30654f3e89
Split out from if_le_isa.c - this card is quite different.
...
The driver is known not to work (timeout on send attempts).
1998-04-16 18:00:14 +00:00
02157092d4
Make the ISA LANCE drivers work without BROKEN_INDIRECT_CONFIG.
...
DEPCA is now split out into a separate driver.
Because there can be only one attachment of a device to a bus, for
each card type a separate pseudo-bus was introduced which attaches to "isa"
and where "le" attaches to.
1998-04-16 17:51:46 +00:00
10860a27c6
Don't use KS_GROUP_xxx values which have set something in the lower
...
8 bits. This allows to OR them with keycodes.
This is probably a workaround for namespace confusion happening else-
where (in wskbdutil.c:ksym_upcase() perhaps?), but it helps without
too much digging into the details.
1998-04-16 13:29:41 +00:00
3cc1fe831c
count allocated screens correctly
1998-04-16 12:52:42 +00:00
112b5de402
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
d3febbb5aa
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
...
since the driver only supports little endian busses.
1998-04-16 07:12:43 +00:00
b66dd55f59
Backout endian changes here (per discussion with Justin) and move them to
...
aic7xxx.c
1998-04-16 07:07:37 +00:00
ca0d504418
some attributes are now global
1998-04-15 20:29:16 +00:00
0c199c88be
add MI ISA VGA and the speaker driver
1998-04-15 20:26:53 +00:00
2c823077d7
MI driver for the ISA speaker, and the IBM BASIC playstring interpreter
...
which has so many fans.
1998-04-15 20:26:18 +00:00
aadda67e18
add mi PCI VGA and TGA
1998-04-15 20:17:17 +00:00
eda73f204f
The "mi" TGA driver. It's still not of much use on anything but alpha
...
because it depends on initialization by the firmware.
Further, an mi mmap() is needed...
1998-04-15 20:16:30 +00:00
ac2ca72a01
a tab crept in
1998-04-15 16:52:37 +00:00
6ea0ab26e2
Don't reference functions defined in isadma.c if we don't have to,
...
since we might not have any ISA DMA-using devices configured, thus
isadma.c won't be compiled. Fixes a problem reported by Kevin Lahey.
Also, since there are only 8 DMA channels, don't bother checking
DRQs 8 - 15.
1998-04-15 01:53:47 +00:00
334ef5a59c
Fixup RCS IDs.
1998-04-15 01:45:43 +00:00
8c1b46c2f5
Remove the `delay port' stuff since nothing uses it anymore (can't reliably
...
use it on modern chipsets).
1998-04-15 01:44:23 +00:00
a95c0ac15a
Add pci_conf_print(), a function to dump the PCI configuration space, useful
...
in driver debugging. From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>,
PR #4249 .
1998-04-14 21:24:50 +00:00
ce28bee247
Add UDF and 66MHz capable bit definitions for the PCI status register.
...
From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>, PR #4249 .
1998-04-14 21:22:44 +00:00
ddf189f7da
Remove the stuff that was apparently not intended for commit in the
...
previous change.
1998-04-13 22:18:03 +00:00
993dcaa947
Add another device, YMH0021. From nathanw@MIT.EDU, PR #5289 .
1998-04-13 13:19:40 +00:00
4bcd8130fe
t_wopen fixes.
1998-04-13 12:14:42 +00:00
76970a00f5
trim ID of ST19171FC so that SUN drives are caught
1998-04-10 17:13:11 +00:00
db453b872d
Add support for the VIA Technologies VT86C926, from Kazuki Sakamoto,
...
PR #5256 .
1998-04-10 01:28:59 +00:00
30244f4eb7
Forgot to initialize sc->ioctl. From Matthias Drochner.
1998-04-09 17:16:57 +00:00
311e30018d
Split wscons/wskbd.c's softc into a static and a nonstatic part.
...
Booting into debugger (-d) now works.
Cleaned wscons/wskbdvar.h. Use the same attach arguments for
console and normal keyboards.
1998-04-09 13:09:45 +00:00
03b9fa0bc1
Change last arg of `vct_mmap_cookie' from `int *' to `bus_space_handle_t *'.
1998-04-07 20:31:26 +00:00
fe60e74148
Add hooks to make exclusive hardware locking possible. This is necessary
...
to make the driver suitable for the atari falcon.
1998-04-07 19:51:57 +00:00
0391896c27
Avoid namespace pollution.
1998-04-07 16:35:42 +00:00
2eea6bd8a4
We can't trust the "delay port" anymore - it doesn't work as expected on
...
newer chipsets. Use delay() instead.
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:23:19 +00:00
ec9776e3ab
Fix calculation of console minor device number.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:06:33 +00:00
7ce1360e4a
Put some diagnostic output inside "#ifdef DIAGNOSTIC".
