1d83a2dea6
No need to call pci_set_powerstate from our powerhook, the bus handles this
...
for us now.
2006-09-25 23:11:07 +00:00
8e37d48dc1
Create a PCI bus powerhook to handle setting PCI D# power state transitions
...
on suspend/standby/resume.
2006-09-25 23:09:42 +00:00
ce9801710e
Only display "interrupt while not running ignored" if DIAGNOSTIC is set, as
...
whenever this happens, so many messages are spewed to the screen from the
kernel that the system is effectively useless. Hardly ignored :-)
2006-09-25 22:15:15 +00:00
fbd43a6ddc
Add powerhook for RT2560-based cardbus wireless adapters.
2006-09-25 22:14:01 +00:00
f6eef99476
Don't accept a compressed image that has 0 for the block size...
...
Fixes PR#34608.
2006-09-25 13:47:26 +00:00
223213b93f
Improve some debug texts.
2006-09-24 19:07:26 +00:00
d9a3e24d2f
Regen with new IDs for devices in the last-generation Apple PowerBook G4.
2006-09-24 18:36:40 +00:00
f1e45a271e
Add IDs for the devices in the last-generation PowerBook G4.
2006-09-24 18:35:34 +00:00
d04123ca73
Run the "power button event" hooks when the special button OFF is pressed.
...
Change the keycodes in the keymaps that are currently using the OFF button
to -1 so that they will still operate the same way (i.e. do nothing).
No objection on port-hpcsh & port-hpcmips.
2006-09-24 18:34:41 +00:00
8b0b9e2db5
Regen
2006-09-24 17:18:49 +00:00
385afe8d48
Fix whitespace inconsistencies; no functional change
2006-09-24 17:18:02 +00:00
da685f2130
From Claus Andersen:
...
- change uftdi driver to use usb_lookup
- are more devices (from FreeBSD/OpenBSD)
2006-09-24 17:17:17 +00:00
5396cf7fbb
PR# 23620: channels are swapped
2006-09-24 14:26:50 +00:00
e396b69764
PR# 29372: notebook with Maestro 2E sound chip panics (w/ fix)
2006-09-24 13:24:32 +00:00
4eabff54a3
utilise auconv_set_converter() to handle the filter setup, so that its
...
done properly.
2006-09-24 10:19:55 +00:00
75521932f7
adjust indentation
2006-09-24 10:16:21 +00:00
9162ad5359
Typo: WCDD_SECURITY_FREEZE -> WDCC_SECURITY_FREEZE
...
Noticed by Sergey Svishchev.
2006-09-24 08:32:17 +00:00
a3fae2e5b9
blah blah discard pointer qualifier blah.
2006-09-24 06:03:20 +00:00
f135e0d607
Add "name" parameter to powerhook_establish, to aid debugging. No objections
...
on tech-kern@
2006-09-24 03:53:07 +00:00
4c8d1c711c
Don't use // for comments.
2006-09-24 03:42:41 +00:00
f6db1b6893
Use /* ... */ for comment instead of // ...
2006-09-24 03:40:49 +00:00
200c3c464e
Formatting fixups, remove commented out code that should not have been here,
...
and remove a few unnecessary XXX comments.
2006-09-24 03:39:51 +00:00
e057d5fcd9
Tweak the twa(4) driver so that 3ware command line utility works with it.
...
This includes:
- fixing various structure definitions so that the ioctl parameter match
- adding a hw.twa*.driver_version sysctl
- do not refuse multiple device openings, as the management tool will do it.
I'm not sure we are safe. FreeBSD allows multiple openings, and use the
open flag only when an attempt to detach the device is done.
2006-09-23 22:16:35 +00:00
5f5c640d2e
In acpi_pci_link_dump, print out polarity and trigger for the link device
...
properties.
2006-09-23 17:05:33 +00:00
e1d75075c5
Define the "broken IRQ0 override" quirk, and add it for one type of ACPI
...
BIOS.
2006-09-23 17:04:26 +00:00
d197e1ae6b
guard against possible race conditions when detaching SCO pcb's
2006-09-23 16:11:07 +00:00
35e1b8aa38
return ENOTCONN when not connected, rather than EINVAL
2006-09-23 16:08:43 +00:00
9c01d5a7bc
Regen for PR# 15666.
2006-09-23 15:40:16 +00:00
e748bee1f6
PR# 15666: EDIMAX EP-4101 PCMCIA card support (patch included)
2006-09-23 15:39:51 +00:00
696fb7f495
Regen for PR# 27840.
2006-09-23 13:21:29 +00:00
ee203eb22f
PR# 27840: patch for IO DATA PCET/TX-R PCMCIA Ethernet card support
2006-09-23 13:21:01 +00:00
65876ef5bc
PR# 31437: Philips Toucam Pro II is yet another 'audio' USB camera
2006-09-23 13:07:06 +00:00
5425e24592
Use u_quad_t and not uint64_t (even though they might be the same),
...
pointed out by tsutsui@.
2006-09-23 07:54:17 +00:00
52819a126f
a half done wsdisplay driver for Chips & Technologies 65550 graphics chips
...
So far it only uses the blitter for scrolling and rectangle filling,
characters are still drawn in software and there's no support for video
mode switching. Virtual consoles are supported via vcons.
Works fine on a PowerBook 3400c.
2006-09-23 05:12:22 +00:00
5b8b677431
PR# 29516: magma.c comments are wrong, also splhigh is excessive
2006-09-23 04:45:49 +00:00
eaa9b0d13e
Print "interrupt at irq <foo>" message immediately after we establish the
...
interrupt. Patch from PR# 33567.
