1b02e0a7db
Build biosboot_com0 too.
2000-01-15 01:17:12 +00:00
5d8a0c0ddd
add a function which prints out the memory descriptors (for debugging)
1999-12-21 14:22:54 +00:00
e5bc2ce76f
add support for 3c905b-Combo
1999-12-02 13:21:48 +00:00
262d9092fc
add media definition for 100baseTX
1999-12-02 13:20:56 +00:00
6816b631ab
Nit: Make bootrealseg conforming.
1999-11-07 01:06:37 +00:00
db5d01fc72
back out the "ep"/"ex" guessing part of the previous - the check was
...
removed from the kernel and the device name is only informational now
1999-11-05 22:57:39 +00:00
3c702c1d8d
Recognize the 3c595, and use `ex' for 3c90x now.
1999-11-03 12:38:54 +00:00
dfc00b5b24
Back out the GDT changes in the previous. Didn't mean to commit that.
1999-11-03 09:55:32 +00:00
1ee8f66dfe
Picking a few nits...
...
* The direction flag wasn't set right in the presence of ROMDEBUG.
* There were missing data32's.
* We weren't as careful as we should be with relocations.
1999-11-03 09:28:15 +00:00
e6d27a3a83
correct debug printf() to make it compile with DISK_DEBUG again,
...
closes PR kern/8718 by Takahiro Kambe
1999-11-02 16:52:25 +00:00
093997a6f6
Remove totally gratuitous check on the unit number in dev2bios().
1999-10-28 05:20:05 +00:00
353a512c22
create "machine" symlink
1999-10-25 20:27:48 +00:00
2c0e7cf113
allow to set boot timeout and password, following PR port-i386/8196
...
by Stephan Thesing
1999-09-10 16:45:27 +00:00
3e60c834ed
install /boot -r-------- for security reasons
1999-09-10 16:41:10 +00:00
4486b15211
-make ustarfs optional (enabled per default) for cases where space is
...
scarce
-make the boot timeout patchable
-optionally, call checkpasswd() before the boot menu can be accessed
(The latter 2 follow PR port-i386/8196 by Stephan Thesing.)
1999-09-10 16:38:46 +00:00
5c48b9a115
improve awaitkey()'s printout for >9 seconds
1999-09-10 16:23:55 +00:00
2914ef7fd2
sync with changes to if_fxp header,
...
thanks to <ks@ub.uni-mainz.de> for testing
1999-09-10 09:12:44 +00:00
9efd996351
spelling
1999-09-07 18:27:58 +00:00
5663256d0a
Unlike in an i386 a.out assembler, where in an .align n directive n is meant
...
to be the logarithm to base 2 of the alignment, in an ELF environment n is
the actual alignment boundary; thus, adjust the directives accordingly.
Albeit the wonderful i386 architecture doesn't mind the smaller alignment in
an obvious way, it is likely to have resulted in some performance penalty
during the a.out->ELF transition.
1999-08-23 08:24:36 +00:00
29a8d333b6
put biosdiskclose() inside LIBSA_NO_FS_CLOSE
1999-08-03 19:46:22 +00:00
7dab8cef61
fix logics in device recognition
1999-07-15 18:00:27 +00:00
0dc60ae78c
Build bootblocks to always use COM0 for console.
1999-07-11 01:23:53 +00:00
f93a90f888
Use same Makefile for biosboot_com0 too.
1999-07-11 01:22:45 +00:00
6211cd566c
fix creation of DOS / ROM images from ELF executables: use "objcopy"
1999-07-08 14:32:28 +00:00
2f1646ea98
Remove -DDEBUG
1999-07-06 14:37:05 +00:00
c867e93fae
Pickup changes from ../biosboot/Makefile and add .PATH so that source
...
files are found. Now this compiles ok (have yet to run the blocks).
1999-06-13 17:21:18 +00:00
19e64942a2
don't printf(NULL), not even in the DEBUG case
...
(It doesn't hurt the bootloader, but the junk output hangs my serial
console.)
1999-05-15 15:42:23 +00:00
998ac16bb7
add some casts for gcc -Wall, from David Rankin
...
<drankin@bohemians.lexington.ky.us> per PR port-i386/7554
1999-05-11 19:57:05 +00:00
6959d736df
make sure the ./machine link is created early enough for specific targets,
...
fixes PR port-i386/7553 by David Rankin <drankin@bohemians.lexington.ky.us>
1999-05-11 19:43:09 +00:00
fe310dd299
include <lib/libkern/libkern.h> for intoa()/inet_ntoa()
1999-05-07 16:19:27 +00:00
4fbaa0b272
Restrict "out of CHS range" check to harddisks.
1999-05-04 17:14:55 +00:00
ec559f688b
Be more careful with saving registers around the "out of CHS range" check.
1999-05-02 12:44:34 +00:00
57e4b98787
- Use the proper multiply instructions so that we don't get truncated.
1999-04-30 15:31:17 +00:00
48003b2c88
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
1999-04-28 23:24:42 +00:00
c5ec77e01b
use new loadfile
1999-04-28 09:14:22 +00:00
5317a4673a
Use new loadfile
1999-04-28 09:14:07 +00:00
a030d021a7
Use new loadfile.c
1999-04-28 09:13:51 +00:00
ca053f4364
remove an "unmodified" so that the copyright notice will hopefully match
...
pk's "BSD-style (clauses: 2; no acknowledgements)" pattern
1999-04-22 10:27:16 +00:00
982c55e22c
another nit in error handling: don't try to print out a NULL filename
...
(which means "use default" and is dealt with properly by open())
1999-04-17 11:18:36 +00:00
30ffed2123
remove bogus prototype for getopt
1999-04-14 15:22:46 +00:00
c70b4ad2a1
Add prototype for getsecs
1999-04-14 15:22:07 +00:00
1ecbaaabf8
this is now sys/lib/libsa/ufs_ls.c
1999-04-14 13:31:49 +00:00
6cde76c6fe
fix some copyright foo.
1999-04-14 12:56:33 +00:00
e4841b3edf
add prototypes, use ufs_ls() from mi libsa,
...
compile with -Wall -Wmissing-prototypes -Wstrict-prototypes -Wno-main
1999-04-14 11:53:43 +00:00
312eae2bf4
add prototypes, use ufs_ls() from mi libsa, revert to "void main()",
...
compile with -Wall -Wmissing-prototypes -Wstrict-prototypes -Wno-main
1999-04-14 11:45:39 +00:00
dd0ed4267b
add prototype
1999-04-14 11:19:23 +00:00
2d1e6a1f5a
add prototypes, slight formatting changes
1999-04-14 11:17:04 +00:00
ffd8d7c6d0
add prototypes
...
being here, format ala KNF
1999-04-14 10:57:59 +00:00
7d5e1f9211
fix error handling: almost all errors were ignored
1999-04-09 20:12:57 +00:00
552f55e726
Call bi_getbiosgeom() after loadfile() returned successfully. This avoids
...
a memory leak if loadfile() gets an error.
1999-04-08 18:21:15 +00:00
christos