- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.
This address kern/18407
On amd64, sparc64, i386, and alpha, they will be compiled in and disabled
by default. That means that to use them you either enable the "global"
knob with sysctl, or use paxctl(1) to enable it on a per-program basis.
On sparc and macppc just include a commentd out line in the GENERIC kernel.
The PIOBM is used by only one driver (will be added later,
stay tuned) and intruduce an attribute "ata_piobm" so that
it will be conditionally compiled in.
The "ata_dma" (busmastering transfer using ATA DMA mode) and
"ata_udma" (busmastering transfer using ATA Ultra DMA mode)
attributes are also added for consistency, but unused for now.
(1) failsafe.c allows character input from the failsafe
console device. This is the early console device that is used for output before
the pmap layer is initialized.
(1) locore.S: make sure that the size of the cacheline for
dcbz is set to the default of 128 bytes. It also sets up other mode bits on
the 970. This fix allows the G5 to boot into full multi user mode using a
NFS mounted root file system.
Setup cache bits in HID5 early on so that dcbz/icbi use the
128 byte cache line size. The mismatch was causing dynamically linked
apps to randomly coredump.
With this fix, the G5 can boot into full multi-user by using a NFS
mounted root file system.
already an attachment to the interface attribute (atapi and scsi).
Part of PR#34085, although it is the contrary to what the submitter
suggests (which shows that having both in a config file can be confusing).
so that the "config_found" can't hit "i2cbus".
Up to now, this relied on the fact that the i2cbus and ki2c
attach args both had a string as first element which was used
to distinguish. Now, interface attributes should take care
that attach arguments are not misinterpreted.
to the screen on which they are being called. The driver cannot guess
this by itself but it is needed to implement, at least, the getwschar and
putwschar functions in the correct place. There are no functional changes
yet.
Tested on i386 (vga, vga_raster, machfb, vesafb), macppc and sparc64.
Suggested and reviewed by macallan@.
Use the opt_ah.h for the provided HAL to get options like AH_REGOPS_FUNC.
Add AH_REGOPS_FUNC to a few opt_ah.h that don't have it in this version
of the HAL but need it. (The next version from Sam should have this fixed
in it. If it doesn't, then we'll have to take care at import time.)
Ultimately, this should make future imports even easier, and individual ports
should not have to worry about whether AH_REGOPS_FUNC is properly defined or
not, since the opt_ah.h will just take care of it automatically.
Ok'd by dyoung@.
the rules due to needing to conditionally postprocess the HAL object file.
Macppc needs a a non-ELF HAL (EABI) object, so take care of that by default
in the atheros include file.
http://mail-index.netbsd.org/tech-net/2006/03/15/0000.html.
The new layout almost precisely matches FreeBSD, and should make
future imports much easier.
At the same time, import the current 0.9.16.16 HAL from FreeBSD. According
to sam@, this is the proper version we should be using.
ones and those for specific machines of developers. PR 32304.
OK'ed by rpaulo.
N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".
- use vmspace rather than proc or lwp where appropriate.
the latter is more natural to specify an address space.
(and less likely to be abused for random purposes.)
- fix a swdmover race.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
This fixes a whole bunch of weird errors that plague(d) mesh forever, like
- failure to spin up drives automatically
- occasional bogus 'drive offline' messages
- LONG delays when trying to use a ZIP drive
It will probably expose more problems, we'll see.
an overflow occurs.
. Make this error a fatal build time error
. Move the support for dbsym into the MI Makefile.kern.inc,
conditional upon the SYMTAB_SPACE option being defined in
the kernel config file.
- allow the super user to mmap() the PCI IO area corresponding to ofb at offset
0xf2000000 - needed by some XFree drivers ( approved by Bill Studenmund )
- add a hack to allow mmap()ing offset 0xa0000 - 0xbffff if not covered by the
regular framebuffer mapping at offset 0 ( disabled by default, use options
OFB_FAKE_VGA_FB ) - this allows buggy XFree drivers which expect the VGA
framebuffer at this address to work.
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.
The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.
Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.
OK'ed by my project mentor, William Studenmund (wrstuden@).
Stop including dev/pci/files.ath in arch/i386/conf/files.i386,
since we get the same definitions by including dev/pci/files.pci,
now. Remove dev/pci/files.ath.