2006-09-23 01:19:18 +00:00
96568ac6d5
Adjust comment for rnd_add_uint32() to reflect changes in rev 1.50. Fixes
...
PR# 34250 by Jorge Acereda Macia.
2006-09-23 01:13:08 +00:00
7e857903f0
Regen for PR# 23133.
2006-09-23 00:56:42 +00:00
1483b0e7d4
Attach ess(4) for ESS1879 devices; 2+ years late fix for PR# 23133
2006-09-23 00:56:20 +00:00
af7d9594a4
PR/34589: Cliff Wright: vnd(4) compress error with large files
...
Applied slightly different patch (u_int64_t -> uint64_t), thanks!
2006-09-23 00:53:46 +00:00
9033a1369b
In struct vcons_data, don't depend on DIAGNOSTIC and always include
...
switch_poll_count.
okay chs@
2006-09-22 15:16:03 +00:00
f807e82573
regen
2006-09-22 12:44:23 +00:00
33bd80c320
From: Jaime A Fournier: Patch to support SMC 2262WV1
2006-09-22 12:43:52 +00:00
1edb40635e
- Define disk information, disk geometry, and disk partition dictionary
...
schemas. Disk information and disk geometry are designed to replace
information currently conveyed to user space using struct disklabel.
- Add a dk_info member to struct disk; a reference to a disk information
dictionary. This dictionary is to be allocated and the reference stored
in struct disk by individual drivers.
- disk_detach0() will release dk_info if non-NULL.
- Convert the wd(4) driver to stash geometry and other disk properties
as the "disk-info" property in its properties dictionary. This needs
some cleanup, but will serve as an example of what to do with other
disk drivers.
2006-09-22 04:48:38 +00:00
6cf1ffe998
Alter the protocol impemented by prop_kern to allow for bi-directional
...
plist-based messages and to eliminate looping previously required to
receive a plist from the kernel:
- prop_dictionary_copyin_ioctl() and prop_dictionary_copyout_ioctl()
now take the cmd argument rather than the file open flag. The
read-ness or write-ness of an ioctl command is checked by these
routines to ensure that information is being passed to/from the
userland component properly.
- prop_dictionary_copyout_ioctl() now allocates the memory for the
XML plist on behalf of the userland component by way of uvm_mmap().
The XML plist is copied out to the newly-mapped anonymous region,
and the pointer returned via the plistref.
- prop_dictionary_recv_ioctl() is responsible for munmap()'ing the
region after parsing the XML plist into internal represenatation.
- A new prop_dictionary_sendrecv_ioctl() is added, allowing user space
code to send a dictionary to the kernel and receive one back as a
reply.
Update users of prop_kern for the API changes (Bluetooth).
This constitutes an ABI / protocol change -- but this will also be put
into NetBSD 4.0 so that the first proplib release will implement the new
scheme.
2006-09-22 04:20:23 +00:00
295a511be4
Constification.
2006-09-20 05:21:37 +00:00
4b7ccf17f9
explicitly disallow changing the config # when the device is enabled.
2006-09-19 20:34:33 +00:00
661865e783
return errno instead of usbd status
2006-09-19 19:45:48 +00:00
fc13afb3a4
Convert the NetBSD/cats port to use generic TODR.
...
This gets rid of the now-unneded "todclock" and "todservice" attributes
from the footbridge device files, which should allow netwinder to build
again after its conversion to generic TODR.
Resulting kernel verified to boot up OK on gxemul (after my recent
fixes of the gxemul package to emulate free-running timers).
2006-09-19 10:05:32 +00:00
3b1c762eae
Since SPDIF support fo the auixp driver is still half done disable it for
...
now since some chipset revisions will freak out on the aparent
half-initialisation. Even on my machine i can't seem to get the SPDIF led
to light up so something is wrong.
Also delay the setting of the DMA bits until after the codec detection but
before the enabling of interrupts. Note that the dma has to be explicitly
started when the device is opened.
2006-09-18 15:18:52 +00:00
3f9b6523d1
Typo in comment.
2006-09-18 07:47:13 +00:00
2c50610456
Call rt2560_stop() from rt2560_detach(). Fixes a panic on detach of cardbus
...
device on my Vaio. Fix from dyoung@.
2006-09-17 23:58:51 +00:00
f811cc93d1
add bthub(4) and remove btdev(4) entries
2006-09-17 15:01:34 +00:00
06522e0f81
Pass the filesystem time to clock drivers in the todr_chip_handle, so that
...
vax, and pmax can use it.
2006-09-16 00:50:52 +00:00
1860a0e148
Simply use the device name for the workqueue name.
2006-09-15 11:22:21 +00:00
a2f7b2e007
aue_ioctl() for the murpose of adding/deleting multicast addresses is called
...
from interupt context. Defer its processing to a workqueue(9).
This fixes PR 34521.
2006-09-15 10:47:34 +00:00
d1de30eaae
Fix same panic problem as with cd.c when a scsi error happends on
...
read/write action. It would panic on a diagnosic assertion. When a scsi
read/write command fails, the whole extent is gone bad so mark all as not
done.
2006-09-14 17:54:34 +00:00
2dce1200cc
Avoid duplicate collon, from Stephan 'doomwarrior' in PR kern/34518
2006-09-13 14:45:24 +00:00
cf407be292
Convert shark and ofppc to new common ofrtc and MI todr code. Tested
...
on shark. Ok christos@, martin@.
2006-09-13 07:14:35 +00:00
d5978e20f4
- use c99 initializers
...
- add missing initializer
2006-09-13 01:01:20 +00:00
b4c0be5dc8
avoid empty if bodies.
