legitimate for this to be set if vm_set_page_size() hasn't been called (it's
how the page size is communicated to vm_set_page_size()). Instead, test
for page_shift == 0; this is one of the values that vm_set_page_size()
initializes.
to vm_bootstrap_steal_memory(), since we may need to steal memory from
a direct-mapped segment at this early stage of the game (on e.g. MIPS
and Alpha).
This interface is activated by defining PMAP_STEAL_MEMORY in <machine/pmap.h>.
Otherwise, the pmap_virtual_space() prototype is in-scope for use by
vm_bootstrap_steal_memory().
results in reserved ephemeral ports starting at the top (as per
current practice), and shouldn't have a negative effect on normal
ephemeral ports...
* initialise inpt_lastlow in in_pcbinit
called "MACHINE_NEW_NONCONGIG". this is required for UVM, the new VM
system (also written by chuck) that is coming soon. adds new functions:
vm_page_physload() -- tell the VM system about an area of memory.
vm_physseg_find() -- returns index in vm_physmem array that this
address is in.
and several new versions of old functions/macros defined in vm_page.h.
this is the sparc portion.
called "MACHINE_NEW_NONCONGIG". this is required for UVM, the new VM
system (also written by chuck) that is coming soon. adds new functions:
vm_page_physload() -- tell the VM system about an area of memory.
vm_physseg_find() -- returns index in vm_physmem array that this
address is in.
and several new versions of old functions/macros defined in vm_page.h.
this is the MI portion. sparc, and then later i386 portions to come.
all other ports need to change to this ASAP! (alpha is already being
worked on)
enabled with the LOCAL_CREDS socket option on the listener. Semantics are
similar to BSD/OS's:
- Creds are available with first data on SOCK_STREAM, and with every datagram
on SOCK_DGRAM.
- It is not possible to forge credentials.
Different in that:
- Different credential data structure (ours does not rely on the format
of internal kernel data structures, and does not pass the login name).
- We can pass creds and file descriptors at the same time (this does not
work in BSD/OS).
Luke Mewburn <lukem@netbsd.org> gets credit for inspiring me to implement
this. :-)
* IP_PORTRANGE socket option, which controls how the ephemeral ports
are allocated. it takes the following settings:
IP_PORTRANGE_DEFAULT use anonportmin (49152) -> anonportmax (65535)
IP_PORTRANGE_HIGH as IP_PORTRANGE_DEFAULT (retained for FreeBSD
compat reasons, where these are separate)
IP_PORTRANGE_LOW use 600 -> 1023. only works if uid==0.
* in_pcb flag INP_ANONPORT. set if port was allocated ephmerally
- make sure all sigreturn error conditions are reported to the caller,
instead of the place jumped to.
This is the bugfix part of pr 4628 by ITOH Yasufumi.
The performance optimization part will be handled seperately, after evaluating
its implications.
Testing on 68040 and removing the performance change from the proposed patch
by scottr. Half of the Amiga machdep.c change had to be done manually by me,
as the patchfile didn't apply cleanly.
XXX Yes, Amiga should be changed to use the common sig_machdep.c instead.
XXX Really soon now. I promise.
function (thought, we might revisit that later). Just call pmap_pinit()
in pmap_create(), instead of inlining what pmap_pinit() does.
Also, g/c a TAILQ_FIRST() macro that is now defined in <sys/queue.h>
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
* support sysctl net.inet.ip.anonportmin (lowest ephemeral port)
and net.inet.ip.anonportmax (highest ephemeral port).
these can't be set to >65535, < IPPORT_RESERVED (unless IPNOPRIVPORTS
is defined), and anonportmin has to be < anonportmax.
* use a cleaner way of only cycling through the available set once;
this will be useful for when a random allocation scheme is used
* define IPPORT_ANON{MIN,MAX} instead of IPPORT_USER{LOW,HIGH}
so_linger is used as an argument to tsleep(), so was stuffed with
clockticks for the TCP linger time. However, so_linger is set directly from
l_linger if the linger time is specified, and l_linger is seconds (although
this is not currently documented anywhere). Fix this to set the TCP
linger time in seconds, and multiply so_linger by hz when tsleep() is
called to actually perform the linger.
The problem is that the timespec structures now how 7 32-bit values before
them, which causes them to be implicitly padded on the Alpha (because the
timespecs have an alignment of 64 bits). However, the alignment constraints
changed if _POSIX_SOURCE was defined (thus replacing the timespecs with
time_ts and longs). This had no effect on 32-bit architectures, but changed
the offsets of several stat structure members on the Alpha.
