christos
ea18ad7974
Run ntalkd as nobody.tty
1997-06-29 19:20:20 +00:00
kleink
44de15e66c
Create ./usr/share/man/{cat,man}3/i386; from Anders Hjalmarsson
...
<Anders.Hjalmarsson@economics.gu.se> in PR misc/3794.
1997-06-26 21:20:19 +00:00
thorpej
650e452081
Before disk checks are performed, do a "swapctl -A -t blk" so that
...
block-type devices are available during disk checks, which may consume
large amounts of memory if large file systems are present. Once "critical"
file systems (e.g. /usr and /var) are mounted, perform a "swapctl -A -t noblk"
to enable swapping on any swap files that may be listed in /etc/fstab.
1997-06-25 23:30:28 +00:00
mrg
790379bb6e
add man5/i386 (noted by erik fair)
1997-06-24 04:23:32 +00:00
lukem
fb34424eb0
* when checking /etc/master.passwd, read in /etc/shells for a list of
...
valid shells and then check each active account against that
* remove unnecessary ()s in a few printf's.
1997-06-24 02:32:38 +00:00
lukem
ff2ea5d139
* take advantage of xargs -0 when finding devices and set?id files
...
* use 'ls -q' in the above, so that characters that may cause problems
in the output are replaced with '?'
1997-06-24 01:16:47 +00:00
lukem
d0b6172bfe
Also check /etc/profile for setting of umask.
...
From Chris Jones <cjones@rupert.oscs.montana.edu> in [misc/3763]
1997-06-23 11:59:30 +00:00
lukem
b07aea8e1c
Ignore blank lines and comments in /etc/exports
...
From Jaromir Dolecek <dolecek@moria.ics.muni.cz> in [misc/3691]
1997-06-23 01:49:15 +00:00
lukem
f067035d68
Add output of `uptime` to report.
...
From Hubert Feyrer <feyrer@smaug.fh-regensburg.de> in [bin/3220]
1997-06-23 01:45:21 +00:00
mrg
537136a76e
add man8/sun3x, man1/i386 and man1/x68k entries.
1997-06-22 06:36:30 +00:00
mrg
9345f4e581
add man8/mvm368k directories.
1997-06-22 06:24:35 +00:00
mrg
cbb4fa0bad
add man1/atari directories.
1997-06-22 05:44:09 +00:00
veego
4056cdf683
Add a comment that you now must have swap entries to satisfy swapctl(8)
...
and add a swap entry for sd0b (copied from the i386 fstab.sd).
1997-06-21 15:40:03 +00:00
mikel
08146f8adc
add /etc/profile
1997-06-21 06:10:03 +00:00
mikel
8736878363
add sample /etc/profile, cribbed shamelessly from csh.login. consists
...
solely of comments.
1997-06-21 06:07:38 +00:00
phil
0ed99f5f61
Correct cdev/bdev for cd*.
1997-06-18 21:09:36 +00:00
perry
0bea2a15f6
Note that you now must have swap entries to satisfy swapctl(8)
1997-06-16 00:58:49 +00:00
is
49e47cbf67
Build device nodes for audio device(s). Currently, only unit 0 == custom chip
...
audio.
1997-06-14 22:43:47 +00:00
mrg
277b52f964
use swapctl instead of swapon
1997-06-12 15:18:58 +00:00
jonathan
7945d5eccd
Move sample configuration files for ultrix, sv4 compatiblity from
...
src/etc/etc.<emul>/ to src/share/emul/<emul>/etc/
1997-06-08 23:31:13 +00:00
jonathan
10efce06ab
Sample /emul/ultrix/etc/svc.conf file for Ultrix compatiblity.
1997-06-08 09:10:21 +00:00
leo
6360466b8b
Add ipfileter stuff.
1997-06-02 20:46:26 +00:00
thorpej
830bea2938
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 7.
1997-06-01 09:23:57 +00:00
thorpej
4baed972cd
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 91.