2006-09-13 00:55:57 +00:00
71aa807296
use a c99 initializer
2006-09-13 00:48:03 +00:00
ad28493ad1
guard against a possible situation where the list of l2cap channels is changed
...
when the bluetooth code is not expecting it to be. During a disconnect, we can
detach the channel that is being disconnected, but its not really safe to detach
any others.
2006-09-12 18:18:01 +00:00
4b5125cac5
btsco.c:
...
- sco_getopt(..., SO_SCO_MTU, ...) expects the address of a uint16_t,
not an int. So change sc_mtu's type to uint16_t.
- Try a little harder to ensure btsco_round_blocksize() does not
return zero. Prevents a subsequent panic in audio_init_ringbuffer().
from scw@
2006-09-11 21:59:09 +00:00
26b97f3a17
Added innitialization to bs in ndis_getstate_80211. It was causing a compiler warning. Pointed out by Kulcsar Ferenc
2006-09-11 21:17:18 +00:00
2b551264c1
Aparently i've misread, backing out change.
2006-09-11 19:43:55 +00:00
ed4d8d47a0
also include service name in dictionary being sent to kernel.
...
(this is not used just yet, but it might be in the future and it will
be easier if we dont have to provide code to handle its absence)
2006-09-11 18:30:27 +00:00
5411355304
Don't add one to the capacity returned of READ CAPACITY! it results in
...
reporting a sd* disc that is one sector too big (!) Normally not much a
problem in FFS since its clustered but other filingsystems *do* care.
2006-09-11 17:57:07 +00:00
b9525730ee
deal with 'bool' definitions
2006-09-11 03:37:12 +00:00
c927ff3953
g/c unused SK_{SET,CLR}BIT macros
2006-09-10 18:39:27 +00:00
4f1cbddc12
update to bluetooth device attachment:
...
remove pseudo-device btdev(4) and inherent limitations
add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.
btdevctl(8) and its cache is updated to handle new semantics
etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf
2006-09-10 15:45:55 +00:00
843ed515f0
dsrtc_settime already takes a volatile struct timeval *, also qualify
...
with volatile for dsrtc_gettime.
2006-09-10 14:06:54 +00:00
f4ec8156e1
Add NetBSD RCS tag to top of file.
2006-09-10 11:03:14 +00:00
c231727267
Fix a typo (settime -> gettime) so that we can get time.
2006-09-10 06:39:00 +00:00
11d88bbe54
Add msk(4) info to the sk(4) manpage, and install links (from OpenBSD).
...
Also, add msk to DEVNAMES.
2006-09-09 23:52:27 +00:00
7020797810
Convert to MI clock_ymdhms versions of todr calls.
2006-09-09 21:10:01 +00:00
d5e3d70afd
Add msk(4), a driver for Marvell Yukon 2 gigabit ethernet chips,
...
from Mark Kettenis of OpenBSD. There are still some outstanding
issues with this driver, namely:
- Checksum offload is unsupported
- There is a significant amount of code duplication from sk(4)
- There remain some 'magic numbers'
- Performance is not heavily tested, and likely to be lower than
the chip is capable of in some cases. Syncing some of the
aforementioned 'magic numbers' with the Marvell FreeBSD driver
should help here.
Tested on a motherboard with Marvell 88E8053 ethernet, under NetBSD/i386
and NetBSD/amd64.
2006-09-09 16:17:50 +00:00
c1a02ec4d9
Typo.
2006-09-08 06:38:55 +00:00
25522cfb86
Oeps! I overlooked the size argument of the SCSI call. It ought to be equal
...
to the number of bytes we are reading: READ_DISCINFO_BIGSIZE
sorry.
2006-09-08 00:33:18 +00:00
a5b62cb444
The size of struct scsipi_read_discinfo_data is not even due to the data[1]
...
pseudo array in the structure. The scsi command issued used
sizeof(scsipi_read_discinfo_data) but included thus the last byte that
wasn't going to be inspected anyway. Using the constant
READ_DISCINFO_BIGSIZE fixes the bug.
Even though SCSI adapters *should* accept odd lengths, the Sun U10
(sparc64's) crashes in bus_space_read_multi_stream_2(). That explains the
crash.
NOTE: somewhere in NetBSD/sparc64's atapibus support there is the
assumption on the even size; this needs to be fixed! (Hi Sparc64 portmaster
:-) )
2006-09-07 22:52:46 +00:00
bc22f236a4
Regen.
2006-09-07 21:17:32 +00:00
0fcac2612f
Add the SK-9Sxx Gigabit Ethernet, from OpenBSD.
2006-09-07 21:16:55 +00:00
cb2fb285ec
Workbit NinjaATA-32 busmastering PIO IDE controller driver (njata)
...
This driver supports NinjaATA-32Bi and NPATA-32 chips,
which are used for CardBus ATA interface cards and
CardBus CompactFlash adapters.
2006-09-07 14:22:07 +00:00
6119b65726
Add PIOBM (busmastering transfer using ATA PIO mode) support.
...
The PIOBM is used by only one driver (will be added later,
stay tuned) and intruduce an attribute "ata_piobm" so that
it will be conditionally compiled in.
The "ata_dma" (busmastering transfer using ATA DMA mode) and
"ata_udma" (busmastering transfer using ATA Ultra DMA mode)
attributes are also added for consistency, but unused for now.
2006-09-07 12:46:47 +00:00
bf52851800
Regen from pcidevs rev 1.830.
2006-09-07 12:38:59 +00:00
eee2a035e9
Add Workbit NinjaATA-32Bi and NPATA-32 busmastering PIO IDE controllers.
