0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
b12ed6c03b
Make it possible to move a device to its unconfigured state by
...
using config #0 .
2000-04-23 00:46:59 +00:00
bc5e86601e
Add an item.
2000-04-22 22:52:15 +00:00
3a27942ba8
Add a clarifying comment.
2000-04-22 22:50:44 +00:00
8ec60a189f
Make sure the payload is aligned when using E2-over-802.11 encapsulation,
...
as enabled by the LINK0 flag. Fixes PR kern/9700.
2000-04-22 22:36:14 +00:00
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
11379e0ab6
Add the famous "rl" disk.
2000-04-22 16:46:45 +00:00
84f24d3c29
The D-link serial adapter lies about being self powered. It's obviously
...
bus powered. How can we do power budgeting when the devices lie?
2000-04-21 21:02:44 +00:00
60bb0d050d
Add some comments.
2000-04-21 20:58:56 +00:00
d592132506
the status register is _always_ at 0x420 -- grr. How should I put this in the config file rather than hard-coded?
2000-04-21 20:13:41 +00:00
46fb8de93a
Use a 255 ms interrupt interval even if the descriptor in the hub asks
...
for something else, because the spec says that it should be 255.
2000-04-21 19:51:43 +00:00
6bc85d9fa0
Minor nit: Use another TAB in formatting to make the columns straight.
2000-04-21 19:49:59 +00:00
171d9f6a3f
First version of keep-track-of-used-devices file.
2000-04-21 19:05:43 +00:00
4379f92630
Make sure to read the full hub descriptor (including the deprecated field).
2000-04-21 18:57:40 +00:00
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
cd5411b382
Script assembler for the NCR 53c7xx/8xx scsi controller. Initial work
...
done by Michael L. Hitch, support for the 8xx and some improvements
by me.
2000-04-21 17:50:07 +00:00
1118b3ee75
Add driver for Addonics FlexPort 8S (and probably 4S, but not tested)
2000-04-21 17:48:30 +00:00
3d9d091685
Change the exact sequence of commands when a hub is attached to follow
...
Windoze more closely. This makes more devices work.
After two years of doing USB work I've finally access to a USB protocol
analyzer. Which means I should be able to mimic what Windoze does in
certain cases instead of just following the specs. Following the specs
is not enough since the devices often don't.
2000-04-21 16:05:50 +00:00
878deae672
Add a define for some slack port power up time.
2000-04-21 16:01:31 +00:00
9fb474fcf0
Regen.
2000-04-21 15:59:43 +00:00
f791a72b9c
Change error reporting in port reset function.
2000-04-21 15:58:55 +00:00
3f08804668
Pretend we know how to turn on port power (it's always on).
2000-04-21 15:40:01 +00:00
fdeba432d2
Add a comment about a non-obvious use of a #define.
2000-04-21 15:38:55 +00:00
d744db2ea9
Add D-link serial adapter (made by someone else :).
2000-04-21 15:37:50 +00:00
e1950d4ffa
regen.
2000-04-20 23:40:27 +00:00
3e4e60beeb
Add Zip 250.
2000-04-20 23:39:50 +00:00
13c39a5cb6
Put the rasops attributes in conf/files so that everyone can run
...
config(8) without pulling in files.rasops. There is prior art for
this, e.g. audio.
2000-04-20 18:23:37 +00:00
3e49436f9d
Replace rcons console code with rasops console code.
...
Console text should now be supported on all TGA cards;
8- and 32-bit TGA and 8-bit TGA2 have been tested.
Implement accelerated character drawing, scrolling, and clearing.
Stop clearing "odd" in VHCR; it's unnecessary and hurts performance.
Use bus_space_vaddr() instead of a local hack.
2000-04-20 05:25:20 +00:00
173c535a95
Add one, remove some.
2000-04-19 16:17:45 +00:00
784977f319
Changes the name of RealTek driver. The new name is `rtk'. This used
...
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.
This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.
2000-04-19 08:44:31 +00:00
5803932005
Regen
2000-04-19 07:52:33 +00:00
01beba012a
Add some Symbios devices.
2000-04-19 07:51:20 +00:00
a2bf544200
Allocate the variable `inqbuf' in scsi_probedev on stack rather than
...
statically. Since this function may called for another luns immediately,
allocating it statically doesn't make sense and may cause race condition
as pointed out by PR#9749.
2000-04-19 04:49:50 +00:00
debe6e88b6
Calculate an offset of mailbox_in correctly by renaming BHA_MBO_OFFSET
...
to BHA_MBX_OFFSET and using it also for mailbox_in. Since all mailboxes
should be placed in a single continuous memory due to a hardware limitation,
an offset of any mailbox can be/should be calculated using a same expression.
2000-04-19 02:39:12 +00:00
edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
5845348e54
Revert last change (the last change was not necessarily desirable, and
...
had some other minor side-affects that were troublesome).
2000-04-17 19:35:12 +00:00
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
0ba1516cd7
Use a default attribute to restore the display mode to original settings.
...
Also, pass in WSATTR_COLORS at all times when allocating screen attributes
since without it we cannot even get black-on-white from rasops(9).
2000-04-16 21:49:49 +00:00
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
0aae0cd7a6
only print packets if debug > 1
2000-04-16 17:03:42 +00:00
thorpej