with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
[bsd-aout.h elf.h endian.h exec.h float.h ieeefp.h limit.h pcb.h proc.h]
[profile.h reg.h regdef.h setjmp.h stdarg.h vmparam.h]
plus (missed one:)
ecoff.h
with versions that include equivalent files from <mips/include>.
(cvs magic copied the previous revisions, with history, to
src/sys/arch/mips/include).
bsd-aout.h elf.h endian.h exec.h float.h ieeefp.h limit.h pcb.h proc.h
profile.h reg.h regdef.h setjmp.h stdarg.h vmparam.h
the NetBSD-1.1 convention. Change the mainbus `struct confargs'
and the "generic" interrupt-establish method, used by devices that
appear on both a kn01 and TC decstations, to match.
Change the macros in autconf.h accordingly.
Add new device-attach struct cfattach le_tc_ca and struct cfdriver le_cd.
Change IOASIC cfdriver references from "ioasiccd" to "ioasic_cd".
Change "mainbuscd" to "mainbus_cd"
update the old-config to new-config glue used with the 4.4bsd/pmax
SCSI drivers to use new device attach declarations and names for
the "oldscsibus", "tz" and "rz" drivers.
change tc_submatch() to compile with the new device-attach scheme:
the TC bus uses a 'submatch' function which checks device locators
and then calls a match function.
Instead of calling cf->cf_driver->cd_match(), we now need to call
cf->cf_attach->ca_match().
Rename the extern declaration of `tccd' and `ioasiccd' in
src/sys/dev/tc/{tvar.h,ioasicvar.h", respectively, to be
`tc_cd' and `ioasic_cd', to match the 1.1B-style definitions.
only include the relevant code in the probe & attach functions. Still
one probe and one attach function, with #ifdefs, but this is a step
in the right direction and saves a few hundred bytes (ooh, ahh!).
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
return does not work anymore under gcc-2.7.2. Change such functions
to use __attribute__((__noreturn__)). In addition add appropriate
__attribute__ adornments to printf like functions... This generated
another barrage of compiler warnings in printf bugs that I will
promptly fix.
they're base I/O ports, not really addresses. rather than using those
softc fields directly, assign local variables (asicbase, nicbase) to have
their values, and use those. (consistency, plus better optimization
potential in some cases.)
eventually. rename the probe functions for the various boards to 'find' for
consistency/correctness (but the generic8390 check is still a 'probe').
Add protos for ed_find(), ed_probe_generic8390(), ed_find_WD80x3(),
ed_find_3Com(), and ed_find_Novell(). Fix one minor space nit.
which represents the "keyboard controller". Give "pc" and "vt" drivers
the "pckbd" attribute. In pcattach() (pccons and pcvt), attach children
of the keyboard controller.
NetBSD -> 199603
NetBSD1_1 -> 2 (corresponds to 1.1A)
The latter should have been done a while ago. Expect this to change again
within the next couple of days.
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).
Also, remove static sb_device structure and fill in user's buffer on
each request.
ends of lines, turn aligned blocks of eight spaces into tabs, name all
softc elements with the "sc_" prefix, and call the softc by the commonly
used name, "sc", when passing it around.
instructions which have to be emulated by the operating system on that
chip. This code will still run on M68020, M68030 and M68040, but
might be a bit slower on those chips.
trivial multicast support, and support for xon/xoff output flow
control to the PPP subsystem. Fixed several bugs, including making
the accumulation and resetting of statistics more consistent. State
for the VJ compressor is now dynamically allocated.
prototype in sys/systm.h (which was just put in in by christos)
with revision 1.43 of sys/systm.h
revision 1.43
date: 1996/03/14 18:59:12; author: christos; state: Exp; lines: +1 -3
systm.h: Bring Debugger() prototype into scope.
- softclock was called with extra argument.
- missing %x formats in printf's
- kgdb_copy called with only two arguments.
Fix conf.c so that it used the _conf.h files from other places instead of
rolling its own.
conflict with the floppy driver.
conf.h: Protect against multiple inclusions. The reason will become apparent
soon.
systm.h: Bring Debugger() prototype into scope.
hook (pci_md_attach_hook()) to do any machine-dependent attachment
gunk, e.g. on the i386 printing out the configuration mode (if bus 0)
(2) don't pass max device number for a given bus in, use
PCI_MAX_DEVICE_NUMBER, which can be defined on a per-machine basis.
(defaults to 32. on i386, it's 32 if pci conf mode == 1, 16 if 2.)
pcibus and pci.
(2) remove the #ifdef i386 from pci.c, and provide a machine-dependent
hook (pci_md_attach_hook()) to do any machine-dependent attachment
gunk, e.g. on the i386 printing out the configuration mode (if bus 0)
(3) don't pass max device number for a given bus in, use
PCI_MAX_DEVICE_NUMBER, which can be defined on a per-machine basis.
(defaults to 32. on i386, it's 32 if pci conf mode == 1, 16 if 2.)
cpuswitch() simplified, now pushes and pulls a switchframe structure
on entry and exit. Added extra comments to indicate the states of
various registers throughout cpuswitch().
Added proc_trampoline function.
memory test apparently causes hangups on some etherH interfaces.
Until this can be debugged with an offending interface the memory
test can be bypassed.
directory problems.
XXX There is no clean solution to the cookie/cookieverifier validity mess.
Together with the disabled strict cookie check, this puts us back at
what v2 did in this case. Slightly better solution possible by
consequently storing 64bit cookies in other places too.
This shouldn't break anything; I find ... grep ... all the relevant
kernel sources subdirecotry trees I could think of for the defines
that don't use the new FSLW or FPF6 prefix. But in case it does anyway,
tell me immediately.
we want it (we don't support the 020 without an 851 anyway). Note that
M68030 no longer implies support for 020+851.
This also allows us to compile with -m68030 iff M68020 isn't specified
in the config file.
jonathan