2006-09-07 12:37:49 +00:00
0a30900857
Add PIOBM (busmastering transfer using ATA PIO mode) support.
...
The PIOBM is used by only one driver (will be added later,
stay tuned) and intruduce an attribute "ata_piobm" so that
it will be conditionally compiled in.
The "ata_dma" (busmastering transfer using ATA DMA mode) and
"ata_udma" (busmastering transfer using ATA Ultra DMA mode)
attributes are also added for consistency, but unused for now.
2006-09-07 12:34:41 +00:00
1a001de39f
Update to new friendlier todr entry points. While here, ANSIfy.
2006-09-07 05:09:29 +00:00
a3925b6374
Updated to new clock_ymdhms support in kern_todr.
...
While here, ansify a few routines.
2006-09-07 05:02:16 +00:00
68c7194a9c
Revert rev 1.9. As pointed out by Izumi Tsutsui, the \n is printed
...
by MD code.
2006-09-07 04:33:55 +00:00
711d816d2d
Switch to friendlier todr ymdhms entry points. Moved a consistency check
...
to common kern_todr.c while here.
2006-09-07 04:29:34 +00:00
f2d329dca0
remove more vestiges of CCITT, LLC, HDLC, NS, and NSIP.
2006-09-07 02:40:31 +00:00
d9aa7ac028
Make timeval argument to todr_settime volatile to keep non-timecounter
...
ports happy.
2006-09-07 01:50:49 +00:00
c7a7101b20
MI part of the Ricoh RS5C313 real time clock todr(9) driver.
...
Based on the code from landisk port. With help from gdamore@
2006-09-07 01:12:00 +00:00
5c5838e690
- Add a couple of XXX comments.
...
- lb->lb_cpu doesn't need to be filled in lockstat_event().
2006-09-07 01:03:02 +00:00
beafae096b
Add the 'lockstat' driver, which collects basic information about lock events.
2006-09-07 00:20:28 +00:00
942bfe3e30
Add support for new todr entry points for drivers- todr_gettime_ymdhms and
...
todr_settime_ymdhms. This allows drivers to avoid repeated conversions, and
allows us to centralize check for Y2038 overflow. As discussed on
tech-kern.
2006-09-07 00:10:49 +00:00
cfba0d26d0
Avoid a panic on adapter check interrupts: the 'tl_restart' callout expects
...
a pointer to struct ifnet, not tl_softc.
2006-09-07 00:00:02 +00:00
e099b5edda
Add \n to end of autoconf message.
2006-09-06 06:26:54 +00:00
50d22dfb8e
Convert time.tv_sec to time_second.
2006-09-05 21:59:51 +00:00
ac9c65b377
Halt the callout on detach
2006-09-05 18:14:57 +00:00
d5dbfe8cbd
Make this work with timecounters.
2006-09-05 17:31:31 +00:00
95ed982c27
Fix two horrible bugs found during a routine audit session with Brett Lymn.
...
First one was incorrectly loading entries -- we were treating each file as
a mount, which resulted in huge mess. I have no excuse for how I didn't
catch this earlier.
Second, use the table name we create for the Veriexec sysctl node and not
the fixed "table0".
Both are fileassoc(9) integration fallout.
2006-09-05 13:02:16 +00:00
f23a530674
Per a suggestion from Manuel, make numBlocks and partitionSize
...
unsigned for now. This prevents rf_reasonable_label() from rejecting
a valid label when these fields have an integer overflow. The reality
is that these need to be 64-bit quantities, but that will come later.
2006-09-05 01:55:21 +00:00
a37acb1b52
Remove unused todr_setcal/todr_getcal and all the assorted stub
...
implementations.
2006-09-04 23:45:30 +00:00
1860a17382
typo in debug printf
2006-09-04 22:51:42 +00:00
16f200486d
Add support for IO-DATA's USB-Serial adapter (USB-RSAQ3),
...
from Keiichi SHIMA.
2006-09-04 15:39:39 +00:00
2f9f5c5846
Remove unused members of sk_softc.
2006-09-04 00:54:40 +00:00
93a520d8b0
fix initializers
2006-09-03 22:17:35 +00:00
e82a0f88ae
add missing initializer.
2006-09-03 21:45:28 +00:00
77c903b90a
add missing initializer
2006-09-03 21:42:55 +00:00
00c11ed953
add missing initializers
2006-09-03 21:42:09 +00:00
c5b9d17001
add missing initializer
2006-09-03 21:38:23 +00:00
ad4f70a8e8
add missing initializer.
2006-09-03 21:30:24 +00:00
2dfeed7693
fix initializers.
2006-09-03 21:28:03 +00:00
b231088be0
add missing initializer
2006-09-03 21:16:09 +00:00
3088ae53a7
- add missing initializer
...
- remove stray semicolon that prevented an ioctl from working.
2006-09-03 21:09:46 +00:00
40be650c67
add missing initializers.
2006-09-03 21:05:01 +00:00
224c7c746b
add missing initializer.
2006-09-03 21:03:11 +00:00
c35f9741bc
add missing initializer.
2006-09-03 21:00:01 +00:00
4e0d743b9e
add missing initializers
2006-09-03 20:59:18 +00:00
2aee9a0f50
Back out rev 1.149.
...
From various discussion about vndstrategy (see
http://mail-index.netbsd.org/tech-kern/2005/03/29/0034.html
http://mail-index.netbsd.org/tech-kern/2005/03/23/0015.html )
it's not correct to tsleep() in a strategy routine, which may be called from
interrupt context.
