a10888f463
roll ISP 1080/1240 f/w to latest level
1999-05-12 16:45:04 +00:00
e6a460c3f3
roll ISP1040 and ISP2100 f/w to latest release
1999-04-04 01:21:02 +00:00
d3fb0e2ad5
roll internal tag level
1999-03-25 19:41:47 +00:00
690045798e
roll internal tag
1999-03-17 05:11:57 +00:00
72c7f98bd8
add in 1080/1240 f/w, plus options to not compile stuff in
1999-03-17 05:11:13 +00:00
ee72ee212e
darn- 7.55 seems to be a little unstable- go back to 1.31
1999-01-31 04:56:20 +00:00
513722ba25
Grrr.. Do the *correct* and *usable* 1.31 firmware. You have to power
...
cycle to get rid of the old 1.31 firmware. *@!$&^@&$!&^&^!!!!!
But anyway comment it out and use new SBus 7.55 firmware. We get fast posting
with this as well as 32 luns and target mode support.
1999-01-30 07:18:59 +00:00
09ce6222fc
roll internal release tag
1999-01-30 07:14:26 +00:00
9ccf227085
clean up header
1998-12-28 19:07:38 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
4275b01a08
Adjust copyright notice to reflect that Qlogic still owns this.
...
Move SCSI f/w to 7.55 level. Move FibreChannel f/w to 1.13 level.
1998-09-08 07:13:11 +00:00
0456723423
Adjust copyright to reflect that this is really still owned by Qlogic
1998-09-08 07:06:57 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
5cafda5b3c
Update 2100 F/W to 1.10 level. Also remove some older 2100 f/w versions.
...
This version of the 1.10 f/w is initiator only (not initiator/target).
1998-01-28 06:09:02 +00:00
fd208bedb2
Rev up to 1.09 FC f/w, but keep 1.07 around- 1.09 is a little strange.
1997-12-05 19:42:32 +00:00
d90bb02e10
oops on a comment- it is 1.07 FW, not 1.05
1997-12-03 00:45:05 +00:00
fee73b1391
Roll to 1.7 F/W level.
1997-11-17 05:07:02 +00:00
20d01ea842
Updated f/w from Qlogic.
1997-11-02 22:10:57 +00:00
38ea6714c9
New microcode release (1.02) from qlogic for the 2100.
1997-09-19 14:15:54 +00:00
695bb7c37e
Addition of PCI Qlogic ISP2100 (Fibre Channel) support meant a slight
...
change in f/w layout.
1997-08-16 00:30:37 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
mjacob