XXX The ABI has not changed; explicit padding is added in the _POSIX_SOURCE
XXX case, enabled by an #ifdef __alpha__. This should be changed if the
XXX stat(2) ABI is ever changed again (e.g. if we change time_t to 64 bits).
3BSD vfork(2), i.e. share address space w/ parent and block parent.
Keep statistics on the total number of forks, the number of forks that
block the parent, and the number of forks that share the address space
with the parent.
Store the page {0,1} base and length registers in the pmap structure,
and implement pmap_activate(), which stores them in the PCB (for the
hardware's use).
- Re-implement pmap_pinit(); allocate the PTEs here, not in cpu_fork().
page {0,1} base and length registers in the pmap structure. They will
be loaded in to the PCB when the process's address space is activated
by way of pmap_activate().
- Remove pmap_pinit() macro; it's now a real function.
- Prototypes for pmap_pinit(), pmap_activate(), pmap_deactivate().
backoff mechanism we use for receiving the response. This is particularly
helpful when we have transient errors on transmit, e.g. a very busy
network or router.
- When running the slow timers, skip PCBs in LISTEN state.
- When processing the persist timer, drop the connection if the connection
idle time exceeds the maximum backoff for retransmit. Part of
kern/2335 (pete@daemon.net).
- If we fail to allocate mbufs for the outgoing segment, free the header
and abort.
From Stevens:
- Ensure the persist timer is running if the send window reaches zero.
Part of the fix for kern/2335 (pete@daemon.net).
it in initializing during autoconfig. Similar to sys/arch/sun3/dev/zs.c
revision 1.47. Ought to fix hangs at first tty access reported by
Johnny Lam, <jlbg+@andrew.cmu.edu>.
The sysctl'able variable "tcp_init_win", when set to 0, selects an
auto-tuning algorithm for selecting the initial window, based on transmit
segment size, per discussion in the IETF tcpimpl working group.
Default initial window is still 1 segment, but will soon become 2 segments,
per discussion in tcpimpl.
in tcp_output(), and it will only be cleared in tcp_output() if the ACK was
transmitted sucessfully. Also, don't count delayed ACKs here, let tcp_output()
count them.
gateway=server:255.255.255.0 because that is the perferred format,
and the sys/libsa code already knows how to parse that format.
(Copied ip_convert here from the libsa code.)
the case mentioned in the PR was fixed as part of PR/2582. There was a similar
case though that was not handled as part of my initial fix, which was fixed
in FreeBSD. I applied the remaining part from FreeBSD and the code matches
now the FreeBSD respective version. [this probably should be pulled up for 1.3]
performance hit, and on an 80386 processor, it most certainly is. Pull it
from the GENERIC (and DISKLESS "generic") kernels--configure it in
yourself if you actually need it.
16M, thus eating up all candidate bounce pages, which are not allocated
until autoconfiguration runs, by deferring allocation of the buffer
cache pages until after autoconfiguration has run.
XXX This is safe because the i386 port doesn't read any disklabels
XXX during autoconfiguration.
ourselves, but this can still happen on a 386 in copyout & friends.
Fixes pmap_changebit panics seen on 386s. Thanks to Juergen Hannken-Illjes
for providing detailed info on bug occurances.
to the TLB dump routines arguements. Machines would die horibbly when
trying to dump the TLB entries in DDB. Also don't explicitly "page" the
output, since db_printf takes care of that.
causes the MI interrupt handler to barf when we get a 5380 RST interrupt
while probing. Worse, the VIA latches the interrupt, so simply having
all interrupts disabled during autoconfig doesn't resolve the problem.
[I demonstrated the latter on a IIci, which erroneously reports a
reselection attempt(!) after autoconfig is complete. The latched
interrupt results from the SCSI bus reset we do when initializing the
bus.]
Since interrupts must be enabled during autoconfig anyway (sigh), test
to see if autoconfig has completed in sbc_irq_intr(). If not, we don't
pass the interrupt up to the MI interrupt handler. Also, make sure to
clear the VIA interrupt if we're servicing an unclaimed 5380 RST
interrupt.
Thanks to Bill Studenmund for providing the key insight needed to unlock
this problem.
- allow get/set of enums SUNAUDIO_SOURCE and SUNAUDIO_OUTPUT rather
than returning EINVAL
- add missing SUNAUDIO_MONITOR_CLASS case in query_devinfo
- convert SUNAUDIO_MONITOR case from a MIXER_CLASS to a MIXER_VALUE
like it is supposed to be
- the labels for outputs/record class were swapped: fix it
this patch allows "mixerctl" to work properly on a sparc
thorpej