Unfortunably this reopens PR/10731, PR/12189, PR/20296, PR/34293
As for what the correct fix it, this needs to be analysed deeper. I suspect
throttling the caller in vnd only hides the problem; the same caller writing
to some other device could exaust all buffers as well. If this driver doesn't
need to allocate buffer this won't cause a deadlock, but it's bad for
performances on systems with e.g. multiple drives. Also, others stacked
block device drivers may also have this issue.
2006-09-03 19:49:34 +00:00
bedc649eed
stop attaching when a bus_dma operation fails, instead of using bogus
...
addresses.
Remplace vtophys() with proper bus_dma(9) use.
This driver now works properly on Xen
2006-09-03 19:06:32 +00:00
452f35b603
Regen
2006-09-03 18:30:54 +00:00
44522b1f90
* Add support for ICH8 and ICH8M SATA/RAID controllers.
...
* If the controller is in AHCI, ask for SATA IDE mode of operation.
jsg@openbsd says:
"X60/T60 Thinkpads are shipped in AHCI configuration by default,
this makes them work without changing a BIOS option."
Tested by eye of the beholder. From OpenBSD.
Ok'ed tls.
2006-09-03 18:30:35 +00:00
1b5905d05b
Add RASQ3 variant of PL2303 serial
2006-09-03 18:30:23 +00:00
dacb75acff
All ports that use the file do so through files.pckbport, so there's no
...
need to be cautious about including "pckbd.h". This has the side-effect
that ports using pckbd but not defining __HAVE_NWSCONS will now get pckbd
attached as console if they call pckbport_cnattach(), but I don't think
any such ports exist.
2006-09-03 13:23:15 +00:00
02fa0947d7
Add support for PDC40519 and PDC40779... from obsd.
2006-09-03 12:18:03 +00:00
4769f26cd2
regen
2006-09-03 12:14:32 +00:00
3a3373ee8e
Add missing PDC20265 device... removed accidentally in previous.
2006-09-03 12:13:56 +00:00
5a91328568
regen
2006-09-03 12:02:53 +00:00
4e23c01c3f
Add some missing devices from Promise and sort them.
2006-09-03 12:02:30 +00:00
f42bb991ca
regen
2006-09-03 10:20:13 +00:00
af16e7909e
Add some ICH8 devices... from obsd.
2006-09-03 10:19:26 +00:00
fdcb59bf6d
Add support for nvidia MCP61/65 IDE/SATA Controllers.
2006-09-03 08:42:32 +00:00
bbdb91feca
regen
2006-09-03 08:39:15 +00:00
316d722a4c
Erm forgot to add MCP61/65 SATA Controllers and sort them.
2006-09-03 08:38:52 +00:00
7465ee1052
regen
2006-09-03 08:10:47 +00:00
4b06824243
- Add all pciids for nvidia MCP61/65 controllers, from obsd.
...
- Improve description in all them.
2006-09-03 08:10:18 +00:00
ea4f30c7b7
Add support for MCP61/65 controllers... from obsd.
2006-09-03 07:42:04 +00:00
3a6aed3622
regen
2006-09-03 07:36:34 +00:00
e85b72eeee
- Add nForce MCP61/65 LAN controllers... from obsd.
...
- Improve description in some nForce controllers as well.
2006-09-03 07:36:10 +00:00
92a6344549
add missing initializer
2006-09-03 07:14:47 +00:00
08a78fe175
use c99 initializers
2006-09-03 07:13:46 +00:00
6e6fde1336
add missing initializer
2006-09-03 07:07:20 +00:00
db87199efc
use c99 initializers
2006-09-03 07:06:39 +00:00
80d7cf4588
- add missing initializer
...
- add missing function decl
2006-09-03 07:05:16 +00:00
bbf2deb35f
- add missing initializer
...
- inline comes first
2006-09-03 07:02:54 +00:00
0c58aff5f5
add missing initializers
2006-09-03 06:46:22 +00:00
328ed75351
add missing decl
2006-09-03 06:42:44 +00:00
05bd5641dd
add missing initializers
2006-09-03 06:41:38 +00:00
48c3e87853
add missing initializer
2006-09-03 06:26:27 +00:00
01edefa570
comment out unreachable code
2006-09-03 06:23:27 +00:00
996634386c
comment out unreachable code.
2006-09-03 06:22:05 +00:00
4905e82e29
add missing initializer
2006-09-03 05:30:48 +00:00
c11c8c78df
add missing initializers
2006-09-03 05:29:46 +00:00
b3d983dd18
add missing initializer
2006-09-03 05:24:47 +00:00
5b7c1e90d5
add missing decl.
2006-09-03 05:23:59 +00:00
4ac9cd5ebe
add missing initializer
2006-09-03 05:20:21 +00:00
7ed28205b6
- add missing initializer
...
- comment out impossible comparison
2006-09-03 05:19:38 +00:00
144543fb61
add missing initializer
2006-09-03 05:18:03 +00:00
60dfc6ed9c
add missing initializers
2006-09-03 05:16:01 +00:00
eb7cb3e07d
- add missing initializers
...
- remove impossible comparison
2006-09-03 05:12:54 +00:00
624d950194
add missing initializer
2006-09-03 05:11:30 +00:00
26733bed2e
- comment out impossible comparisons
...
- remove superfluous if statement
2006-09-03 05:10:24 +00:00
7de21598de
- add missing initializer
...
- correct function decl.
2006-09-03 05:04:57 +00:00
93582079db
add missing initializer
2006-09-03 05:02:21 +00:00
309d51fb22
add missing initializers
2006-09-03 04:56:33 +00:00
2ef37e3f61
use c99 initializers
2006-09-03 04:52:14 +00:00
a96f0dc641
avoid empty if statements
2006-09-03 04:27:11 +00:00
3cd45450e8
redo with c99 initializers
2006-09-02 18:59:46 +00:00
bd4bd1bf9d
- comment out impossible comparison
...