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:02:25 +00:00
11da32b13c
Clean up diagnostic printouts.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 15:57:48 +00:00
244266226c
Fix typo.
1998-04-07 13:59:38 +00:00
47e698143a
Oops. Forgot RCS ident and copyright.
1998-04-07 13:57:56 +00:00
64f1bb73d6
Initial import of MI keyboard translation for dev/wscons.
1998-04-07 13:43:16 +00:00
b80f703f77
Fix problem with promicuously received packets. (ie. give them to bpf
...
but not fddi_input).
1998-04-07 13:32:06 +00:00
848e8406bc
The fe driver is spilt into ate, fmv and mbe, and this file is no longer
...
necessary.
1998-04-03 04:46:46 +00:00
910e6420e0
Delete entry for fe*.
1998-04-03 04:44:39 +00:00
eb466ba47f
Make sure to unload and recycle the DMA map for a bad received packet.
...
This was (indirectly) the reason for machines `hanging' (actually, looping in
tulip_rx_intr()) with de cards.
1998-04-02 13:49:32 +00:00
5c85ae8778
Don't establish the interrupt handler just to read the MAC address.
1998-03-31 08:13:34 +00:00
be4108fec1
Replace direct `sparc_bus_map()' calls with bus space map method.
1998-03-30 14:21:38 +00:00
b70a7e1752
Didn't compile: add variable `bit' removed by mycroft.
1998-03-30 10:35:03 +00:00
d4da63c6c3
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
5d8b98c7b1
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 23:02:27 +00:00
8f597a8744
Oops; make the table const.
1998-03-29 22:36:42 +00:00
a6b8b01d96
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 22:34:27 +00:00
a3b1c4c87a
Optimize the address CRC routines a bit.
1998-03-29 22:21:12 +00:00
fe7f32954b
Optimize the address CRC routines a bit.
1998-03-29 22:08:03 +00:00
5c8a9ac444
Attach aic at isapnp.
1998-03-29 08:13:43 +00:00
5124116592
ISAPnP attachment for aic6360 (tested with AHA-1520B).
1998-03-29 08:11:50 +00:00
e0436952f0
Split out the verbose printing of scsi messages, so that user programs
...
can use the printing routines.
1998-03-28 21:57:08 +00:00
686a1a1177
Regen.
1998-03-28 06:39:13 +00:00
515d7f04bf
Add the Contaq/Cypress 82C693 PCI-ISA bridge.
1998-03-28 06:38:46 +00:00
2f8f14b311
check vendor against PCI_VENDOR_INVALID instead of 0xffff.
...
Suggested by Soren S. Jorvang.
1998-03-28 02:24:04 +00:00
6108f60999
regen
1998-03-28 02:10:40 +00:00
3371d8f00f
fix bogus produce name tags for 82371FB_ISA and 82371FB_IDE (were 82471FB_*).
...
Pointed out by Soren S. Jorvang. Rename "BAD" vendor id to "INVALID".
1998-03-28 02:09:29 +00:00
9264961c87
add a short delay (5ms) after ATAPI software reset is done, suggested by
...
Soren S. Jorvang <soren@t.dk>. Apparently some devices Really Want this.
1998-03-27 19:32:15 +00:00
46f85eeab2
let all 8 bits go through
1998-03-27 18:26:22 +00:00
cbff98f7ff
fix max() vs min() confusion at 2 places
1998-03-27 18:22:36 +00:00
b9db388b0f
don't use variables declared _inside_ DEBUG in code _outside_ DEBUG
1998-03-26 00:49:03 +00:00
0e4dce88d4
Conditionalize badblock handling on 'HAS_BAD144_HANDLING'. Some ports
...
(like atari) do not support it.
1998-03-25 09:58:24 +00:00
57ca254137
some minor debug printout changes
1998-03-24 23:37:53 +00:00
8adf8abfea
Enable another error message before the driver reboots the machine. It was
...
not being printed if not compiled with DEBUG. Now all situtiations where
the driver gives up should display a message before the reboot.
1998-03-24 20:49:22 +00:00
47d94e4676
fix typo
1998-03-23 16:57:21 +00:00
dbef68a11b
Update for __BROKEN_INDIRECT_CONFIG. Still untested since it is so hard
...
to find testers for these old cards.
1998-03-23 01:00:21 +00:00
fc27ffd92c
update some debugging stuff- also turn off possible ULTRA mode for 1020s
1998-03-22 22:02:29 +00:00
ff0635ab25
Fix error in previous change.
1998-03-22 19:36:52 +00:00
3c346a45ca
The keyboard controller's address range is 5 bytes long - reflect this
...
here.
1998-03-22 15:44:02 +00:00
2390332103
Devices attached to the PC keyboard controller (or its aux port),
...
for use with the new wscons code.