1997-06-01 09:12:02 +00:00
oki
6806df2da7
Add ipl device
1997-06-01 01:23:36 +00:00
thorpej
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
cjs
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
mikel
d351214af2
bug fix and improvements, mostly from Enami Tsugutomo in PR misc/3681.
1997-05-30 05:18:59 +00:00
perry
b19dbed52b
update to version of May 19, 1997
1997-05-29 01:52:25 +00:00
leo
7b5d0624c9
Add device for new serial port.
1997-05-27 07:05:50 +00:00
cjs
5fd7ce7066
These updates to the build allow building against include files
...
and libs in the object tree, if you use a separate object tree,
while maintaining backward compatability with other build methods.
See the notes in src/share/mk/bsd.README for full details. Note
that the `make includes' target now only installs the include files
in the build directory (if you use one--otherwise they go in DESTDIR
just like before); `make install' will install include files in
DESTDIR.
1997-05-26 03:55:19 +00:00
kleink
7f69979797
Create /dev/ttyaN device nodes for Frodo-based APCIs.
1997-05-23 11:20:27 +00:00
cjs
4112a161ec
Back out last commit; bug was fixed in 1.37, but differently.
1997-05-22 21:41:09 +00:00
cjs
ab82fdc6b5
The interface setup loop was adding every interface in `ifconfig -l`
...
to $configured_interfaces because it never checked to see if if it
actually configured that interface. For this reason it was setting
$configured_lo0 as well, so that never got configured, causing all
sorts of problems.
1997-05-22 21:29:49 +00:00
jeremy
7c78d92d27
Forgot 'cat' directories.
1997-05-21 22:50:12 +00:00
jeremy
768be5bb21
Added architecture dependent subdirectories to man9.
1997-05-21 22:46:08 +00:00
lukem
c7acdd0732
Change interface config test so that the loop is always continued
...
if the interface wasn't configured, so that $configured_lo0 and
$configured_interfaces won't get incorrectly set if $net_interfaces ==
DEFAULT. From enami tsugutomo <enami@ba2.so-net.or.jp> in [misc/3635]
1997-05-17 14:12:24 +00:00
lukem
1b063db228
wrap $configured_lo0 in quotes, so that it doesn't barf if it's not set.
...
noticed by Thorsten Frueauf <frueauf@ira.uka.de> in [misc/3620]
1997-05-15 02:09:27 +00:00
lukem
c20c8f0d8d
fix up minor typos in comments
1997-05-12 23:40:50 +00:00
lukem
54e2fe6d7e
provide empty settings for $hostname, $domainname and $defaultroute,
...
with comments indicating alternation locations for info
1997-05-12 11:33:31 +00:00
lukem
1775d86183
* add support for $hostname, $domainname, $defaultroute and $ifaliases_XXX
...
* only configure lo0 if not configured by the "configure interface" loop
1997-05-12 11:26:10 +00:00
mikel
1e90223347
ntpdate is not a daemon, and add comment for kerberos_server
1997-05-12 05:00:13 +00:00
cjs
0dd1ac7fc9
Make xntpd put its pid in /var/run/xntpd.pid.
1997-05-11 05:08:16 +00:00
gwr
538bd898e9
add /dev/leds
1997-05-06 18:42:27 +00:00
scottr
bf904a4665
Spawn a separate shell for netstart, making sure to check the return value
...
and exit with error if appropriate.
1997-04-29 04:58:38 +00:00
scottr
a35572dc38
Source rc.conf to pick up network-related configuration variables.
1997-04-29 04:55:05 +00:00
perry
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00
mikel
93d6d76d2b
/usr/games/hide is owned by games.games, /usr/src has mode 755,
...
/var/at is owned by root.wheel.
1997-04-25 06:58:52 +00:00
mikel
6b7ae36087
/dev/fd should be owned by root.wheel, mode 755 (like /dev)
...
add 'ignore' tag for /usr/src
tabify, always give uname before gname, octal modes have leading 0
1997-04-25 06:57:23 +00:00
mellon
cd9ae1f9a8
Document dc flag and use it for hardwired lines.
1997-04-24 00:35:47 +00:00