- add missing initializer
2006-09-02 18:58:02 +00:00
5ec7f32544
add missing initializers
2006-09-02 17:02:57 +00:00
05670fe773
Remove unused variable to make this build again.
2006-09-02 09:26:47 +00:00
b6994507c5
add missing initializer
2006-09-02 07:23:53 +00:00
faec8658c7
- fix incomplete initializer
...
- static goes first
2006-09-02 07:10:51 +00:00
0668b0a2e0
static goes first
2006-09-02 07:08:39 +00:00
7d1781d944
- fix incomplete initializer
...
- static goes first
2006-09-02 07:07:33 +00:00
b5da945622
comment out unreachable code
2006-09-02 07:06:03 +00:00
a91b63349c
add missing initializer
2006-09-02 07:04:46 +00:00
a569a4d291
add missing initializer
2006-09-02 07:01:20 +00:00
9f681d6f65
comment out impossible code
2006-09-02 07:00:23 +00:00
489fe1e988
add missing initializers
2006-09-02 06:56:30 +00:00
b819e0b190
Add missing initializer
2006-09-02 06:54:18 +00:00
ff25c8d7b7
s/dreamcast/sh3/ to cover landisk.
2006-09-01 20:28:14 +00:00
49b2425f19
Use an unsigned int for the blksize on read_cd_capacity.
2006-09-01 03:29:32 +00:00
013444d78c
Remove the declaration of an unused local variable 'reg'.
2006-09-01 03:24:58 +00:00
0b228f5987
Fix panic on reading/writing to a (raw) CD device and encountering an
...
error. It now correctly sets bp->b_resid to the full size of the buffer.
The failed SCSI read/write command allways contains the complete buffer.
When encountering a read (or write) error, the scsipi stack sets the
xs->resid to zero since the command has been accepted by the drive. The
scsi command set does not allow a partial read or write to be performed and
will signal a success or an error.
2006-08-31 21:32:42 +00:00
e3b1c755c2
Remove two spurious empty lines in functions
2006-08-31 20:22:34 +00:00
055cdf5d13
Fix fencing bug on CD disk size; the comment was wrong, its the *length* of
...
the device and since we count from zero its equal to the number of sectors
and thus one higher than the last sector.
This fixes the read/write problems on the (raw) device where the last
sector was not readable/writable.
2006-08-31 19:46:54 +00:00
8cd106d3d2
Per discussion on tech-kern and tech-userlevel, move the bit-twiddling
...
macros, __BIT, __BITS, SHIFTIN, SHIFTOUT, and __arraycount() from
lib/libkern/libkern.h to sys/cdefs.h. Add a __-prefix to SHIFTIN
and SHIFTOUT, and add a manual page for the bit-twiddling macros,
bits(3).
Make the __BIT and __BITS macros "widthless," as best I can, by
changing their type to uintmax_t from uint32_t. XXX The manual
page lags this change by a bit.
Define __PRIxBIT and __PRIxBITS printf(3) format strings.
2006-08-31 19:24:37 +00:00
3d36667ef9
Appease GCC4 by making /* NOTREACHED */ code return 0.
2006-08-31 18:31:59 +00:00
cc8a477ce5
Add quirks for the Phobos GIO Fast Ethernet boards.
2006-08-30 23:32:07 +00:00
e980865174
Phobos boards (my G130 at least) have a non-standard srom layout. Try to
...
identify it and pull out the enaddr.
2006-08-30 23:31:08 +00:00
75e28cc7ed
Make this compile again when TLDEBUG is defined.
2006-08-30 23:29:01 +00:00
999bb1e465
It seems that EHCI at least will complete a empty transfer with
...
status == NORMAL_COMPLETION.
Guard against that.
2006-08-30 19:42:37 +00:00
738af19b41
fix initializers.
2006-08-30 19:25:46 +00:00
a2b752877c
fix incomplete initializer.
2006-08-30 19:16:03 +00:00
e6aa223b06
- fix initializers
...
- comment out dead code.
2006-08-30 17:07:33 +00:00
514b3fccd7
fix initializer
2006-08-30 17:00:15 +00:00
9d7a9c4079
fix initializers
2006-08-30 16:59:34 +00:00
ce149b700c
fix initializers.
2006-08-30 16:55:06 +00:00
bf74b6c774
add missing initializers
2006-08-30 16:51:24 +00:00
048533a23b
complete initializers.
2006-08-30 16:49:07 +00:00
989f6e4d42
avoid empty if body.
2006-08-30 16:45:40 +00:00
26f4467d26
fix initializers.
2006-08-30 16:43:56 +00:00
a7239032fa
Fix initializer
2006-08-30 16:42:04 +00:00
e9198d13b8
fix initializer.
2006-08-30 16:38:23 +00:00
46d616fab0
fix incomplete initializers.
2006-08-30 15:46:58 +00:00
13714b86fb
comment out impossible comparison.
2006-08-30 15:27:18 +00:00
f5d9b98eb1
add missing initializer
2006-08-30 15:25:58 +00:00
c1d5ec6516
add missing initializers.
2006-08-30 15:14:11 +00:00
5bfce2e9a7
fix incomplete initializers
2006-08-30 02:15:33 +00:00
ca858a7e11
static goes first
2006-08-30 02:13:20 +00:00
ee0887af27
fix missing initializer
2006-08-30 02:11:42 +00:00
afca61baba
add missing initializers
2006-08-30 02:09:40 +00:00
366af49b8e
- fix missing initializations
...