(keyboard map management will change)
1998-03-22 15:41:27 +00:00
b5ec34f082
MI driver for the infamous PC keyboard controller, primarily for use with
...
the new wscons code (but may be interfaced with other drivers as well).
needs testing
1998-03-22 15:25:15 +00:00
013507e321
PCI frontend for sys/dev/ic/vga.c
1998-03-22 15:16:18 +00:00
065733619a
ISA frontend for sys/dev/ic/vga.c
1998-03-22 15:14:35 +00:00
3a43fe7109
initial import of VGA driver backend for use with the new wscons code
1998-03-22 15:11:49 +00:00
b31e63865f
Initial import of cgd's new wscons code.
1998-03-22 14:24:02 +00:00
52c701add6
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. Should be fixed soon.)
1998-03-22 12:50:20 +00:00
5aaf839bc3
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. The driver is replaced
by if_ate, if_fmc and if_mbe and is here for reference only.)
1998-03-22 12:48:41 +00:00
9a8dbd75df
Clone lk20.h (keycode definitions) to /sys/dev/dec.
...
Update source pmax files accordingly.
cvs remove old pmax/dev/lk201.h.
1998-03-22 09:27:07 +00:00
a59689c939
Attach device `mbe' at bus `pcmcia'.
1998-03-22 04:39:56 +00:00
e26f2ce65b
Define new device `ate' and `fmv'.
1998-03-22 04:38:42 +00:00
c02747ba06
PCMCIA bus attachment for MB8696x based Ethernet card.
1998-03-22 04:32:27 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
1164bf0fb5
Define TPLFE_TYPE, which is sub code for CISTPL_FUNCE, for LAN card.
1998-03-22 04:07:43 +00:00
f6dba67570
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
...
slop in case there are clone chips with a deeper FIFO.
1998-03-22 02:36:02 +00:00
2bb5067e13
Move the code to wait for carrier on a tty into a common function, since it
...
depends only on device-independent state bits.
Implement SunOS-style `dialout' devices.
1998-03-22 00:55:37 +00:00
019508faee
Well, I don't have a Cyclades board, but I needed the alpha kernels
...
to compile. I made the changes that seemed to make sense tracking the
shift from TS_WOPEN to tp->t_wopen- but they may be wrong. I wasn't
subscribed to tech-kern so I missed the discussion, and C. Hannum
was not particularly enlightening. Sorry if this isn't quite right.
1998-03-21 23:26:15 +00:00
69fe6f242f
Account for changed bus attachment scheme.
1998-03-21 20:11:30 +00:00
cad3cb3894
ubasetup() must be non-static. (used by QDSS)
1998-03-21 10:24:29 +00:00
834a8ac07a
Fix pasto.
1998-03-21 04:31:10 +00:00
fd620ebb32
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:29:29 +00:00
16566cda09
Remove a bogus initializer.
1998-03-21 04:27:58 +00:00
2ada4b4af1
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:02:47 +00:00
09cde3ae17
compile with -Wall, update for changes to dev/ofw
1998-03-21 02:06:17 +00:00
0a2c48d07f
-Wall
1998-03-21 02:05:17 +00:00
3cc8b411d0
-Wall (one real bug, even!)
1998-03-21 02:04:55 +00:00
bd31517508
check only the Vendor ID (rather than both the Vendor ID and the Product
...
ID) when determining if the Vendor ID is invalid. The spec says that
Vendor ID of 0xffff is invalid, so, it doesn't _matter_ what the product
ID is in that case. Treat Vendor ID 0 as invalid because we always have.
1998-03-20 19:56:19 +00:00
f80f6601b0
Fix a typo in the bus_dma changes.
1998-03-17 21:30:38 +00:00
d2551d5b3f
Use bus-dma functions.
1998-03-16 15:36:17 +00:00
2397f92b38
Implement CDIOCCLOSE.
1998-03-16 04:17:53 +00:00
85687409e1
don't forget to set dma_arg, when using DMA functions. also, minor
...
spacing bogon cleanup. Pointed out by Kazuki Sakamoto in PR 5157.
1998-03-13 16:50:07 +00:00
b9eaff9db8
when considering attaching compatibility-mode channels, try a quick reset
...
and see if anything responds. if nothing (that's attributable to the
PCI IDE controller) responds, then that channel either has no devices on
it or has been disabled (via a non-standard mechanism) by the BIOS. If nothing
responds, don't map the compat.-mode interrupt or attach the wdc to that
channel, because the BIOS is likely to assign that IRQ to a different PCI
device. If that happens, the kernel will panic because that device will
try to map the IRQ level-triggered, but the compat interrupt will have been
mapped edge-triggered. (One possible way around this is to map the compat
interrupt edge-triggered, but it's not clear reading the spec that this
is correct or desirable.)
1998-03-12 23:34:29 +00:00
drochner