aef9e7bea3
Code to handle generic ten-bit interfaces (1000BASE-{LX,SX} fiber
...
interfaces).
2001-07-12 18:49:38 +00:00
0e863b15a6
Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY.
2001-07-12 17:30:45 +00:00
9987ee5249
Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
...
PHYs. This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
628a67ab31
Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
...
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
ea313649ff
defopt MIIVERBOSE
2000-06-11 02:13:34 +00:00
0738a5d4ac
Driver for the Davicom DM9101 10/100 Ethernet PHY. This PHY is found
...
on several inexpensive 10/100 Ethernet boards (e.g. D-Link DFE-530TX,
Winbond 10/100 boards), and is also the built-in PHY on the DM9102
10/100 Ethernet chip.
2000-02-02 04:29:49 +00:00
b67d4809ed
Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
...
Ethernet PHY.
1999-12-07 19:36:37 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
5bec554354
Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
...
some 3c905-TX?). Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
f0d19c2ee1
Change the name of the attribute to "mii".
1998-08-11 00:05:36 +00:00
e7643533b6
Adapt to MII layer changes.
1998-08-11 00:03:12 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
095c4c092d
Adjust for config changes.
1998-01-12 09:23:08 +00:00
fff05a68ab
RCSID Police.
1998-01-05 07:31:05 +00:00
10fcf021a5
Generic functions for the MII layer. mii attaches to mii-capable network
...
adapters, and provide media-selections and status to the parent.
This includes drivers for the Thunderland integrated PHY, and
National Semiconductor's DP83840A.
Note: The interface betweeen network controller and mii is not complete yet,
and will need some minors tweaks to support media auto-selection.
1997-10-17 17:33:45 +00:00
thorpej