- remove stray semicolon, that screwed up error checking
2006-08-30 02:08:20 +00:00
2e252670b5
static goes first
2006-08-30 02:00:26 +00:00
1158495345
fix order of decl
2006-08-30 01:59:06 +00:00
37fbc95466
add missing initializer
2006-08-30 01:27:56 +00:00
0340a0cbcd
fix incomplete initializer
2006-08-30 01:24:40 +00:00
d76c7ff74a
- fix missing initializer
...
- fix < 0 comparison with unsigned
2006-08-30 01:14:24 +00:00
b80f5be1eb
fix incomplete initializers
2006-08-30 01:10:46 +00:00
f202705964
fix incomplete initializer
2006-08-30 01:09:39 +00:00
f432f36f7f
missing comma
2006-08-30 00:54:28 +00:00
a87d6a05e0
fix incomplete initializers
2006-08-30 00:53:47 +00:00
976d4b3f1c
- fix incomplete initializer
...
- remove unsigned comparison < 0
2006-08-30 00:51:48 +00:00
16f3fda8be
fix incomplete initializers
2006-08-30 00:42:41 +00:00
2ddf5cde1a
fix incomplete initializers.
2006-08-30 00:41:46 +00:00
15a77ddab7
fix incomplete initializer
2006-08-30 00:40:56 +00:00
cb09e23ee7
fix incomplete initializer
2006-08-29 23:45:23 +00:00
c65db33038
fix incomplete initializer.
2006-08-29 23:42:18 +00:00
f649f50b35
fix incomplete initializer
2006-08-29 23:41:12 +00:00
8009229e9b
The Fujitsu drive in my A540 supports sync transfers but apparently
...
doesn't advertise this in INQUIRY. It makes it nice and obvious with
SDTR, though, so add it to the list.
2006-08-29 20:40:23 +00:00
eda93ea91b
those should have been committed along with radeonfb.c
...
doh
2006-08-29 17:09:33 +00:00
10bb91db88
- use RADEON_DEFAULT_MODE when no EDID data available
...
- let only root mmap PCI resources through wscons
- allow IO access on macppc
2006-08-29 00:50:29 +00:00
f7747a2a56
fix incomplete struct decl.
2006-08-28 21:37:37 +00:00
a0917ad69e
fix incomplete initializers
2006-08-28 21:33:16 +00:00
4c2420029f
Add duplicate include protection to <dev/sun/kbio.h>.
...
Make the x68k port use this include file, so that what remains
is only the port-specific additions.
2006-08-28 17:15:24 +00:00
4493c76313
Use the common <dev/sun/vuid_event.h> header file instead of maintaining
...
separate copies in port-specific directories. Add duplicate include
protection. Makes the alpha and atari ports build usr.bin/kdump/ again.
2006-08-28 16:41:04 +00:00
6c90d7030b
Remove unused variable 'periph' to make this build.
2006-08-28 11:45:38 +00:00
f2c2a49a27
Make suspend/resume work properly for bt3c device.
...
Since state is kept inside the device that will be lost, we need to
flush all information relating to this controller from the protocol
stack.
2006-08-28 10:34:33 +00:00
df7450f605
Fix uninitialized variables.
2006-08-28 02:58:16 +00:00
4e4ed26fac
add missing initializer
2006-08-28 00:38:47 +00:00
6ab0a579ce
Add missing initializer.
2006-08-28 00:22:15 +00:00
87fd29be14
static goes first.
2006-08-28 00:18:30 +00:00
f7db588ec4
add missing initializer.
2006-08-28 00:14:50 +00:00
d3b80ef998
remove impossible conditional
2006-08-28 00:10:20 +00:00
6e913df162
remove unreachable code.
2006-08-28 00:08:38 +00:00
a19f83e53b
add missing initializer.
2006-08-28 00:07:35 +00:00
63f68a892b
remove unreachable code.
2006-08-28 00:06:14 +00:00
78cdbd8e9c
add missing initializer.
2006-08-28 00:04:21 +00:00
7546f55be3
add missing initializer
2006-08-28 00:01:36 +00:00
2735c71895
static comes first.
2006-08-28 00:00:23 +00:00
a98a1f3b7b
Add missing initializers.
2006-08-27 23:59:40 +00:00
ff62f5c658
add missing initializers.
2006-08-27 23:54:50 +00:00
d137310d6b
add missing initializer
2006-08-27 23:53:10 +00:00
ca960afcce
Oops, this is not ready yet.
2006-08-27 23:51:31 +00:00
72c8baf57c
Add missing initializer
2006-08-27 23:50:53 +00:00
cdda2124d1
Fix incomplete declaration.
2006-08-27 23:33:35 +00:00
4a778ebf9a
- static needs to be first
...
- complete the cdevsw
2006-08-27 23:31:15 +00:00
c689e59cb9
restructure ifdefs
2006-08-27 23:27:44 +00:00
1624b1a623
typo
2006-08-27 23:23:48 +00:00
d22d88fc75
ifdef out unreachable code.
2006-08-27 23:23:02 +00:00
35f0d726a8
complete initialization
2006-08-27 23:21:35 +00:00
925d11f2f5
complete declarations
2006-08-27 23:19:03 +00:00
ec7d898cf1
Complete the declaration.
2006-08-27 23:13:47 +00:00
7e11d29fc2
Delete unsigned comparison with < 0
2006-08-27 22:33:49 +00:00
b42a1dca38
Revert revision 1.4: it seems to have caused serious problems on sgimips,
...
so I should probably leave it until I get my Indy going.