Add arch/macppc/conf/Makefile.macppc with directives for linking
the Atheros HAL for PowerPC.
In athhal-powerpc-be-eabi.opt_ah.h, #define AH_REGOPS_FUNC 1, since
otherwise the linker complains that the PowerPC HAL cannot link
with register-read/write subroutines.
Add ath(4) to the GENERIC macppc kernel configuration; comment it
out.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.
Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.
is set.
Note that only the first argument needed to be constified to solve the issue,
but given the usage of the arguments in the function, it's worth to constify
all of them.
happy in the presence of the "volatile int flag" construct. Fix up a variety
of calls to pass NULL instead of (Ptr)0 to maintain function-pointer safety.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.
to select the maximum segment size for each bus_dmamap_load (up to the maxsegsz
supplied to bus_dmamap_create). dm_maxsegsz is reset to the value supplied to
bus_dmamap_create when the dmamap is unloaded.
type for PMU / battery information, then uses that when getting battery
information for APM. Allows older PowerBooks (pre-smart batteries) to
function with apm enabled in the kernel. Thanks to Linux code for battery
information for these old batteries. Something is still odd, though,
because a charging battery can show > 100% when it's near to full charge.
Enable more interrupts from PMU and handle PB3400 card eject buttons
properly, too.
Also use #defines for commands instead of raw hex codes.
- Ffs internal snapshots get compiled in unconditionally.
- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.
Reviewed by: Jason Thorpe <thorpej@netbsd.org>
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.
XXX: we _need_ some way of making this more simple.
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
where there might be devices under two I/O bridges (like PowerBook G3s).
Attempt to have devices under 'gatwick' share parental interrupt. This
may still need some work, but a step in the right direction.
From Tim Kelly.
the mediabay interrupt as an internal interrupt.
- Simplify gc_reenable_irq() a bit.
- Ensure that interrupts are off when we call gc_reenable_irq().
- Make the handling for stuck interrupts on old-style interrupt controllers
a bit more robust. If we get stuck interrupts, don't panic. Just disable
them.
response from the device that had 120 bytes of data. The lack of any
bounds-checking in pm_direct.c allowed that data to smash the stack in
the interrupt handler.
1. Reset SCSI bus & MESH on reboot to keep OF happy.
2. Tweak interrupt handler to clear interrupt register again if we get a
CMDDONE interrupt with DMA active and a 0 fifocnt. It's not clear why
this is necessary, but is well documented in some other open source
drivers. This enables synchronous mode to work.
3. Dump a little more information if we do get a timeout.
the hardware. Inspired by Michael Lorenz with some hints from OpenDarwin
sources. Thanks to Michael for beginnings of the patch and for both
discussion and testing. Thanks to Tim Kelly and Riccardo Mottola for
further testing.
and perhaps PowerMac 9500. These slots sit behind a PCI-PCI bridge, and
devices in those slots inherit the PCI-PCI bridge interrupt. Derived from
a patch submitted in PR port-macppc/26341 by Michael Loreny, who was also
diligent in prodding me to look at it.
property instead of 'interrupt-map' and 'interrupt-map-mask' properties.
Adjust for this by checking for the latter, and if they're not present
(and the parent isn't 'pci-bridge'), then look for 'AAPL,interrupts'.
Problem analyzed and patched by Tim Kelly on port-macppc. I modified the
patch to move the fallback into find_node_intr(), tweaking some previously-
disabled code.
Tested by Tim Kelly.
Also patched from Tim to
- Delay longer for second CPU spinup.
- Only attempt to print CPU speed and cache configuration on certain
CPU types.
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
kernel will panic if an USB keyboard is plugged later.
Of course there will be a problem on a desktop machine with an USB attached
keyboard, but that cannot be fixed without access to such a machine..
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.
newer machines (iBook G4), it is in pseudo-hid (without typo), and there
are no `adb-kbd-ihandle or `usb-kbd-ihandles methods. In that situation,
just try to attach anything we can.
This patch fixes spurious inputs on iBook G4.
property of "/chosen" node in OF tree. On newer machines (e.g: iBook G4),
this property does not exist. We look for the node "mpic" as a second attempt
after a failure in /chosen.
This makes the iBook G4 keyboard almost usable (there are still some spurious
inputs on system startupi)
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
