtime, change the argument of
wdcstart() to the channel data pointer instead of the array index.
1998-11-21 15:41:41 +00:00
a16b0cc7db
regen
1998-11-12 14:09:20 +00:00
0c0b302fba
-add an NE2000 clone, info from PR kern/6430
...
-add comment for PCNET/isapnp (ID is vendor specific)
1998-11-12 14:06:34 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
f568c6347c
Fix last commit -- NISADMA is either 0 or 1.
1998-10-10 13:43:10 +00:00
5599443810
If ISA DMA is not present in the kernel (i.e. no ISA DMA-using devices
...
configured in), don't call ISA DMA functions to check for DRQs being
free. Just return EINVAL in this case. Fixes PR #6187 , from Herb Peyerl.
1998-10-08 19:59:20 +00:00
b2b0497860
Regen
1998-10-04 18:31:14 +00:00
ea1107f4c7
Add another soundblaster compatible card (Steve Allen)
1998-10-04 18:30:50 +00:00
379c9be4a8
More patches for ARC from Noriyuki Soda:
...
* commit isapnpvar.h changes required for ARC to support plain isa.
* fixup mistake over mips/include/cpuregs.h.
* mips/mips_machdep.c:
set L2 cache-size for arc, cleanup use of L2cache present
vs L2 cache-size variables. check for no L2 cache on kernels
configured to require one. misc cleanups.
* mips/mpis/trap.c: more locore stack-traceback label cleanup.
XXX Locore callbacks for mips3, mips4, r4600 cacheflush need more work.
1998-10-01 00:42:37 +00:00
3ad5f134c3
Regen.
1998-09-21 20:28:48 +00:00
e017934564
Add CS4235 joystick.
1998-09-21 20:25:52 +00:00
b03b63aef4
Make these files compile again; no longer necessary to pass
...
iobase to comprobe1.
1998-09-18 14:38:48 +00:00
cd65bcf1db
Regen.
1998-09-12 21:49:51 +00:00
0b009ef925
Add support for the OPTi Audio 16 IDE controller.
1998-09-12 21:48:57 +00:00
3e6930640f
PnP IDE controllers can pass us the regions in any order, so make sure
...
that sc_ad.ioh is the 8-byte region as opposed to blindly passing it
the first region.
With this change, and a device def which will follow, the IDE controller
on my OPTi Audio 16 card works!
1998-09-12 21:40:22 +00:00
bd52ba3c5a
Assign copyright to TNF.
1998-09-05 14:42:05 +00:00
236611ac0b
Regen.
1998-09-05 14:18:04 +00:00
c7a4282124
Assign copyright to TNF.
1998-09-05 14:12:36 +00:00
f7151935ef
Adjust for ad1848.c split.
1998-08-25 22:35:25 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
ef4e6a52aa
Regen.
1998-08-15 19:27:16 +00:00
20e821491f
Add the Zoom ComStar 33.6 modem, from Dave Huang <khym@bga.com>, PR #5976 .
1998-08-15 19:26:18 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
c587bae132
Nit: space -> tab conversion. No functional change.
1998-08-12 19:16:24 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
53878c1925
Change one word to be consistent w/ a previous message.
1998-07-31 05:37:02 +00:00
99d64ae1ca
Oops, unused variable.
1998-07-31 05:29:48 +00:00
4ea9132164
Rearrange isapnp_callback() slightly.
1998-07-31 05:28:24 +00:00
c489673819
Ensure we're probed only once per ISA bus.
1998-07-31 05:26:15 +00:00
6ec566abd2
Add BeBox support.
1998-07-31 04:56:55 +00:00
c46ad7a0cc
Add NetBSD/arm32 support.
1998-07-31 04:50:54 +00:00
171cebde9c
Actually add support for the Atari.
1998-07-31 04:45:01 +00:00
54de49fcb9
Add support for NetBSD/alpha.
1998-07-31 04:35:22 +00:00
f40a42d5c4
Use config_defer() to scan for ISA PnP cards.
1998-07-31 04:00:35 +00:00
c1303944f7
Add a hook that resets the bios configuration from the pnp devices
...
thus making them invisible to isa probes [from OpenBSD]
1998-07-30 18:02:50 +00:00
dd49f248a4
Protect against multiple inclusions.
1998-07-30 18:01:44 +00:00
jdolecek