2006-08-27 22:32:54 +00:00
d5ca3efd41
undo previous. Andy says the struct is used in pkgsrc.
2006-08-27 21:39:39 +00:00
1b3d66a467
Sprinkle _KERNEL.
2006-08-27 20:32:44 +00:00
9db6f7d836
#ifdef out unused ioctl (and wrong)
2006-08-27 20:26:34 +00:00
9c90e26bcf
Fix typo
2006-08-27 20:11:31 +00:00
52975efd5a
Grr. Don't define _KERNEL! Most of the kernel files do #ifdef _KERNEL
2006-08-27 19:19:47 +00:00
06869f0ad3
don't call variables errno! including from userland breaks things!
2006-08-27 19:18:08 +00:00
b34c6cdc81
PR/34293: Michael van Elst: vnd deadlocks on I/O buffers
...
Also fixes: PR/10731, PR/12189, PR/20296
Sleep while there a buffer shortage.
2006-08-27 18:45:20 +00:00
f61564f6ba
Initialize a variable to 0 to appease gcc4 with -O3.
2006-08-27 17:05:39 +00:00
f379f539d2
Use symbolic names for CSR values after reset.
2006-08-27 13:13:36 +00:00
c980b109dd
BluetootH SCO Audio update.
...
Provide an ioctl to set the SCO mtu value in the controller and
place limits in the SCO code such that only packets of this size
may be sent.
Move the mtu option from btsco(4) and btdevctl(8), to the
btconfig(8) program.
Remove temporary BLUETOOTH_SCO kernel option, and enable SCO
socket access.
Fix incoming connection handling for btsco(4) and SCO sockets.
Fix documentation to reflect the new world order.
2006-08-27 11:41:58 +00:00
5616d106f8
acorn26 hasn't had sbic since before it became acorn26.
2006-08-27 10:14:20 +00:00
52c2319234
Regen
2006-08-27 08:16:44 +00:00
8270ea8a29
PR/34289: Stéphane Witzmann: Add some missing PCI devices in pcidevs
2006-08-27 08:16:16 +00:00
ecdff16f80
- use dk_lookup instead of our home-spun version.
...
- allow raid to be configured in a wedge
- allow wedges to be configured in a raid
- add autoconfiguration of wedges in a raid
2006-08-27 05:07:12 +00:00
b7a6606cb6
Add horrible hack for wedges. Why is the block device of the wedges in use?
2006-08-27 05:00:00 +00:00
1a789da3ec
Use dk_lookup.
2006-08-27 04:58:40 +00:00
eb74489b57
When receiving a SCSI message, it's important not to deassert ACK on the last
...
byte until we've worked out what to do with the message, since if we plan
to reply to it we have to assert ATN before deasserting ACK. Implement this.
2006-08-26 23:55:22 +00:00
286856d098
QAS REQUEST is a one-byte message. Make MSG_IS1BYTE recognise this.
2006-08-26 23:32:55 +00:00
604c7b6558
Use standard MSG_IS1BYTE, MSG_IS2BYTE, and MSG_ISEXTENDED macros rather
...
than rolling our own.
2006-08-26 22:37:07 +00:00
c981542cbe
Use the 'z' size modifier when printfing size_t, so that GCC doesn't complain
...
on systems were size_t isn't unsigned int.
2006-08-26 22:33:18 +00:00
2cd3c4f0e6
Move the sgimips "sbic" driver from arch/sgimips/hpc/sbic.c to
...
dev/ic/wd33c93.c. This may not be the best WD33C93 driver we've
got, but it's the most recently worked on and probably the most
portable, so it seems like a good basis for further work (and in
particular an acorn26 driver for the Acorn SCSI card). There's
no functional change in this commit, and sgimips kernels still
compile.
2006-08-26 22:06:36 +00:00
dace278549
PR/34292: Aaron Hodgen: twa driver incorrectly reports drive size/description
2006-08-26 19:35:51 +00:00
df667bafa9
In sk_watchdog(), attempt to reclaim pending TX descriptors before
...
resetting the hardware. Should fix occasional watchdog timeouts
seen with this driver.
From FreeBSD, via OpenBSD.
2006-08-25 20:16:57 +00:00
62cb42312d
Cleanup, with no functional changes:
...
- remove unused code
- KNF
- ANSI function declarations
- replace printf() with aprint_error() except in debug functions
- a few minor indentation/whitespace changes
2006-08-25 02:34:30 +00:00
0284fe298f
Regen (Marvell product IDs)
2006-08-24 22:40:59 +00:00
4a163d3c68
Add a bunch of Marvell product IDs, from OpenBSD.
2006-08-24 22:40:20 +00:00
f7434c5451
avoid diagnostic panic if both blk and chr wedge are open at the same time
2006-08-24 21:57:11 +00:00
b223d41e99
gettime and settime functions are meant to return errno values. Make
...
the pcf8583 ones do so.
2006-08-23 21:21:34 +00:00
f73c6e5980
Change iostat_alloc() to take the parent pointer and the name directly, so
...
that callers are not responsible for initializing the fields. Store the name
inside the struct instead of maintaining a pointer to external storage, or
leaked memory (nfs case).
2006-08-23 17:19:32 +00:00
f0f1731b24
Acting as Elad's keyboard:
...
Place the securelevel checks in their logical locations.
This will be clearer in the future when code changes to use kauth(9) calls.
input and okay ad@
2006-08-23 15:44:29 +00:00
7db2b0d746
Regen (Broadcom NetXtreme II).
2006-08-23 13:55:48 +00:00
jmcneill